[GUIDE] DXKP9 Asian Gingerbread Update

Search This thread

crazbanditz

Senior Member
Aug 18, 2011
1,096
479
Singapore
WARNING: Please read thorugh the whole post!!


Guide:

1. Flash DXKF1 (download & extract files first) using ODIN:
- Open ODIN check Re-Partition, Auto Reboot, F.Reset Time
- Click PIT button choose: latona_20110114.pit
- Shutdown phone
- Simultaneously click and hold Vol.Down+Home+Power buttons (Download Mode)
- Connect phone to PC via Data Cable. (make sure ID:COM box in Odin highlighted yellow)
- Click ODIN's Start button
- Wait for "PASS!" to appear on top left corner of ODIN
- After PASS! click reset button (Re-Partition should be unchecked)
- Click PDA button and choose: I9003DXKF1-REV08-ALL-low-CL1020446.tar.md5
- Click PHONE button and choose: MODEM_I9003DXKB2_REV_00_CL863799.tar.md5
- Click CSC button and choose: GT-I9003-CSC-MULTI-OLBKB2.tar.md5
- Click Start and wait for "PASS!"


2. After reboot do not setup just shutdown and enter Download Mode.


3. Flash DXKP9 as PDA through ODIN:
- Open ODIN
- Click PDA button and choose: I9003DXKP9_I9003OLBKP7_I9003DXKP7_HOME.tar.md5
- Conect phone to PC via Data Cable (make sure ID:COM box in Odin highlighted yellow)
- Click Start button and wait for "PASS!"
4. After reboot, shutdown
5. Simultaneously click and hold Vol.Up+Home+Power buttons to enter Recovery Mode
6. Using volume buttons choose "wipe cache partition" and pres Home button
7. Choose "wipe data/factory reset" and press Home button
8. Choose "reboot system now" and press Home button to Reboot the phone
9. Complete phone setup dialogue, and test everything: Wifi,2G,3G,Mail Notification,GPS.
10. DONE!!

Download:

http://hotfile.com/dl/134002692/7f75...7_XME.zip.html

Mirrors :

http://www.mediafire.com/?35hz2fkzaiklll3(Recommended)(180MB)(No Password)

http://www.multiupload.com/1PQLH31F3L

Download Size : 200.5 MB

Password : samfirmware.com

Feedback Thread

Credits: lohengrin04(He posted this guide, I just made minor changes.)

The purpose of this thread was to help those who needed help flashing DXKP9. ;)

This guide should work with no problems :)

Some of you which after flashing the PIT file your phone wont respond(Means when turn on only vibration then black screen), just remove annd re-insert your battery a couple of times and it will work out fine :)

ENJOY!!;););););)
 
Last edited:

cix18

Senior Member
Aug 20, 2011
145
12
can anyone pls pls pls post resumable link for dxkf1 or any dx fw through which i can upgrade to dxkp9????? my net is s#itty and dcs so cant download through hotfile
 

NgocHaiAG

Senior Member
Jul 16, 2011
56
15
An Giang
@Crazbanditz: Your mediafire link is error. Please edit link with
Code:
http://www.mediafire.com/?35hz2fkzaiklll3

can anyone pls pls pls post resumable link for dxkf1 or any dx fw through which i can upgrade to dxkp9????? my net is s#itty and dcs so cant download through hotfile

It is here
Code:
http://www.mediafire.com/?s8rw6qknkssjm82
 
  • Like
Reactions: cix18

sonyu2011

New member
Feb 27, 2011
1
0
I bricked my phone :-(

Hi, I was in KPH - Cranium v3. I follow the above instruction to flash the KF1.

But my phone was bricked right after the below steps. Anyway to 'rescue' it? Turn on / down vol+home+power / up vol+home+power only give a vibration and blank screen.

1. Flash DXKF1 (download & extract files first) using ODIN:
- Open ODIN check Re-Partition, Auto Reboot, F.Reset Time
- Click PIT button choose: latona_20110114.pit
- Shutdown phone
- Simultaneously click and hold Vol.Down+Home+Power buttons (Download Mode)
- Connect phone to PC via Data Cable. (make sure ID:COM box in Odin highlighted yellow)
- Click ODIN's Start button
- Wait for "PASS!" to appear on top left corner of ODIN

---------- Post added at 05:44 PM ---------- Previous post was at 05:29 PM ----------

Nevermind. After taken out battery for several times. I finally flashed to KF1. Thx.
 

crazbanditz

Senior Member
Aug 18, 2011
1,096
479
Singapore
Hi, I was in KPH - Cranium v3. I follow the above instruction to flash the KF1.

But my phone was bricked right after the below steps. Anyway to 'rescue' it? Turn on / down vol+home+power / up vol+home+power only give a vibration and blank screen.

1. Flash DXKF1 (download & extract files first) using ODIN:
- Open ODIN check Re-Partition, Auto Reboot, F.Reset Time
- Click PIT button choose: latona_20110114.pit
- Shutdown phone
- Simultaneously click and hold Vol.Down+Home+Power buttons (Download Mode)
- Connect phone to PC via Data Cable. (make sure ID:COM box in Odin highlighted yellow)
- Click ODIN's Start button
- Wait for "PASS!" to appear on top left corner of ODIN

---------- Post added at 05:44 PM ---------- Previous post was at 05:29 PM ----------

Nevermind. After taken out battery for several times. I finally flashed to KF1. Thx.

Sorry for the late reply. But yeah. Some of our phones, after flashing the PIT file would not respond for awhile. So yea, just remove and reinsert the battery a couple of times. AND TADA!!;)
 

bscraze

Senior Member
Aug 14, 2011
2,468
687
Singapore
If im alrdy on stocj dxkp1 i just start flashing dxkp9 over right? Its fresh out of the box, still charging, havent done anything to it yet :D

Sent from my GT-i5801 using XDA App
 

crazbanditz

Senior Member
Aug 18, 2011
1,096
479
Singapore
Sorry for being inactive for a long time guys, I have been trying to finish my homework. I am only 13. So yea, guys, please post feedback about this method!! :D Thx!
 

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    WARNING: Please read thorugh the whole post!!


    Guide:

    1. Flash DXKF1 (download & extract files first) using ODIN:
    - Open ODIN check Re-Partition, Auto Reboot, F.Reset Time
    - Click PIT button choose: latona_20110114.pit
    - Shutdown phone
    - Simultaneously click and hold Vol.Down+Home+Power buttons (Download Mode)
    - Connect phone to PC via Data Cable. (make sure ID:COM box in Odin highlighted yellow)
    - Click ODIN's Start button
    - Wait for "PASS!" to appear on top left corner of ODIN
    - After PASS! click reset button (Re-Partition should be unchecked)
    - Click PDA button and choose: I9003DXKF1-REV08-ALL-low-CL1020446.tar.md5
    - Click PHONE button and choose: MODEM_I9003DXKB2_REV_00_CL863799.tar.md5
    - Click CSC button and choose: GT-I9003-CSC-MULTI-OLBKB2.tar.md5
    - Click Start and wait for "PASS!"


    2. After reboot do not setup just shutdown and enter Download Mode.


    3. Flash DXKP9 as PDA through ODIN:
    - Open ODIN
    - Click PDA button and choose: I9003DXKP9_I9003OLBKP7_I9003DXKP7_HOME.tar.md5
    - Conect phone to PC via Data Cable (make sure ID:COM box in Odin highlighted yellow)
    - Click Start button and wait for "PASS!"
    4. After reboot, shutdown
    5. Simultaneously click and hold Vol.Up+Home+Power buttons to enter Recovery Mode
    6. Using volume buttons choose "wipe cache partition" and pres Home button
    7. Choose "wipe data/factory reset" and press Home button
    8. Choose "reboot system now" and press Home button to Reboot the phone
    9. Complete phone setup dialogue, and test everything: Wifi,2G,3G,Mail Notification,GPS.
    10. DONE!!

    Download:

    http://hotfile.com/dl/134002692/7f75...7_XME.zip.html

    Mirrors :

    http://www.mediafire.com/?35hz2fkzaiklll3(Recommended)(180MB)(No Password)

    http://www.multiupload.com/1PQLH31F3L

    Download Size : 200.5 MB

    Password : samfirmware.com

    Feedback Thread

    Credits: lohengrin04(He posted this guide, I just made minor changes.)

    The purpose of this thread was to help those who needed help flashing DXKP9. ;)

    This guide should work with no problems :)

    Some of you which after flashing the PIT file your phone wont respond(Means when turn on only vibration then black screen), just remove annd re-insert your battery a couple of times and it will work out fine :)

    ENJOY!!;););););)
    1
    Thanks will update the download thread with this :)

    Edit : Updated OP of DXKP9 with this thread :)

    Thanks :)

    No problem :)
    1
    @Crazbanditz: Your mediafire link is error. Please edit link with
    Code:
    http://www.mediafire.com/?35hz2fkzaiklll3

    can anyone pls pls pls post resumable link for dxkf1 or any dx fw through which i can upgrade to dxkp9????? my net is s#itty and dcs so cant download through hotfile

    It is here
    Code:
    http://www.mediafire.com/?s8rw6qknkssjm82
    1
    can i flash DXKP9 after flashing XXKPE?

    You can flash.