Samsung Galaxy S4 root

Is the S4 a hit?


  • Total voters
    879
  • Poll closed .
Search This thread

l3Lack H@t

Member
Mar 15, 2013
48
89
Hello XDA,

There are 2 root mehods in this thread scroll down to check the second method...

First...
I have found the a root for the new galaxy S4. Kindly follow the instructions in order to root ur galaxy s4.
The root file utilises the system dump of the device. The root method works only on the Samsung Galaxy S4 I9500 running on official Android 4.2.2 XXUAMC6 Jelly Bean but not on the quad-core Snapdragon 600 variant with model number I9505.

Galaxy S4 users who wish to root their handset using the root file may follow my step-by-step guide below.

Let me remind u that I will not be held liable for any mishap, therefore, proceed at your own risk.

Pre-requisites

1) Download and install USB Driver for Samsung Galaxy S4 on the computer.

2) Verify that USB Debugging Mode is enabled which will allow to connect the phone with the computer and use the Android SDK with it. [Press Menu>> Settings>> Applications. From there navigate and click on Development option and ensure the USB Debugging Mode is turned on.]

3) Create a backup of all data of the phone.

4) The battery of the device should have above 80 per cent charge.

5) The root method works only on the Samsung Galaxy S4 I9500 running on Android 4.2.2 XXUAMC6 Jelly Bean; applying this root to incorrect variants will brick the device.

Steps to root Samsung Galaxy S4 I9500 on Android 4.2.2 XXUAMC6 Jelly Bean

1) Download I9500XXUAMC6 pre-rooted firmware for Samsung Galaxy S4 to the computer and extract the zip file

2) Download Odin v1.85 which will help to root the Jelly Bean firmware

3) Turn off the Galaxy S4 and enter Download Mode. Press and hold Volume Down + Home buttons together and then press the Power button until the construction Android robot and a triangle are seen. Press the Power button again to enter Download Mode

4) Run Odin on the computer

5) Connect the phone to the computer using USB cable while it is in Download Mode. If the device is connected successfully, one of the ID: COM boxes will turn yellow with the COM port number. This step might take some time

6) Select the files mentioned below to install on the phone

a) Click on 'PDA' and select file with 'CODE' in its name

b) Click on 'Phone' and select file with 'MODEM' in its name

c) Click on 'CSC' and select file with 'CSC' in its name

d) Click on 'PIT' and select the .pit file

[Note: Ignore the last three steps in case such files are not found.]

7) Ensure the 'Auto Reboot' and 'F Reset Time' options are selected in Odin. Also ensure the 'Re-Partition' option is selected in case the .pit file is being used

8) Double check everything and finally click the 'Start' button in Odin. The installation process will begin and take a few minutes to complete

9) After the installation process is completed, the phone will restart automatically. Once the home screen appears on the device, unplug the USB cable

Samsung Galaxy S4 I9500 is now successfully rooted on Android 4.2.2 XXUAMC6 Jelly Bean firmware. Open the app drawer in the phone and search for an app called Superuser. To ensure that the above root method is installed and working correctly, verify with the Root Checker app from Google Play Store.



If u found this guide useful/helpful kindly hit the thanks button
thank u for ur appreciation and support :good: :)
and please let me know if this method worked for u.. coz if it didnt i might be able to find another way to help u. :)

Black Hat.... :)
 
Last edited:

l3Lack H@t

Member
Mar 15, 2013
48
89
Hello Xda ,


this an other method to root ur s4 devices.

Cofface CWM 6.0.3.2 RECOVERY & ROOT
Update 2013.05.03 by cofface thank you cofface
ROOT newest selinux.

This should be the easiest way to root the i9500 (yes, the so called 8-core one) by now.

Recovery Feature:

1. Based on CWM 6.0.3.2
2. ROOT your phone
Had two methods root in root your phone option,the newest stock must be use new method,and old stock may be use old method is okey.
I had tried some stock firmwares(for example:I9500XXUAMDK、I9500UBUAMDK、I9500XXUAMDK、I95 00ZSUAMDF、I9500XXUAMDE、I9500XXUAMDL、I9500UBUAMDE
、I9500XXUAMDE、I9500XXUAMDE、I9500ZSUAMDF、I9500XXUAM DE、I9500UBUAMDE、I9500UBUAMDE、I9500XXUAMDE、I9500XXU AMDK、I9500ZCUAMDG and so on.)

Thanks:
1、CM Team
2、GSeeker、gsmcn and so on tested.

Just download the recovery and unzip it, flash the cofface_samsungI9500_recovery_en_0503.tar as PDA in Odin.

Then turn off the phone and enter recovery by pressing Vol Up+Home+Power keys, and select ROOT YOUR PHONE(Had two root method), reboot, DONE.

Download:
Hotfile Link
Baidu Link

If your rooting is done,please don't update su bin file.


If you had problem,you can email (cofface@gmail.com)。

Thank u :)
l3Lack H@t :D :good:
 
Last edited:

scott14719

Senior Member
Dec 24, 2011
2,221
832
With the S2 Skyrocket, having "re-partition" checked in Odin assured a brick. In #7 you said to have re-partition checked. I just want to make sure that having it checked was the correct option for the GS4.
 

vijai2011

Retired Recognized Developer
Oct 24, 2011
1,000
498
I don't think this fits in original development.This section us for works done from source/scratch like cm or kernel from source.I consider it more of just a tutorial to flash a rom on Odin than a guide to root.This fits general much IMHO.

Also the rooted rom by as i9000 is a single file rom which should always go into pda.And no repartition unless you have pit file added.(Read your point below the point (d).But still wanted to ensure it ;))

Sent from my GT-N7000 using xda app-developers app
 
Last edited:

Cosmic Blue

Senior Member
Mar 24, 2008
1,156
255
Toronto
With the S2 Skyrocket, having "re-partition" checked in Odin assured a brick. In #7 you said to have re-partition checked. I just want to make sure that having it checked was the correct option for the GS4.


Only if you have a pit file file otherwise leave it unchecked. That what he is saying.
 

Chainfire

Moderator Emeritus / Senior Recognized Developer
Oct 2, 2007
11,452
87,862
www.chainfire.eu
So, has anybody actually tested this ?

We've tested this on the I9505 (literally weeks ago), and simply injecting root does not work - there is further firmware protection against gaining root privileges, it is not just a matter of injected the root files.

So unless you have some damn good evidence this actually does work ... :)
 
Last edited:

The-Kevster

Senior Member
Nov 2, 2007
240
57
London, UK
So, has anybody actually tested this ?

We've tested this on the I9505 (literally weeks ago), and simply injecting root does not work - there is further firmware protection against gaining root privileges, it is not just a matter of injected the root files.

So unless you have some damn good evidence this actually does work ... :)

Firmware protection against root?! Samsung have really changed their feelings towards rooting phone. Seems a strange thing to do seeing as people like yourselves will surely undo their work and bypass it.

Hope they didn't spend too many man hours on it. Or should I say wasted.

Good luck!
 

Odia

Guest
Jan 4, 2009
668
785

Attachments

  • unauth_eng.jpg
    unauth_eng.jpg
    169.9 KB · Views: 3,249

Odia

Guest
Jan 4, 2009
668
785
Okay, but what's the language settings? What the application has been stopped?
And the most important question - did you get Root?

Ignore the language settings, the message was in Chinese and was changed to English so all can read it :D

In this case root enabled adbd was stopped and no did not get root because the phone force stops.
 
  • Like
Reactions: A.S._id

Top Liked Posts

  • There are no posts matching your filters.
  • 59
    Hello XDA,

    There are 2 root mehods in this thread scroll down to check the second method...

    First...
    I have found the a root for the new galaxy S4. Kindly follow the instructions in order to root ur galaxy s4.
    The root file utilises the system dump of the device. The root method works only on the Samsung Galaxy S4 I9500 running on official Android 4.2.2 XXUAMC6 Jelly Bean but not on the quad-core Snapdragon 600 variant with model number I9505.

    Galaxy S4 users who wish to root their handset using the root file may follow my step-by-step guide below.

    Let me remind u that I will not be held liable for any mishap, therefore, proceed at your own risk.

    Pre-requisites

    1) Download and install USB Driver for Samsung Galaxy S4 on the computer.

    2) Verify that USB Debugging Mode is enabled which will allow to connect the phone with the computer and use the Android SDK with it. [Press Menu>> Settings>> Applications. From there navigate and click on Development option and ensure the USB Debugging Mode is turned on.]

    3) Create a backup of all data of the phone.

    4) The battery of the device should have above 80 per cent charge.

    5) The root method works only on the Samsung Galaxy S4 I9500 running on Android 4.2.2 XXUAMC6 Jelly Bean; applying this root to incorrect variants will brick the device.

    Steps to root Samsung Galaxy S4 I9500 on Android 4.2.2 XXUAMC6 Jelly Bean

    1) Download I9500XXUAMC6 pre-rooted firmware for Samsung Galaxy S4 to the computer and extract the zip file

    2) Download Odin v1.85 which will help to root the Jelly Bean firmware

    3) Turn off the Galaxy S4 and enter Download Mode. Press and hold Volume Down + Home buttons together and then press the Power button until the construction Android robot and a triangle are seen. Press the Power button again to enter Download Mode

    4) Run Odin on the computer

    5) Connect the phone to the computer using USB cable while it is in Download Mode. If the device is connected successfully, one of the ID: COM boxes will turn yellow with the COM port number. This step might take some time

    6) Select the files mentioned below to install on the phone

    a) Click on 'PDA' and select file with 'CODE' in its name

    b) Click on 'Phone' and select file with 'MODEM' in its name

    c) Click on 'CSC' and select file with 'CSC' in its name

    d) Click on 'PIT' and select the .pit file

    [Note: Ignore the last three steps in case such files are not found.]

    7) Ensure the 'Auto Reboot' and 'F Reset Time' options are selected in Odin. Also ensure the 'Re-Partition' option is selected in case the .pit file is being used

    8) Double check everything and finally click the 'Start' button in Odin. The installation process will begin and take a few minutes to complete

    9) After the installation process is completed, the phone will restart automatically. Once the home screen appears on the device, unplug the USB cable

    Samsung Galaxy S4 I9500 is now successfully rooted on Android 4.2.2 XXUAMC6 Jelly Bean firmware. Open the app drawer in the phone and search for an app called Superuser. To ensure that the above root method is installed and working correctly, verify with the Root Checker app from Google Play Store.



    If u found this guide useful/helpful kindly hit the thanks button
    thank u for ur appreciation and support :good: :)
    and please let me know if this method worked for u.. coz if it didnt i might be able to find another way to help u. :)

    Black Hat.... :)
    19
    So, has anybody actually tested this ?

    We've tested this on the I9505 (literally weeks ago), and simply injecting root does not work - there is further firmware protection against gaining root privileges, it is not just a matter of injected the root files.

    So unless you have some damn good evidence this actually does work ... :)
    9
    Hello Xda ,


    this an other method to root ur s4 devices.

    Cofface CWM 6.0.3.2 RECOVERY & ROOT
    Update 2013.05.03 by cofface thank you cofface
    ROOT newest selinux.

    This should be the easiest way to root the i9500 (yes, the so called 8-core one) by now.

    Recovery Feature:

    1. Based on CWM 6.0.3.2
    2. ROOT your phone
    Had two methods root in root your phone option,the newest stock must be use new method,and old stock may be use old method is okey.
    I had tried some stock firmwares(for example:I9500XXUAMDK、I9500UBUAMDK、I9500XXUAMDK、I95 00ZSUAMDF、I9500XXUAMDE、I9500XXUAMDL、I9500UBUAMDE
    、I9500XXUAMDE、I9500XXUAMDE、I9500ZSUAMDF、I9500XXUAM DE、I9500UBUAMDE、I9500UBUAMDE、I9500XXUAMDE、I9500XXU AMDK、I9500ZCUAMDG and so on.)

    Thanks:
    1、CM Team
    2、GSeeker、gsmcn and so on tested.

    Just download the recovery and unzip it, flash the cofface_samsungI9500_recovery_en_0503.tar as PDA in Odin.

    Then turn off the phone and enter recovery by pressing Vol Up+Home+Power keys, and select ROOT YOUR PHONE(Had two root method), reboot, DONE.

    Download:
    Hotfile Link
    Baidu Link

    If your rooting is done,please don't update su bin file.


    If you had problem,you can email (cofface@gmail.com)。

    Thank u :)
    l3Lack H@t :D :good:
    8
    Thank you for sharing this with us.

    The root file utilises the system dump of the device
    Can you give us more light about this?
    4
    this is just my personal opinion - time judge us ..

    I know, but why doubt Chainfire?

    Proof of the fact attached :laugh: