Hello,
I think I just bricked my Kindle Fire HD 2013 KFSOWI running 11.3.2.1.
Here's what I did
- solder a fastboot cable
- download the root utility from this page:
https://
drive.
google.
com
/#folders/0B-dSyq3U-jVDNFZhSW1jd2RuQ0k
(kyleberry.graphics)
- put kindle into fastboot mode
the kindle showed :
AND NOTHING MORE HAPPENED.
I tried to boot up the kindle but it just showed the grey kindle logo (not the orange animated).
Can someone please help me? I searched aroud so many posts without finding a solution.
btw: Drivers installed correctly (eclipse, sdk & kindle drivers)
I think I just bricked my Kindle Fire HD 2013 KFSOWI running 11.3.2.1.
Here's what I did
- solder a fastboot cable
- download the root utility from this page:
https://
drive.
google.
com
/#folders/0B-dSyq3U-jVDNFZhSW1jd2RuQ0k
(kyleberry.graphics)
- put kindle into fastboot mode
the kindle showed :
Code:
Start downloading
writing boot...done
Code:
======================================================================
======================================================================
Welcome to Kindle Root Utility by the KFSOWI Modding Team
Special Thanks to:
Moronig
jcase
fi01
======================================================================
======================================================================
WARNING THIS WORKS ONLY WITH KINDLE HD 7" 2013 ON 11.3.2.1
DOES NOT WORK ON 11.3.1.0
======================================================================
======================================================================
You MUST have your kindle powered OFF and connected to a
FASTBOOT cable
Downgrading Boot Image...
< waiting for device >
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot + recovery + system
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
format <partition> format a flash partition
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
continue continue with autoboot
reboot reboot device normally
reboot-bootloader reboot device into bootloader
help show this help message
options:
-w erase userdata and cache (and format
if supported by partition type)
-u do not first erase partition before
formatting
-s <specific device> specify device serial number
or path to device port
-l with "devices", lists device paths
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address.
default: 0x10000000
-n <page size> specify the nand page size. default:
2048
-S <size>[K|M|G] automatically sparse files greater th
an
size. 0 to disable
target reported max download size of 1005584384 bytes
sending 'boot' (5844 KB)...
OKAY [ 0.324s]
writing 'boot'...
OKAY [ 0.424s]
finished. total time: 0.750s
resuming boot...
OKAY [ 0.001s]
finished. total time: 0.011s
Rooting Device...
AND NOTHING MORE HAPPENED.
I tried to boot up the kindle but it just showed the grey kindle logo (not the orange animated).
Can someone please help me? I searched aroud so many posts without finding a solution.
btw: Drivers installed correctly (eclipse, sdk & kindle drivers)
Last edited: