[ROM] MiniCM7-2.2.2 [6/7/13]Gingerbread 2.3.7/CM7.2 unofficial port for the pro

Search This thread
By:
Advanced…
StardustGeass

StardustGeass

Senior Member
Jan 7, 2012
771
140
Jakarta
Thank you for this wonderful ROM !! :D
Battery drain seems fixed... I had my phone on for about 8 hours now with wifi on and 3G only, and now it still have 26% of battery after battery calibration.. :)

The rom totally snappy and fast as well ! :D
 
L

LKnight

Senior Member
Aug 8, 2010
299
16
I'm wondering, does squashinput have the same problem than the ones in the over roms ? I mean if you slide the symbol panel too high or down it'll be stuck.

Thnks u :)

Sent from my U20i using XDA App
 
amakaru

amakaru

Senior Member
Jun 27, 2010
56
2
Binh Duong
Xperia XZ2
thanks for the greate works
I have a small issue -> I come to this version from ver 2.1.8 + previous nAa kernel. Now I have ver 2.1.9 and latest nAa kernel but I can not add google account, it just has Coperate or Facebook account !!!
I miss something here??
 
B

bojler

Senior Member
Dec 23, 2010
358
152
LKnight said:
I'm wondering, does squashinput have the same problem than the ones in the over roms ? I mean if you slide the symbol panel too high or down it'll be stuck.

Thnks u :)
Click to expand...
Click to collapse

yes, that bug is still present.

amakaru said:
thanks for the greate works
I have a small issue -> I come to this version from ver 2.1.8 + previous nAa kernel. Now I have ver 2.1.9 and latest nAa kernel but I can not add google account, it just has Coperate or Facebook account !!!
I miss something here??
Click to expand...
Click to collapse

try flashing gapps from first post again.
 
  • Like
Reactions: LKnight and amakaru
StardustGeass

StardustGeass

Senior Member
Jan 7, 2012
771
140
Jakarta
There are some bugs that I found in this ROM :
- Sometimes, when I'm charging with screen off, the screen don't on when I slide the keyboard. At that time, the keyboard light doesn't on as well. The phone itself is still responsive, because when I hold down the menu button, the phones vibrating. The onlyt way I fix this is by removing the battery (as I can't see the power off / reboot menu)

- When clearing the tasks from the notification bar by sliding it right or left, it sometimes stuck in the middle. That way, I can't clear notifications, scroll it up and down (but still can slide the notification bar upside), or touch any widget buttons on the notification bar. The only way to fix this is by restarting the phone.
 
OmegaRED^

OmegaRED^

Senior Member
Oct 31, 2010
2,957
636
StardustGeass said:
There are some bugs that I found in this ROM :
- Sometimes, when I'm charging with screen off, the screen don't on when I slide the keyboard. At that time, the keyboard light doesn't on as well. The phone itself is still responsive, because when I hold down the menu button, the phones vibrating. The onlyt way I fix this is by removing the battery (as I can't see the power off / reboot menu)

- When clearing the tasks from the notification bar by sliding it right or left, it sometimes stuck in the middle. That way, I can't clear notifications, scroll it up and down (but still can slide the notification bar upside), or touch any widget buttons on the notification bar. The only way to fix this is by restarting the phone.
Click to expand...
Click to collapse

Adjust your cpu settings!!! :D
Get a proper tool... buy one in the market.

Set Cpu or Cpu Master Pro

Don't set minimum lower than 122.88 MHz
Choose InteractiveX govender.

Tick apply on boot


Anyone else need any help?
 
Last edited:
minachvim

minachvim

Senior Member
Oct 5, 2011
326
78
Beirut
how to flash the new version

hi guys,
just a question,

can i go directly from nAa10 to nAa11 without going back to stock??:confused:

also can i flash MiniCM7 2.1.9 directly over 2.1.8 without wiping Data??:confused:

i don't want to lose my data and apps even though i already backed up everything but i don't have time to restore everything that's all!

thank you for answering me.:)
 
T

th3discodancer

Senior Member
Oct 20, 2011
779
236
minachvim said:
hi guys,
just a question,

can i go directly from nAa10 to nAa11 without going back to stock??:confused:

also can i flash MiniCM7 2.1.9 directly over 2.1.8 without wiping Data??:confused:

i don't want to lose my data and apps even though i already backed up everything but i don't have time to restore everything that's all!

thank you for answering me.:)
Click to expand...
Click to collapse

Yes, you can, for the 1st part.
For the 2nd part, there's some debate about that, for some people it works, for some people it doesnt. Since you have already backed up, give it a shot.
 
matthias1203

matthias1203

Senior Member
Sep 28, 2011
747
102
Zadar
Some small bug. When put baterry (percentage) then in corner where are icons,some icon sometimes blinking.

Anyone else??

Sent from my U20i using XDA App
 
B

bojler

Senior Member
Dec 23, 2010
358
152
matthias1203 said:
Some small bug. When put baterry (percentage) then in corner where are icons,some icon sometimes blinking.

Anyone else??

Sent from my U20i using XDA App
Click to expand...
Click to collapse

yes, this is known bug.


minachvim said:
this is known to all GB based custom Roms.
Click to expand...
Click to collapse

actually it was fixed in gintonic. maybe slade can help us with that? and also there was workaround in other gb roms to fix blinking by toggling on and off am/pm in cyano clock settings. but unfortunately that doesn't work here in minicm.
 
  • Like
Reactions: ciribaski
StardustGeass

StardustGeass

Senior Member
Jan 7, 2012
771
140
Jakarta
OmegaRED^ said:
Adjust your cpu settings!!! :D
Get a proper tool... buy one in the market.

Set Cpu or Cpu Master Pro

Don't set minimum lower than 122.88 MHz
Choose InteractiveX govender.

Tick apply on boot


Anyone else need any help?
Click to expand...
Click to collapse

Err... At that time I used ondemand with 320 - 768 MHz xD
Is that the ondemand bug ? Well, it's not that often actually, only sometimes..

I'll try interactivex then.. thanks :)
 
You must log in or register to reply here.

Similar threads

nobodyAtall
[ROM] MiniCM7-2.2.2 [6/7/13] Gingerbread 2.3.7/CM7.2 unofficial port for the x10mini
Replies
8K
Views
2M
amnher
amnher
nobodyAtall
  • Poll
[ROM] MiniCM6-1.0.2 [Update 13/6/11], Froyo 2.2.1 / CM 6.1.3 port for the mini
Replies
4K
Views
1M
Little Zed
Little Zed
BPaul
  • Poll
[ROM] MiniCM7Pro - V21 (For Stock kernel)
Replies
3K
Views
1M
W
worlock123
nobodyAtall
[ROM] MiniCM10-4.1.0 [RELEASED] [15/3/13]JB 4.1.2/CM10 for the Χ10 mini pro
Replies
1K
Views
532K
I
ipmshik
stelios97
  • Poll
[ROM][GB-2.3.7] GingerDX | v028b | 07/08/12 | Released
Replies
3K
Views
638K
quebec1
quebec1

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 282
    nobodyAtall
    nobodyAtall
    PresentationSmall.jpg


    Visit Project's page @ google code

    MiniCM7 is part of the FreeXperia project

    Sources are at my Github: MiniCM nobodyAtall

    This ROM is for the X10mini pro
    If you have and X10mini, go here -> http://xdaforums.com/showthread.php?t=1068553
    If you have an X8, go here -> http://xdaforums.com/showthread.php?t=1362585

    MiniCM7 is custom-built, based on CyanogenMod 7, running Android Gingerbread on top of the nAa kernel.​


    Notes:
    • The MiniCM7 and OrangeHaze themes are is made exclusively for the MiniCM7 ROMs. They are not to be used with other ROMs, so DON'T rip them
    • To cookers: If you want to use parts or all of this ROM for your custom cooks, read this first.
    • To everyone: Please don't mirror this ROM
    • MiniCM7 is built for X10mini. It is a stable and the most feature-complete Gingerbread ROM perfect for day to day use
    • This is a team work by DaRk_dOg and me
    • For Troubleshooting common issues visit: http://code.google.com/p/minicm/wiki/Troubleshooting



    FAQs (Many thanks to matmutant)

    If you have a question, please READ THIS before posting and also use the SEARCH button at the top right ->
    searchi.jpg





    If you want a more relaxed chat, or have issues with MiniCM, you can use the following chat server     (Thanks to SafiXS for setting this up!)
    MiniCM chat



    Before posting an issue wipe (factory reset) via CWM at least once.


    Working:
    • Everything


    Features:
    • Built for LDPI
    • MiniCM Update notifications via c2dm (CM Settings -> System -> Update notifications)
    • App2sd / Dalvik2sd compatible with 2.1 app2sd (storing to ext2/3/4 pre-existing partition is detected and mounted as such)
    • Gingerbread's native App2sd (storing to fat)
    • In kernel ClockworkMod recovery v5.0.2.7 and option to reboot into Recovery
    • Modular Undervolting and Overclocking handled CM Settings menu (by default none is active)
    • Extra CM Performance Settings menu for SD Read Cache Speed
    • Extra CM Settings display menu for Ultra brightness
    • Smooth 2D scrolling in menus
    • Dual touch in kernel
    • Mddi lag fix in kernel
    • Native Wifi Hotspot
    • Native USB tethering
    • Flashlight toggle from lockscreen
    • Most of the core components are built from sources


    Bugs: (Please use the project's tracker for reporting bugs. Please file them properly following the template or they will be discarded.)


    Requirements:


    • Instructions:
      • Download the MiniCM7-xxx.zip from the release link that follows
      • Backup your /data contents: contacts, apps, sms, etc. or backup via recovery
      • Move the MiniCM7-xxx.zip to the root folder of your sdcard. Download the suggested Google Apps for CM7 from here (check http://goo-inside.me/gapps/ if you want to experiment with other gapps versions)
      • Unlock your bootloader, if you haven't already. Check http://xdaforums.com/showthread.php?t=1254225 for a nice tutorial
      • Flash the nAa kernel using Flashtool. To to this:
        - Turn off your phone
        - Start the Flashtool\X10FlashTool.exe and select Flash. Then select the U20_nAaxxx kernel firmware (this flashes both the kernel.sin and the loader.sin)
        - Keep the back button pressed while connecting the usb cable. Flashtool should detect your phone and flash the kernel.
        - Once done, disconnect the usb cable and power on the phone.
      • Once the logo appears, press the back button repeatedly to enter CWM.
        - Select 'backup and restore -> Backup'
        - Select 'wipe data/factory reset' (RECOMMENDED)
        - Flash the MiniCM7-xxx.zip. To do this, Select 'install zip from sdcard -> choose zip from sdcard' and select the MiniCM7-xxx.zip
        - Flash gapps
      • Reboot (first boot will take ~2 mins)
      • Once your device has booted, you can navigate to CM Settings -> System -> Update notifications and select 'Register'. This way you can get update notifications on new versions of MiniCM7!
      Please make sure you followed the above steps before reporting any issues, especially 'wipe data/factory reset'


      Downloads: do NOT mirror

      MiniCM7-2.2.2



      Additional comments:

      • (NOTE: With the nAa kernel/CWM, multiboot/encryption is NOT yet supported)


      Thanks!

      • Since I don't have this device, and frankly wasn't going to port my work to the pro, thanks to everyone who volunteered to test and find bugs in this ROM and the nAa kernel:
        gdeliana
        leajian
        siddardha21
        juliuscaesar


      Donate:
      If you are enjoying my work please consider donating: .
      Donations are voluntary but allow me to spend more time on this project.
      ​


      Disclaimer:
      I can't be held responsible if this ROM bricks your device or makes it explode in your hands! Use it at your own risk!
      If any of the apps included in the ROM is copyright-protected, please let me know so I can remove it.
      ​


      Changelog:
      - 6/7/13 MiniCM7 2.2.2 build
      - 10/6/12 MiniCM7 2.2.1 build
      - 29/3/12 MiniCM7 2.2.0 build
      - 11/2/12 MiniCM7 2.1.9 build
      - 29/1/12 MiniCM7 2.1.8 build
      - 28/12/11 MiniCM7 2.1.7 build
    View
    81
    nobodyAtall
    nobodyAtall
    Keyboard lights

    If keyboard lights don't work for you, go to CM Settings and set the levels correctly:
    Code: 
    light sensor value -> k/b brightness value
0-3 -> 255
4-15 -> 255
16-63 -> 255
64-249 -> 255
250-(infinite) -> 0
    View
    67
    nobodyAtall
    nobodyAtall
    Build Changelog:
    (Also viewable on your device via: Settings -> CM settings -> System -> View changelog)
    For a full list of Cyanogenmod changes check the gerrit:
    http://review.cyanogenmod.com/#q,status:merged,n,z
    or:
    http://cm-nightlies.appspot.com

    ### MiniCM7-2.2.2
    * 2.6.32 nAa kernel support

    ### MiniCM7-2.2.1
    * CM7.2 RC4

    ### MiniCM7-2.2.0
    * CM7.2 RC1
    * Small bugfixes
    * Improved scrolling performance
    * Updated adreno libs
    * Media profiles update
    * New bootanimation

    ### MiniCM7-2.1.9
    * Improved proximity and light sensors (should solve screen staying black and skype issues)
    * a2sd scripts by texasice (http://xdaforums.com/showpost.php?p=21222591&postcount=1374)
    * a2sd via CM Settings -> Performance menu
    * Blade lockscreen style
    * Option to remove all stored Wifi networks by long pressing
    * Seperate notifications for MiniCM ROM / nAa kernel
    * Fixed Radio FM app RDS allignment
    * adb over network
    * kernel: 2.6.29.6-nAa-11

    ### MiniCM7-2.1.8
    * Improved 2d/3d performance due to new kgsl drivers
    * Configurable centre clock in status bar (Thanks to Felimenta97 for showing me the implementation by JerryScript)
    * ICS Transition animations
    * ICS Rotation animations
    * Various CM bugfixes (last sync was yesterday)
    * kernel: 2.6.29.6-nAa-10

    ### MiniCM7-2.1.7
    * Suport for X10mini pro (mimmi)
    * (CM) T9 dialer for quickly finding contacts
    * If no boot animation is selected, the MiniCM7 logo is shown
    * kernel: 2.6.29.6-nAa-08

    ### MiniCM7-2.1.6
    * Offline charging
    * Show kernel bootlogo if bootanimation is disabled
    * Removed modular overclocking since nAa-07 already has overclocked frequencies to choose from
    * Option to toggle flashlight from lockscreen (CM Settings -> Lockscreen -> Widgets)
    * Fixed OpenGL ES 2.0 version reporting
    * MiniCM7 and OrangeHaze theme updates

    ### MiniCM7-2.1.5
    * Based on CM-7.2.0 (RC0)
    * Suport for X8 (shakira)
    * Focus with camera button while video recording (robyn)
    * Disable network lock dialog after pin input (configurable)

    ### MiniCM7-2.1.4
    * Sensors are now built from source (no compat mode). No sensor delays
    * Many CM fixes related to stability, bugs and new features
    * Disabled automatic light sensor screen dimming
    * Automatic brightness now works (select tickbox from display settings and also allow light decrease from CM Display Settings)
    * Liblights fixes

    ### MiniCM7-2.1.3
    * Based on CM-7.1 release (Android 2.3.7)
    * kernel: 2.6.29.6-nAa-05
    * USB tethering
    * New usb drivers
    * Some extra RAM
    * Switched to fake dual touch from andrej456 (seems to be the best choice for the mini)
    * Ant+ support

    ### MiniCM7-2.1.2
    * kernel: 2.6.29.6-nAa-04
    * Compcache support (configurable via CM Settings menu)
    * Audio recording quality improvement
    * Ring lockscreen
    * Cherry-picks: Greek dictionary, MIUI-like Battery Bar, Preference to disable bootanimation for faster boot
    * Updated Polish translations
    * Fixed carrier detection and selection

    ### MiniCM7-2.1.1
    * Reverted Custom carrier label since it broke lockscreen unlocking

    ### MiniCM7-2.1.0
    * kernel: 2.6.29-nAa-02
    * Updated wifi/AP modules
    * Fixed 'notification bar difficult to pull up' issue
    * Fake DT updated to doixahn's 007 (in kernel)
    * Major device re-organizing and clean up. Allign with CM/robyn
    * Custom carrier label in CM Settings -> Interface -> Status bar tweaks
    * Clamp the duration of rotary animations
    * Reposition rotary lockscreen for 'drag down to unlock' to work easier
    * Camera support for googles and other apps (X8)
    * Loop ringtone option via: Settings-> CM Settings -> Sound
    * Fixed CWM recovery detection in About -> Phone

    ### MiniCM7-2.0.7
    * CM Setting (input settings) for back button to end current call
    * Added Smartass governor (thanks to AnDyX), not enabled by default
    * Wpa_supplicant / Wifi from sources
    * Rotary doesn't cover caller's name any more
    * LED flash via notification bar
    * Offline charging for X8

    ### MiniCM7-2.0.6
    * netcfg, libbluedroid from sources
    * Improved bluetooth / FM Radio functionality
    * liblights from sources (notifications should blink now)
    * Replaced Launcher2 with ADWLauncher
    * Fixed /data getting filled up with failed download files
    * MDPI and several other fixes for X8

    ### MiniCM7-2.0.5
    * Fixed ddms screen capture
    * Full camera capabilities (photos / video / AF / Flash) using eclair libcamera (thanks to doixanh)
    * Fixed chargemon script for multiboot
    * Smoother 2D scrolling

    ### MiniCM7-2.0.4
    * Android version 2.3.5 (GRJ90)
    * Removed Launcher pro (you can download latest rev. from market)
    * Optimize apks and strip down size
    * Updated LiveWallpapers
    * Updated CWM recovery to 3.2.0.0-r5 x10mini (multiboot + encryption)

    ### MiniCM7-2.0.3
    * Cyanogenmod 7.1.0-RC1
    * Theme updates for various parts
    * Radio app improvements
    * Fixed Usb debugging notification icon
    * backuptool on installation that backs up and restores google propriatery system files
    (no need to reflash gapps if it was already installed)

    ### MiniCM7-2.0.2
    * ClockworkMod recovery v.3.2.0.0-r3 for x10mini
    * Baseband verification on installation
    * Build number: GRJ22 (almost CM7.1) - several changes from Cyanogen
    * Many theme updates for MiniCM7 theme, new OrangeHaze theme
    * SDcard Cache size changed to 128K to avoid music players hiccups

    ### MiniCM7-2.0.1
    * MiniCM Update notifications via c2dm (CM Settings -> System -> Update notifications)
    * Camcoder high quality mode (VGA: 640x480)
    * Many Theme updates in numerous system places and applications
    * Cyanogenmod now has an option in CM Settings -> Lock screen -> Style options -> Incoming call style
    * Undervolting and Overclocking handled CM Settings menu (by default none is active)
    * Notification led
    * Fixed audio routing in FM Radio app
    * APN settings listing
    * gralloc reverted to stock (better performance)
    * Sensors fixed, working in compat mode
    * Compass fixed
    * Fixed Magic smoke wallpaper
    * Permission Management for apps by Cyanogenmod
    * Launcher Pro 0.8.6

    ### MiniCM7-2.0.0
    * Cyanogen7.0.3 - Android 2.3.4 code baseline
    * Built for LDPI
    * MiniCM7 theme
    * GSM/SMS/Data(3G, EDGE)
    * Wifi
    * FM Radio
    * Fixed reboots bug
    * Stock audio Recording
    * Flash led (Torch app)
    * ADB at boot
    * Sensors (except proximity and light)
    * OpenGL/3D
    * Audio Jack
    * Video decoder
    * Video playback support for 3rd party apps
    * Vibration
    * GPS
    * Bluetooth
    * App2sd (storing to ext*. Detect ext3/4 partitions and mount as such)
    * Native App2sd
    * xRecovery preinstalled
    * Usb mass storage
    * Audio Mixer
    * Camera (VGA)
    * Stock SE keyboard
    * Offline charging
    * Reboot menu - boot into xRecovery
    * tun module (vpnc)
    * Fake DT support (Thanks to: doixanh, andrej456)
    * Overclocking (Thanks to: doixanh)
    * Mddi lag fix (Thanks to: doixanh)
    * CM Settings performance menu for setting the Sdcard read cache size (speed improvements for sdcard)
    * CM Settings performance menu for CPU Overclocking
    * CM Settings display menu for Ultra brightness
    View
    36
    F
    farazcrx27
    Notification bar bug on landscape mod fix

    YOU HAVE TO DO THIS MANUALLY

    first extract the zip and then
    just put these 3 files in /system/lib and set the permission 644 (if you dont know what is 644 see any other .so file permission in the same folder and set the same)
    now you are all set just reboot the device
    View
    36
    nobodyAtall
    nobodyAtall
    Hi MiniCM7 fans!

    As promised, MiniCM7-2.2.1 is ready with all the latest code from CM.
    Update notifications are on their way.

    Enjoy!
    View

New posts