[Q] AT&T SGS3 l747 Softbricked. HELP.

Ineedhelplol · Jan 13, 2014

PRODUCT NAME: SGH-I474
CUSTOM BINARY DOWNLOAD: YES (41 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 1
BOOTLOADER RP SWREV: 2

Story: I had a stock rom and attempted to root it with: [http://xdaforums.com/showthread.php?t=2092244] & flashed a file via Odin with Auto Reboot checked.
After reboot, I can only get past the SAMSUNG screen then a black screen, I couldn't access recovery, either .. But I can access DOWNLOAD mode.

I have no idea what to do and I usually consult XDA when it's my last resort, help would be appreciated.

audit13 · Jan 13, 2014

What was the last stock rom on your phone? If it was 4.1.1, try this rom: http://xdaforums.com/showthread.php?t=1739426

If you were on stock 4.3, you could try this ROM: http://xdaforums.com/showthread.php?t=2498233

Ineedhelplol · Jan 15, 2014

audit13 said:
What was the last stock rom on your phone? If it was 4.1.1, try this rom: http://xdaforums.com/showthread.php?t=1739426

If you were on stock 4.3, you could try this ROM: http://xdaforums.com/showthread.php?t=2498233

-- Nevermind, It's hard-bricked, I'm going to send it to http://mobiletechvideos.mybigcommerce.com/ so they can fix it.

audit13 · Jan 15, 2014

Would this help? http://xdaforums.com/showthread.php?t=2549068

Ineedhelplol · Jan 15, 2014

audit13 said:
Would this help? http://xdaforums.com/showthread.php?t=2549068

No, but I appreciate it a lot, the problem would that would be the:

" What you need:

- A Micro SD card 16GB or larger. this will no work on smaller cards, i tried a 2GB 4 GB and 8GB for the sake of testing and it fails.

- A working Dump that includes the SBL1, SBL2, SBL3, aboot, TZ and RPM from a working device that matches your DEVICE MODLE ie: I747U or I747M If you wanto t create your own dump from a friends device the command in a rooted adb shell would be as follows but not exact depending where you want the dump file to end up being on your sd cards. "dd if=/dev/block/mmcblk0 of=/storage/sdcard1/debrick.bin bs=1024 count=81920" That is what I used my my co-workers CM 10.2 rom to get the 4.3 bootloader/debrick dump. NOTE: the device has to be rooted with a working busybox that supports the dd command. "

I have absolutely no idea what second part says ._.
.. I think it would just seem simpler if I just send it to http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/ " , excuse my stupidity.

Topics

Topics

[Q] AT&T SGS3 l747 Softbricked. HELP.

Ineedhelplol

Member

audit13

Inactive Recognized Contributor

Ineedhelplol

Member

audit13

Inactive Recognized Contributor

Ineedhelplol

Member

Similar threads

New posts