yes both phones are fully functional.
YES the display appears to be plastic-welded to the bezel! There is no obvious way to separate them. (see pics in main post)
I cannot determine if the glass is fused with display or not.
The screen appears to be welded or glued to the plastic frame. Without removing the screen from the frame it's impossible to know if the glass can be separated from the screen.If the outer glass (digitizer), not the display itself, is broken, do you think a replacement of just the outer glass is possible? Or are you not able to remove just the outer glass? I know you said you weren't sure, but I thought I'd check anyways.
The screen appears to be welded or glued to the plastic frame. Without removing the screen from the frame it's impossible to know if the glass can be separated from the screen.
Have a look at the pictures in the first post, you'll see examples of what I think is holding the screen to the frame. If you recognize the bonding method then you may know how to deal with it.
I don't think there is room for something about as thick as a credit card. The case can flex a bit, but only in the middle, so anything thicker than a credit card would have to be a decent amount smaller than the battery tray (which is 105mm x 58mm) for the flexing to give more room.
No it won't; more details in this post
WHERE can someone buy the MAXX battery case? that is the missing piece for converting non-maxxes.Since the battery case for the xt926 maxx is available, if you have the non-maxx you could purchase the maxx cover, and gain the extra 2mm for the inductive charger.
Since the battery case for the xt926 maxx is available, if you have the non-maxx you could purchase the maxx cover, and gain the extra 2mm for the inductive charger.
No it won't; more details in this post
WHERE can someone buy the MAXX battery case? that is the missing piece for converting non-maxxes.
Maybe... does it include the NFC stuff? Are there other plastic bits missing that need to be 'welded' on? I'd need to see both sides of the piece before being confident it will work for a swap.
Are you interested in frankensteining your RAZR HD to have the MAXX battery? YES, it can be done! You don't even have to remove the battery or speaker.
Once you have remove the PCBs from both phones, the back panels are an identical layout.
View attachment 1795477
The MAXX back is slightly taller
View attachment 1795478View attachment 1795479
^^
Unless you can find a broken Maxx HD, its gonna be extremely difficult to find the back plate and do the conversion. It's much harder than the OG Razr to Razr Maxx. Read the entire thread before you attempt
Yes the pictures + text are all mine. Have the higher-resolution pix but i downsized them all to 640x640 to fit on the forums.
"2460/2530 mAh (min/typ)" ... i take that to mean:Its 2460/2530 mAh. I wonder what does that mean.. does it mean its in between this?