[prj][XDANDROID][AOSP][FROYO|GINGERBREAD][31.03]SYSTEM UPDATES

Search This thread

babijoee

Retired Forum Moderator
Dec 7, 2008
1,548
163
Melbourne
xdandroidsplash.png


XDANDROID 2.2.2 AOSP

Welcome to the official XDANDROID AOSP thread which is dedicated to getting Android running on our beloved HTC devices.
Phhusson: has dedicated most of his time helping users and updating kernel to run Eclair and his work for other msm7k devices. However phhusson is not alone as there are also other members working on this. You can find some of them on http://www.htc-linux.org. I've listed some of the developers i know of that currently are working on and they deserve credits and thanks. We also have to note that before this work done there was quite a substantial number of people starting working on linux for our devices. Without them we may not be where we are today. So respect and credits to everyone involved in working on linux kernel for msm devices.
I am not responsible for any damages or problems your device encounters. The build is relatively safe and shouldn't cause any problems.


xda-developers signatures

For everyone posting on this thread about problems and issues, I urge you to please specify you're device or more conveniently update you're signature in control panel so it always has the details at the bottom of your posts.


FAQ
This has lots of Q&A and is recommended to go through before posting bugs and problems.
Please read post 1-4 as they have relevant information and is frequently updated.



Overclocking Android on MSM7K


XDANDROID boot-Animation | Wallpaper contest



Thanks to

phhusson, zenulator, Chamonix, Stinebd, Makkonen, MrPippy, cr2, Markinus, bzo, captainoord, glemsom, balsat, viruscrazy and anyone else who contribued or who i forgot :p
Thanks ben_duder for the awesome sig :p


Donations:
Please consider a donation to the XDANDROID project. We work on this on our spare time, sometimes even not on our spare times :p and every little bit gives us more inspiration and motivation to continue providing you our friends awww* great builds and support :)

Thanks to from me and phhusson:

R^7Z | auss81 | Sergej Philipp | Malte Lewan | suksanto | Tyler Brixey | axelo | ElbertF
w3bm4st3r | Kenny Maples | Daniel Krebs | Dan Colardeau | Ghostdogg | Gregory Thomas
Vincent Paoli | nim_ayyan | mindfrost82 | Olivier van der Kruijf | Robert Russell
Kamil Kowalski | Tobias Kästle | Scrog | Mehdi Bouzakri | Jay Onisch | Daren Scroggie
Robert Batty | James Frank | Matthias Helfmann | colo-natas
dcb.insomniacsoft.com | Alexis Perez | Ann Marie Steichmann | Cristian Pereyra
Adam Williamson | Benedikt Wieloch | Brad Stage | Paolo Vernazza | CDK Hosting
Haicheng Wang | Jonas Lejeune | Haicheng Wang | Jonas Lejeune
Adrian Kajda | Wilson Seto | Pedro Aragao | babijoee (yup, myself XD)


Spread the word about xdandroid, please feel free to use this sig created by ben_duder​
 
Last edited:

babijoee

Retired Forum Moderator
Dec 7, 2008
1,548
163
Melbourne
xdandroidsplash.png


Working:


  • Alpha
  • WiFi - "loads" but can't scan for networks
  • Bluetooth - interface hangs in configuration (need to fix init.rc)
  • Power management - Something wakes the phone up immediately, have to look into it
  • SD Card - I have to find a working config for Android to recognize this
  • bzo: anything to do with GPS will cause a crash
  • Accelerometer works
  • Keyboard works
  • Some G-Apps work
  • Brightness control works
  • Scepterr: net location works, NetworkLocation.apk needs to be signed with platform-key
  • Adding linpack and Quadrant benchmark programs for testing ( only built in for now. will be removed in future and more stable packs )
  • Sound works in apps
  • 3D works
  • So far no boot loop :p
  • So far wifi scans now and is trying to get ip-address. Now looking into DCHP
  • Speakerphone works
  • Headset works

    Beta.v1
    1.7.10
  • JIT enabled
  • SDcard fixed
  • adding charmonix ledeffects
  • removing launcher2
  • adding launcherpro as default launcher
  • Added lugiber boot-animation
  • removing some unnecessary apps. will update to let you know what i remove.
  • removed setupwizard / default provision
  • Sound is now working ( stinebd )
  • Updated apns.xml
  • GRPS connections should be more stable now.
  • Removed default music app and replace with cacheinjection Music Mod 1.7.5.1
  • Added Flash10.1 - not working.
  • Adding OIfilemanager
  • XDA-application


    Beta.v2
  • JIT now enabled by default
  • Wifi working with latest rootfs
  • Youtube vids work on low quality.
  • SD card fixed
  • Sound ringtones and notifications issue should be fixed
  • Updated apns.xml from thread
  • Removed default music app and replace with cacheinjection Music Mod 1.7.5.2

    RC1 released.

    RC2.25.7.10
  • Dialer slide to answer re-added.
  • Adding chrometophone
  • Updated Launcherpro, xda, OIfilemanager.
  • Word prediction/dictionary cherrypicked from cyanogen git

    19.8.10
    Nothing major just some
  • General tweaking
  • Bug fixes
  • Removed most apps that caused instability.

    FINAL 17.09.10
    FRX01 by stinebd :)
  • Added full language pack
  • Added Chinese and Japanese IMEs
  • Boot animation speedup (ro.opengles.version=1 sync from upstream)
  • GApps package update (thanks to CyanogenMod)
  • Replace Gallery3D with Gallery, for stability improvement
  • Several changes to enable userland Camera support (from bzo, still needs kernel support)
  • Userland built-in WiFi tethering support for Rhodium (rootfs changes and testing needed)
  • Signed XDAndroid release packages
  • Updated startup configs
  • Using andboot as default root directory

    Startup & conf update 30.9.10
  • Fix raph800 typo.

    25.10.10
  • The following bugs were fixed:
  • Talk.apk missing
  • Buttons cut off in the open call menu.
  • OpenWnn IME selected by default
  • Google Apps updated to 20101020.1
  • Transitioned to hdpi graphics and fonts
  • Ambient light sensor and hardware auto brightness for RAPH and RHOD (WisTilt2)
  • Debug output for battery service emergency shutdowns (by request of camro)
  • Data roaming off by default (can be dangerous for international users) (emwe)
  • armv6j instruction support from cyanogenmod

    FRX03 20.11.10
  • Disable slow background blurring for some dialogs (thanks emwe)
  • Internal improvements to auto-backlight implementation (emwe)
  • Disable JIT by default for various stability improvements
  • Updated gapps package (20101114)

    Bugs fixed:
  • 19 - Boot loop on first boot (fresh data.img)
  • 36 - Repeated Volume button press crashes the system
  • Possibly 12 - Terminal emulator special keys/digits do not respond

    FRX04 24.01.11
  • Improved 3D performance, with fixes for WVGA devices [acl] – IMPORTANT: this requires the accompanying rootfs release from 21 Jan.
  • Synced all minor upstream changes from AOSP

    FRX05 3.03.11
  • Camera support – both photo and video capture (without sound currently) are working. This depends on kernel support, so only Rhodium and Topaz are supported currently. Huge thanks to Jerome Bruneaux (viruscrazy on XDA) for basically doing all the work.
  • Switch build variants from engineering to user-debug for slight speedup.

    FRX06 31.03.11
  • Switched to touch-friendly dialer, along with the VGA layout improvements as seen in Gingerbread
  • Added HSPA icon (for GSM models)

    NEW* XDAndroid Gingerbread build added to thread.
    Check third post for links
  • Further tuned keyboard sizing to be useful on VGA (also made the key labels bigger)
  • World-phone settings support (very important for future RIL enhancements especially on CDMA)
  • Enabled HSPA icon (someone on GSM please let me know if it actually works)


Not Working


  • Sound Recording during video recording



Removed




Added but not yet released



Terms and conditions

Enjoy and remember to post some feedback. :)
 
Last edited:
  • Like
Reactions: timma5 and TRNSLN

babijoee

Retired Forum Moderator
Dec 7, 2008
1,548
163
Melbourne
Downloads

Bundles
22.11.10 | 2.2.1 builds

  • Arrrghhh has built a up-to-date package for people who dont want to download everything. Grab it here: Arrrghhh 2.2.1 update package

    Note: You'll need a new data.img as this package is signed. Otherwise you'll get a bootloop :p
    Also you'll need to select English IME if you want to type in english.




OTA update

24.01.11

  • No OTA update for FRX05

  • The recommended method is the OTA update.zip. However, for users who don't have a completely original FRX02 to upgrade from, the system.ext2 file will be necessary.

    OTA Update procedure (ONLY for users with the original, unmodified signed FRX02 system image)
  • Download update-FRX03.zip to SD card in the same directory as startup.txt and haret, etc
  • Rename update-FRX03.zip to update.zip
  • Boot haret, watch the updater go
  • After updater finishes, it may either reboot or "freeze" (reboot not implemented on device), reboot manually if it freezes
  • Boot haret again, and the new system will start up

Old builds can be located here
Here is a repositories for older releases of XDANDROID and Android1.6 donut files
[/INDENT]


Startup & Conf Updates
30.9.10



zImage Autobuild: ( glemsom / balsat )
zImage are updated quite often but just because its updated, it doesn't necessarily mean it will work 100%. If a new zImage breaks and doesn't boot; load a previous working zImage. thanks


Rootfs Autobuild ( Stinebd )

  • Get the latest rootfs here from the rootfs build service provided Stinebd for XDANDROID


Initramfs Autobuilds ( Stinebd )

  • Get the latest Initramfs here from the Initramfs build service provided Stinebd for XDANDROID


Others


WinMO/Android dual-boot
Yozgatg has released his dual boot WinMo / Android program for everyone to enjoy :)


LiteWM ROM to autoboot linux
MichyPrima has created a lite WinMo that automatically loads haret from your SD card. It loads pretty quick and i can confirm it works :) It has a boot option so just wait until you see Booting countdown and touch the screen.
Reboot, Shutdown, USB mass Storage and Continue Booting Android



CAB-Install for XDANDROID
TheBrilliantMistake has made a convenient program for people out there having installation problems with XDANDROID.
Have a look and see if you like it. If this proves successful we may roll out the updates like this in the future.



Chamonix ledEffects
LedEffects controls how your device reacts to calls, messages, charging and other phone status'



XDANDROID wifi-tether by stinebd
All the required dependencies and modules should now be built into the system/rootfs and so the standalone application should be good to go. Note this will be added into next build.
 
Last edited:
  • Like
Reactions: omidsys and TRNSLN

babijoee

Retired Forum Moderator
Dec 7, 2008
1,548
163
Melbourne
Advanced Users

How to mount system.ext2 to make changes
  • Make sure you are running a linux distro
  • Make a temp folder for mounting. eg: mkdir tempfolder
  • sudo mount -o loop system.ext2 tempfolder
  • Make your changes using nautilus. Google how to use it.
  • sudo umount tempfolder



Load XDANDROID within a custom named folder

  • Set Android directory: "rel_path=XXXXXXXX"
  • Set directory to where you are storing your installation
    Eg: Put all files into folder named xdandroid
    so cmd will be rel_path=xdandroid
Use this if you want to keep you SDcard more organised.



Waiting for SDCard error
For people who have problems with sdcard message, add this to your startup

  • msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave



Turning on led flash

  • echo 1 > /sys/class/htc_hw/flash


Diamond Storage Issues (Storage Card Unmounted)

To fix this issue
  • simply download the HP Format Tool | Mirror
  • Install the tool
  • Start Diamond in WinMo. Connect to computer via usb (Usb Drive). Make sure it is connected. Back up all contents of your internal storage.
  • Run the tool
  • Select your internal storage.
  • Format FAT32 (Full format).
  • Restore items on your internal storage.
  • Load Android
Android should no longer give you a message saying the SDcard is unmounted. This also fixes no media being found when loading android.
thanks hamagc for writing up this guide
adb and usb debugging
To ensure that you are able to use adb and usb debugging you will need to plug in your usb cable to your computer and in winmo select activesync. Now launch haret and once Android is loaded you'll see a notification that will notify you have usb-debugging control and able to use adb.
Guide
Place everything into the root of your sd card for Raphael and Everything in your internal memory for Diamond. Remember to copy the correct startup from the startup config folder.
It should look like this
--root--
\AndroidApps
\conf
\media
-haret.exe
-initrd.gz
-rootfs.img
-system.ext | system.sqsh
-zImage
-modulesXXXXXXXXXXX
-startup.txt
Startup|default configs options
Overclocking
acpuclock.oc_freq_khz=XXXXXX ( i personally use 600000-640000 )
but it very unstable if you try to get higher than 650000-700000

Physical Keyboard layout
physkeyboard=fuze
physkeyboard=raph
physkeyboard=nordic_raph
physkeyboard=tilt2
physkeyboard=rhod210
physkeyboard=rhod100_de
physkeyboard=rhod100_fr
physkeyboard=rhod100_it
physkeyboard=rhod100_uk
physkeyboard=rhod100_nordic
physkeyboard=rhod400
physkeyboard=rhod500
physkeyboard=swiss_raph
physkeyboard=german_raph

Button wake up
board-htcraphael-navi.wake=X
0 = screen only wakes on power button
1 = wakes on any keypress

Onscreen terminal keyboard
msmvkeyb_toggle= (on/off)
on = displays terminal onscreen keyboard
off = hide terminal onscreen keyboard

Headset
snd.force_headset=X
1=USB headset
2=3.5mm headset

Incall volume adjust
htc_hw.call_vol=X
0-5
0: being lowest and 5: being loudest

Enable/Disable handsfree
htc_hw.handsfree=X
1=Enable
0=Disable

Recommended best loud and clear voice values are said to be 5/1
htc_hw.call_vol=5
htc_hw.handsfree=1

Disable low battery Warning
htc_battery_smem.fake=1 (option: 0=off / 1=on) -> will fake the system to think, that USB-CHarger is always connected

htc_battery_smem.vol_min=0 (0-100 -integer value) -> if battery volume is lower as this value, then it set it to vol_min, so it can be handled, that system goes never below this value and so never auto shutdown, could be helpfull, if you want, that the system never reboot from itself

htc_battery_smem.debug=0 (0 | 1 | 2 | 4 - bit-wise) (option: 0=off / 1=battery info | 2=batt cable info | 4=debug info(like statistics all10sec) -> so if you want to log ALL you must add the bits -> like 7

Disable/Enable HW3d
hw3d.force=X
0=off
1=on

LCD density / resolution
lcd.density=XXX
210 = 640x480 VGA devices
240 = 800x480 WVGA devices
Load Haret
Load haret by going into FileExplorer and navigate to where haret is and load it.
Navigation



Note: This is a dummy screen i took from google images :) Its not actually looking like this

1. Power Button
  • Press: Go home screen
  • Hold: Switch between Application

2. VolUP
  • Press: Increase ringtone, media and incall volume

3. VolDown
  • Press: Decrease ringtone, media and incall volume. Can also set vibrate and Silent.

4. Home Button
  • Press: Open up setting

5. Call Button
  • Press: Open recent call
  • Hold: Launch Voice dialer

6. Back Button
  • Press: Goes back one previous screen

7. Call end Button
  • press: Turn off display or end phone call
  • Hold: Set audio on or off, Airplane mode or turn off device

8. Center Button
  • Press: Accept or select. Also used as scrolling, zoom in or out.

9. Android Menu tab
  • Pull up or down to open / close Program tab

10. Notification tab
  • Pull up or down to open / close notification tab

11. USB
  • Plug in USB for adb, USB debugging, charging
 
Last edited:
  • Like
Reactions: TRNSLN

vitusdoom

Senior Member
Dec 1, 2009
275
21
Melbourne
7th! woooooopieeee! hehehe. Throw me something. i'll do extensive, massive, thorough testing on the phone. diam100 here
 

helicopter88

Inactive Recognized Developer
Jul 28, 2009
2,756
3,949
Yeaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaah! I love frozen yogurt!
babijoee you are the best :)
 

babijoee

Retired Forum Moderator
Dec 7, 2008
1,548
163
Melbourne
wow. haven't been so excited like this ever. he he he. hows the battery going babijoee? is it like the eclair?

thanks

According to google JIT should save battery life, so you may or may not see any difference. I haven't tested it long enough and the kernel is still the same so it shouldn't be any drastically better
 

Top Liked Posts

  • There are no posts matching your filters.
  • 9
    xdandroidsplash.png


    XDANDROID 2.2.2 AOSP

    Welcome to the official XDANDROID AOSP thread which is dedicated to getting Android running on our beloved HTC devices.
    Phhusson: has dedicated most of his time helping users and updating kernel to run Eclair and his work for other msm7k devices. However phhusson is not alone as there are also other members working on this. You can find some of them on http://www.htc-linux.org. I've listed some of the developers i know of that currently are working on and they deserve credits and thanks. We also have to note that before this work done there was quite a substantial number of people starting working on linux for our devices. Without them we may not be where we are today. So respect and credits to everyone involved in working on linux kernel for msm devices.
    I am not responsible for any damages or problems your device encounters. The build is relatively safe and shouldn't cause any problems.


    xda-developers signatures

    For everyone posting on this thread about problems and issues, I urge you to please specify you're device or more conveniently update you're signature in control panel so it always has the details at the bottom of your posts.


    FAQ
    This has lots of Q&A and is recommended to go through before posting bugs and problems.
    Please read post 1-4 as they have relevant information and is frequently updated.



    Overclocking Android on MSM7K


    XDANDROID boot-Animation | Wallpaper contest



    Thanks to

    phhusson, zenulator, Chamonix, Stinebd, Makkonen, MrPippy, cr2, Markinus, bzo, captainoord, glemsom, balsat, viruscrazy and anyone else who contribued or who i forgot :p
    Thanks ben_duder for the awesome sig :p


    Donations:
    Please consider a donation to the XDANDROID project. We work on this on our spare time, sometimes even not on our spare times :p and every little bit gives us more inspiration and motivation to continue providing you our friends awww* great builds and support :)

    Thanks to from me and phhusson:

    R^7Z | auss81 | Sergej Philipp | Malte Lewan | suksanto | Tyler Brixey | axelo | ElbertF
    w3bm4st3r | Kenny Maples | Daniel Krebs | Dan Colardeau | Ghostdogg | Gregory Thomas
    Vincent Paoli | nim_ayyan | mindfrost82 | Olivier van der Kruijf | Robert Russell
    Kamil Kowalski | Tobias Kästle | Scrog | Mehdi Bouzakri | Jay Onisch | Daren Scroggie
    Robert Batty | James Frank | Matthias Helfmann | colo-natas
    dcb.insomniacsoft.com | Alexis Perez | Ann Marie Steichmann | Cristian Pereyra
    Adam Williamson | Benedikt Wieloch | Brad Stage | Paolo Vernazza | CDK Hosting
    Haicheng Wang | Jonas Lejeune | Haicheng Wang | Jonas Lejeune
    Adrian Kajda | Wilson Seto | Pedro Aragao | babijoee (yup, myself XD)


    Spread the word about xdandroid, please feel free to use this sig created by ben_duder​
    3
    New froyo release time! Minor update with backports from gingerbread...

    • Switched to touch-friendly dialer, along with the VGA layout improvements as seen in Gingerbread
    • Added HSPA icon (for GSM models)

    Get it at http://files.xdandroid.com/system-FRX06.ext2.zip
    2
    xdandroidsplash.png


    Working:


    • Alpha
    • WiFi - "loads" but can't scan for networks
    • Bluetooth - interface hangs in configuration (need to fix init.rc)
    • Power management - Something wakes the phone up immediately, have to look into it
    • SD Card - I have to find a working config for Android to recognize this
    • bzo: anything to do with GPS will cause a crash
    • Accelerometer works
    • Keyboard works
    • Some G-Apps work
    • Brightness control works
    • Scepterr: net location works, NetworkLocation.apk needs to be signed with platform-key
    • Adding linpack and Quadrant benchmark programs for testing ( only built in for now. will be removed in future and more stable packs )
    • Sound works in apps
    • 3D works
    • So far no boot loop :p
    • So far wifi scans now and is trying to get ip-address. Now looking into DCHP
    • Speakerphone works
    • Headset works

      Beta.v1
      1.7.10
    • JIT enabled
    • SDcard fixed
    • adding charmonix ledeffects
    • removing launcher2
    • adding launcherpro as default launcher
    • Added lugiber boot-animation
    • removing some unnecessary apps. will update to let you know what i remove.
    • removed setupwizard / default provision
    • Sound is now working ( stinebd )
    • Updated apns.xml
    • GRPS connections should be more stable now.
    • Removed default music app and replace with cacheinjection Music Mod 1.7.5.1
    • Added Flash10.1 - not working.
    • Adding OIfilemanager
    • XDA-application


      Beta.v2
    • JIT now enabled by default
    • Wifi working with latest rootfs
    • Youtube vids work on low quality.
    • SD card fixed
    • Sound ringtones and notifications issue should be fixed
    • Updated apns.xml from thread
    • Removed default music app and replace with cacheinjection Music Mod 1.7.5.2

      RC1 released.

      RC2.25.7.10
    • Dialer slide to answer re-added.
    • Adding chrometophone
    • Updated Launcherpro, xda, OIfilemanager.
    • Word prediction/dictionary cherrypicked from cyanogen git

      19.8.10
      Nothing major just some
    • General tweaking
    • Bug fixes
    • Removed most apps that caused instability.

      FINAL 17.09.10
      FRX01 by stinebd :)
    • Added full language pack
    • Added Chinese and Japanese IMEs
    • Boot animation speedup (ro.opengles.version=1 sync from upstream)
    • GApps package update (thanks to CyanogenMod)
    • Replace Gallery3D with Gallery, for stability improvement
    • Several changes to enable userland Camera support (from bzo, still needs kernel support)
    • Userland built-in WiFi tethering support for Rhodium (rootfs changes and testing needed)
    • Signed XDAndroid release packages
    • Updated startup configs
    • Using andboot as default root directory

      Startup & conf update 30.9.10
    • Fix raph800 typo.

      25.10.10
    • The following bugs were fixed:
    • Talk.apk missing
    • Buttons cut off in the open call menu.
    • OpenWnn IME selected by default
    • Google Apps updated to 20101020.1
    • Transitioned to hdpi graphics and fonts
    • Ambient light sensor and hardware auto brightness for RAPH and RHOD (WisTilt2)
    • Debug output for battery service emergency shutdowns (by request of camro)
    • Data roaming off by default (can be dangerous for international users) (emwe)
    • armv6j instruction support from cyanogenmod

      FRX03 20.11.10
    • Disable slow background blurring for some dialogs (thanks emwe)
    • Internal improvements to auto-backlight implementation (emwe)
    • Disable JIT by default for various stability improvements
    • Updated gapps package (20101114)

      Bugs fixed:
    • 19 - Boot loop on first boot (fresh data.img)
    • 36 - Repeated Volume button press crashes the system
    • Possibly 12 - Terminal emulator special keys/digits do not respond

      FRX04 24.01.11
    • Improved 3D performance, with fixes for WVGA devices [acl] – IMPORTANT: this requires the accompanying rootfs release from 21 Jan.
    • Synced all minor upstream changes from AOSP

      FRX05 3.03.11
    • Camera support – both photo and video capture (without sound currently) are working. This depends on kernel support, so only Rhodium and Topaz are supported currently. Huge thanks to Jerome Bruneaux (viruscrazy on XDA) for basically doing all the work.
    • Switch build variants from engineering to user-debug for slight speedup.

      FRX06 31.03.11
    • Switched to touch-friendly dialer, along with the VGA layout improvements as seen in Gingerbread
    • Added HSPA icon (for GSM models)

      NEW* XDAndroid Gingerbread build added to thread.
      Check third post for links
    • Further tuned keyboard sizing to be useful on VGA (also made the key labels bigger)
    • World-phone settings support (very important for future RIL enhancements especially on CDMA)
    • Enabled HSPA icon (someone on GSM please let me know if it actually works)


    Not Working


    • Sound Recording during video recording



    Removed




    Added but not yet released



    Terms and conditions

    Enjoy and remember to post some feedback. :)
    2
    Downloads

    Bundles
    22.11.10 | 2.2.1 builds

    • Arrrghhh has built a up-to-date package for people who dont want to download everything. Grab it here: Arrrghhh 2.2.1 update package

      Note: You'll need a new data.img as this package is signed. Otherwise you'll get a bootloop :p
      Also you'll need to select English IME if you want to type in english.




    OTA update

    24.01.11

    • No OTA update for FRX05

    • The recommended method is the OTA update.zip. However, for users who don't have a completely original FRX02 to upgrade from, the system.ext2 file will be necessary.

      OTA Update procedure (ONLY for users with the original, unmodified signed FRX02 system image)
    • Download update-FRX03.zip to SD card in the same directory as startup.txt and haret, etc
    • Rename update-FRX03.zip to update.zip
    • Boot haret, watch the updater go
    • After updater finishes, it may either reboot or "freeze" (reboot not implemented on device), reboot manually if it freezes
    • Boot haret again, and the new system will start up

    Old builds can be located here
    Here is a repositories for older releases of XDANDROID and Android1.6 donut files
    [/INDENT]


    Startup & Conf Updates
    30.9.10



    zImage Autobuild: ( glemsom / balsat )
    zImage are updated quite often but just because its updated, it doesn't necessarily mean it will work 100%. If a new zImage breaks and doesn't boot; load a previous working zImage. thanks


    Rootfs Autobuild ( Stinebd )

    • Get the latest rootfs here from the rootfs build service provided Stinebd for XDANDROID


    Initramfs Autobuilds ( Stinebd )

    • Get the latest Initramfs here from the Initramfs build service provided Stinebd for XDANDROID


    Others


    WinMO/Android dual-boot
    Yozgatg has released his dual boot WinMo / Android program for everyone to enjoy :)


    LiteWM ROM to autoboot linux
    MichyPrima has created a lite WinMo that automatically loads haret from your SD card. It loads pretty quick and i can confirm it works :) It has a boot option so just wait until you see Booting countdown and touch the screen.
    Reboot, Shutdown, USB mass Storage and Continue Booting Android



    CAB-Install for XDANDROID
    TheBrilliantMistake has made a convenient program for people out there having installation problems with XDANDROID.
    Have a look and see if you like it. If this proves successful we may roll out the updates like this in the future.



    Chamonix ledEffects
    LedEffects controls how your device reacts to calls, messages, charging and other phone status'



    XDANDROID wifi-tether by stinebd
    All the required dependencies and modules should now be built into the system/rootfs and so the standalone application should be good to go. Note this will be added into next build.
    2
    When we can expect new version 2.3? :) :D

    Right after you finish porting it.