[ROM][4.1.2]Stock Jelly Bean LG-E973/1/5/0 [Canada edition][International]

Search This thread

halsafar

Senior Member
Jun 2, 2012
54
5
Saskatoon
sandstormgames.ca
I did a full wipe, including formatting system. Installed the newest AT&T version on a E970.

WiFi password appears to persist across reboots.

SD Card is now mounted to /storage/external_SD/ and this seems to cause the phone to not recognize it. MTP no longer shows the sdcard. Any fix for this? The Camera can't save photos it takes, Gallery shows no files, Settings->Storage shows only internal. Yet my sdcard is mounted and shows up via adb shell ls /storage/external_SD/.
 
Last edited:

dbgeek

Senior Member
Mar 8, 2011
590
184
Atlanta
I presume we still cannot dirty flash from V1 to V3, right? It's supposed to be a clean install?

correct. In fact..

Mandatory that you do a clean Install

in the OP is conclusive proof.

---------- Post added at 01:27 PM ---------- Previous post was at 01:21 PM ----------

SD Card is now mounted to /storage/external_SD/ and this seems to cause the phone to not recognize it. MTP no longer shows the sdcard. Any fix for this? The Camera can't save photos it takes, Gallery shows no files, Settings->Storage shows only internal. Yet my sdcard is mounted and shows up via adb shell ls /storage/external_SD/.

Use QuickPic to see your photos or use the scanmedia app and scan your device (for some, this fixes the gallery access to ext sd card issue). What do you mean "MTP no longer shows the sdcard"? Do you mean, you can't see the card, in windows explorer, if you are connected MTP? If so, then do this: http://xdaforums.com/showpost.php?p=38052435&postcount=453
 

halsafar

Senior Member
Jun 2, 2012
54
5
Saskatoon
sandstormgames.ca
Use QuickPic to see your photos or use the scanmedia app and scan your device (for some, this fixes the gallery access to ext sd card issue). What do you mean "MTP no longer shows the sdcard"? Do you mean, you can't see the card, in windows explorer, if you are connected MTP? If so, then do this: http://xdaforums.com/showpost.php?p=38052435&postcount=453

Done and it didn't work. I can verify that /storage/external_SD is now mounting to /sdcard/external_sd (binding). However MTP and all apps still crash whenever trying to access the sdcard. I see lots of "unfortunately, the process android.process.media has stopped". In fact after adding that script to rbind mount, MTP cannot even load the internal storage. It caused a dozen errors on the phone and Windows Explorer is stuck forever loading the MTP internal storage directory.

For whatever reason after a full wipe and reinstall of the ROM I notice that /sdcard/external_sd is a link to /storage/sdcard1. However my sdcard is mounting under /storage/external_SD. I tried modifying fstab to correct this and I ended up at the same place as the ScriptManager fix you linked. Tons of errors involving the android.process.media process and MTP was completely borked.
 
Last edited:

dbgeek

Senior Member
Mar 8, 2011
590
184
Atlanta
Done and it didn't work. I can verify that /storage/external_SD is now mounting to /sdcard/external_sd (binding). However MTP and all apps still crash whenever trying to access the sdcard. I see lots of "unfortunately, the process android.process.media has stopped". In fact after adding that script to rbind mount, MTP cannot even load the internal storage. It caused a dozen errors on the phone and Windows Explorer is stuck forever loading the MTP internal storage directory.

For whatever reason after a full wipe and reinstall of the ROM I notice that /sdcard/external_sd is a link to /storage/sdcard1. However my sdcard is mounting under /storage/external_SD. I tried modifying fstab to correct this and I ended up at the same place as the ScriptManager fix you linked. Tons of errors involving the android.process.media process and MTP was completely borked.

When you reinstalled your apps did you use Titanium Back Up or some other App manager/back up utility? If so, did you include data? Most people who get the FC's did app install with data. Install without data and your prob should go away.
 

halsafar

Senior Member
Jun 2, 2012
54
5
Saskatoon
sandstormgames.ca
When you reinstalled your apps did you use Titanium Back Up or some other App manager/back up utility? If so, did you include data? Most people who get the FC's did app install with data. Install without data and your prob should go away.

This is a full wipe:
- factory reset, wipes user data
- wipe cache
- wipe dalvik
- format /system
- format /sdcard
- format /data & /data/media
- install rom

No TB, just go right into trying to get the sd card to work. I've tried the Canadian version of the rom and ATT v2 rom. I'm now trying ATT v1 to see if it resolves it.

I also cannot make a phone call. The 'contacts' process crashes the moment I try and initiate a call and prevents the call from starting.
 
Last edited:

cryolithic

Senior Member
Aug 21, 2010
91
11
Vancouver
ATT Version: Confirmed "Unfortunately, Settings Has Stopped" when clicking bluetooth tethering with the latest release installed using guidelines documented in first post. (Factory reset etc)

Telus version, I don't crash on clicking bluetooth tethering, but it doesn't work for me at all. My TF300T can't share the internet connection with it.
 

ATRIXXIRTA

Senior Member
Mar 17, 2012
2,434
768
The Shangri-La Motel
3yry5e5u.jpg
This is a full wipe:
- factory reset, wipes user data
- wipe cache
- wipe dalvik
- format /system
- format /sdcard
- format /data & /data/media
- install rom

No TB, just go right into trying to get the sd card to work. I've tried the Canadian version of the rom and ATT v2 rom. I'm now trying ATT v1 to see if it resolves it.

I also cannot make a phone call. The 'contacts' process crashes the moment I try and initiate a call and prevents the call from starting.

One thing I would try, regarding your SD card, is an app you can find by searching "multimount" in the play store. Its worked for me in similar situations with my old moto atrix.

Sent from my SGH-I727 using Tapatalk 2
 

rxmxsh

Senior Member
Dec 22, 2012
354
108
correct. In fact..



in the OP is conclusive proof.

---------- Post added at 01:27 PM ---------- Previous post was at 01:21 PM ----------



Use QuickPic to see your photos or use the scanmedia app and scan your device (for some, this fixes the gallery access to ext sd card issue). What do you mean "MTP no longer shows the sdcard"? Do you mean, you can't see the card, in windows explorer, if you are connected MTP? If so, then do this: http://xdaforums.com/showpost.php?p=38052435&postcount=453

Thanks. I actually did dirty flash the latest ROM of which was based on V1 without issue. There were 2 of use (in the thread) that did so successfully. I say to others "do this at your own risk". Maybe we were lucky.
 

janocool

Senior Member
Dec 24, 2010
387
10
Cuenca
I did a full wipe, including formatting system. Installed the newest AT&T version on a E970.

WiFi password appears to persist across reboots.

SD Card is now mounted to /storage/external_SD/ and this seems to cause the phone to not recognize it. MTP no longer shows the sdcard. Any fix for this? The Camera can't save photos it takes, Gallery shows no files, Settings->Storage shows only internal. Yet my sdcard is mounted and shows up via adb shell ls /storage/external_SD/.

Same result, got the e970, I root, unlock and install the recommended cwmr, full wipe clean install, boot up and when I try to access the photos that I just take it didnt show in the corner where suppossed to, and stock file manager force close, should warn about this in the first post. How can I back to stock ICS? or maybe a rom wich works?
 

ryancnap

Senior Member
Aug 3, 2012
231
25
Bloomsburg
ryancnap.net
Same result, got the e970, I root, unlock and install the recommended cwmr, full wipe clean install, boot up and when I try to access the photos that I just take it didnt show in the corner where suppossed to, and stock file manager force close, should warn about this in the first post. How can I back to stock ICS? or maybe a rom wich works?

I think the sd card issues are stated in the op, and this thread's definitely full of reports. The devs are working on it. You can find the base and nocturnal roms found in the development section if you'd like, they're ICS. Never used them myself but I've definitely heard alot of good things about both
 

cryolithic

Senior Member
Aug 21, 2010
91
11
Vancouver
Has anyone had issues with LTE on Bell with this ROM? I've been using (along with CM10.1 for short spurts) for a while now and have had zero issues, but haven't had LTE since first flashing it. I originally had to add APN settings for Bell, which gave me data, but it only runs at HSPA+. I've made some minor changes to the build.prop as Houstonn suggested earlier in the thread, but that didn't do it. Anyone have any suggestions? If it makes a difference, I dont' get LTE on CM10.1 either. I'm sure that I'm in an LTE area as it was working without issue on stock. Honestly, it's not a deal breaker, I'd still choose this ROM without LTE over stock with it, but I'd love to have my cake and eat it too.

Try scanning for networks, there are two that come up for bell, if I select one of them, I only get WCDMA and no LTE.

---------- Post added at 09:30 AM ---------- Previous post was at 09:26 AM ----------

Has anyone successfully been able to tether via bluetooth on this Rom?
 

kentek

Senior Member
Mar 22, 2012
84
25
Hamilton Ontario
www.facebook.com
Ringer not working

Has anyone noticed the the ringer hardly ever works or is it just me

and i only have that issue all notifications work and i changed ringers still no dice i miss a lot of calls i hate the idea of going back to 4.0.4
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 90
    Stock 4.1.2 Jelly Bean LG-E973/1/5/0 Canada / At&t / Int'l Edition
    LG-optimusG_jellybean_h.png


    Finally!!! some Jelly Bean Buttery Lovin..... Possibly the best JB for the LG Optimus G!!!
    joint work with sk8erwitskil to build AT&T & Canadian Edition

    Features:

    • E975 base (LG build date Jan.18.2013 tw/hk)
      New Releases based off LG JB build date Jan.23.2013
      rooted
      su / supersu
      busybox
      stock
      carrier debloat
      quickboot
      etc. etc. etc. I'll let you know as I remember

    Install Instructions: - Assuming you've rooted & unlocked already

    • MANDATORY
      CWM - v14.4.5 (i personally use this 1) / v14.4.6 / v14.4.7
      factory reset / wipe
      wipe cache
      wipe dalvik
      format system
      install rom
      enjoy!


      If you want to use TWRP install CWM latest first then flash rom then you can switch afterwards.

    Mandatory that you do a clean Install

    Versions:

    • Jan.31.2013-initial releases
      Feb.2.2013 - v0.2
      Feb.3.2013 - v0.3 Canada
      Feb.8.2013 - AT&T gets it's own releasae
      Feb.8.2013 - Canada gets new release
      Feb.13.2013 - AT&T gets a new base version to try


    Debloated Custom Version - [Canadian] - NEW RELEASE
    V0.3
    >> DOWNLOAD HERE<<

    New Canadian Release - Jan.8.2013
    >> DOWNLOAD HERE <<
    Out of box is Bell - there's Rogers & Telus build.prop renamed in the original folder.. just rename them to using appropiate carrier

    Debloated Custom AT&T - [AT&T] - NEW RELEASE V2 - feb.13.2013
    initial release
    >> DOWNLOAD HERE << flash just the rom no need to flash anything else

    release 2 - new rom base
    >> DOWNLOAD HERE << - thanks JohnCorleone for hosting

    Sprint Debloated Preview - [AlphaTesting]
    testing release
    >> TESTING VERSION <<
    UPDATE: SPRINT KERNEL - Flash Rom first then kenel
    feb.5 - please try this sprint built 3.4 JB kernel >>HERE[/URL] <<
    SPRINT UPDATE test2 in on the second post

    Bloated International Version - [Hong Kong / Taiwan / Australia / Korean]
    initial release
    >> DOWNLOAD HERE <<
    thanks sk8 for hosting this for me.

    REMEMBER to go into settings / keyboard & input to change
    language & also your keyboard language layout

    EXTRAS - all cwm flashable
    • Stock Google Talk that was removed >> HERE <<

      Aosp 4.2 mms - forgot origin to thank >> HERE <<

      Aosp 4.2 deskclock -by gnufabio >> HERE <<

      Cpu (not necessarily needed) >> HERE << --- thanks to lkinansr92
      This fixes the CPU getting stuck at 1188Mhz and Brightness not going higher then 63%

    Thanks

    • Shelnutt2
      Sk8
      Chadouming
      Snowleopardjb
      Elisha - for experimatal testings etc
      JohnCorleone - hosting mirror
      irc #lg-optimus-g
    33
    UPDATES:

    • V0.2
      -trimmed down alittle more. mostly just google stuff you guys can redownload from store
      -added AT&T apns
      -4.2 aosp MMS (stock is still there)

    • V0.3
      -debloated like V0.2 (took out deskclock & mms 4.2 u can guys can flash separately I wanted to keep close to stock as possible)
      -added AT&T / BELL / TELUS / ROGES apns all together from original LG's apn list
      -few other changes
      -other things i''ve forgotten
    Feb.08

    • AT&T gets it's own separate ROM. No need to flash anything else but the rom itself.. (Based off new LG build date Jan.23.2013)

      - Canada gets new release - Bell build.prop is initially on first. there's backup of telus & rogers just rename build.prop to build.prop.bak and rename the one corresponding to your carrier

    feb.13 - AT&T gets new base to try


    • AT&T SCREENSHOTS V2

      1.png
      8.png
      3.png
      4.png

      5.png
      6.png
      7.png
      9.png

    Initial Rom Release Screenshot

    optimus-g-intl.png


    SPRINT UPDATE: TEST BETA 2:
    11
    CPU+Screen_Brightness Fix

    This fixes the CPU getting stuck at 1188Mhz and Brightness not going higher then 63%
    Download and place this file to system/etc and set permissions (644) http://www.mediafire.com/download.php?70ij78x8ab577d0
    10
    I guess I can assume that when I was making the roms and it always stuck for me was cause I already had mine all setup properly for all the phones I was flashing..

    I'll make flashable zips for you guys. I need the build.prop from an ATT the someone has changed and worked..
    I'll do the same for Rogers and Telus

    and for SaskTel, someone can send me their build prop.. I am very busy working on aosp we have a bunch of merges and hopefully having fixed a bunch of things.

    It has been time comsuming trying to please every variant. SnowLeopard is gonna work on things here on for ATT to maybe finalized everything for you guys since I don't own an att.. I've been building these roms blind and been trying as much as I can so you all can enjoy what LG should be giving us already. Please be patient and just report fixes and certain bugs.. just please search and don't double post bugs we already know as I hate cluttering up this thread..

    As for Sprint.. I know I didn't post in your fourms.. I just didn't want to take any attention away from whatever is going on over there. I don't frequent sprint and att forums. Please let me know of all your findings of bugs so I can further provide you with a better release. It's hard working blind.
    10
    There's been a few requests for the LG Backup App so I took it from the International version and made a CWM zip.
    Fair warning - this is the first time I did anything like this so feel free to backup before applying it, but its just a file copy and I installed it without problem on my OG running the debloated version.... or you can just take the .apk and .odex files out of the zip and manually copy them to the /system/app folder and reboot.

    I also extracted the apks for Polaris Office, the super awesome Quick Translator, and the dictionary for the translator (i think?), which were also requested at some point.