[Q] Samsung Galaxy S duos s7562

Search This thread
By:
Advanced…
X

xpacguy

Member
Jan 11, 2008
10
13
Do any one have performance issue with Samsung Galaxy S duos s7562.
I am very much disappointed with my device as it will get stuck on screen. Huge Lag time. Will take time to go to application after clicking on icon. Cannot play HD videos. While receiving calls the screen will go black, You can hear the ring but cannot see anything on screen. Any help will be appreciated. :(
 
  • Like
Reactions: ST23i, Hannah Stern, hariesh and 5 others
Sort by date Sort by votes
K

korek2

Member
May 5, 2013
12
1
Problem wifi

I flashed my phone PMP™ Ultra ROM v6.51 and i have bootloop (like always), next i flashed kernel-xvasek-013-1.17GHz.tar and no bootloop but there is no wifi ? Any solution ?
 
Upvote 0 Downvote
KlinkOnE

KlinkOnE

Senior Member
Oct 13, 2013
743
639
GDR
korek2 said:
I flashed my phone PMP™ Ultra ROM v6.51 and i have bootloop (like always), next i flashed kernel-xvasek-013-1.17GHz.tar and no bootloop but there is no wifi ? Any solution ?
Click to expand...
Click to collapse

You need to replace the wifi module!
I recommend replacing all modules in/system/lib/modules with that from stock rom or pre pmp_u6.5.
You can extract them from 5.5 full rom package for example. You can leave frandom.ko but it wont work with other kernel than BA2X 2.0/1ASDuos.
good luck ;)

Sent from my GT-S7562 using xda app-developers app
 
Upvote 0 Downvote
D

dzigi.bau

Member
Mar 9, 2014
32
1
Guy,

Please help.

Installed some custom ROM, which has problems with networks, wrong baseband probably. I did backup with CWM 5.5.0.4, everything went fine. Now, it cannot make restore, since it tells me

Error while restoring /system!

The 2Gb backup is placed on my exsdcard, found correctly, starts restoring and then it shows above error.

I was reading arround forum for hours and did not find any solution. What can I do to make CWM make restore my previous working stock rom and personal apps and data.

Help.

EDIT:

I read the problem could be wrong CWM Recovery, since I have one which created files ending with ext4.tar.a and what is the correct CMW version for Duos, Siyah, Phils, any others.
 
Last edited:
Upvote 0 Downvote
krazzykid

krazzykid

Senior Member
Apr 22, 2013
178
74
dzigi.bau said:
Guy,

Please help.

Installed some custom ROM, which has problems with networks, wrong baseband probably. I did backup with CWM 5.5.0.4, everything went fine. Now, it cannot make restore, since it tells me

Error while restoring /system!

The 2Gb backup is placed on my exsdcard, found correctly, starts restoring and then it shows above error.

I was reading arround forum for hours and did not find any solution. What can I do to make CWM make restore my previous working stock rom and personal apps and data.

Help.

EDIT:

I read the problem could be wrong CWM Recovery, since I have one which created files ending with ext4.tar.a and what is the correct CMW version for Duos, Siyah, Phils, any others.
Click to expand...
Click to collapse

Download droidizer cwm for s duos and flash through Odin. Then try restoring. If it fails then try Kyle Open ROM CWM recovery.
When all else fails, download correct firmware from sam mobiles and flash through Odin.

Sent from my GT-I9070 using xda app-developers app
 
Upvote 0 Downvote
A

andbehtls

Member
Nov 19, 2011
6
5
toulouse
CyanogenMod

Found this today on Twitter, maybe still a light at the end of the tunnel???

"XT1033-Dual Sim Moto G, Commits need to be merged yet, but calls working on both sims and data on sim1"

:laugh::laugh:
 
Upvote 0 Downvote
KlinkOnE

KlinkOnE

Senior Member
Oct 13, 2013
743
639
GDR
andbehtls said:
Found this today on Twitter, maybe still a light at the end of the tunnel???

"XT1033-Dual Sim Moto G, Commits need to be merged yet, but calls working on both sims and data on sim1"

:laugh::laugh:
Click to expand...
Click to collapse

It is called "msim" implementing dual/multisim capability into cm11. There is not much to find about but obviously it is in an almost working state. From time to time there is something to be read in the nightlies change logs of my p3110 running cm11. So I guess there is some light to be seen. ?

Sent from my GT-P3110 using xda app-developers app
 
Upvote 0 Downvote
You must log in or register to reply here.

Similar threads

Amruth Pillai
[Q] Rooting Samsung Galaxy Star Pro Duos (GT-S7262)
Replies
380
Views
333K
G
glen heldt
V
Samsung Galaxy S Duos S7562 - Move apps to SD Problem
Replies
43
Views
168K
Y
youngWANDERER
S
Galaxy s duos s7562 wifi problem
Replies
13
Views
154K
A
amit.advani1
D-FUSE
Question New Galaxy Avant G386T & G386T1 - We have root and recovery
Replies
3K
Views
582K
billa
billa
C
[Q] How to Root the Samsung Galaxy Prevail?
Replies
81
Views
179K
P
pizzaddict

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 105
    vikassaini01
    vikassaini01
    Here is the full guide. If you like, please press the thanks button, ;)

    CAUTION : It will VOID your Samsung Warranty and set/increase your custom flash counter.
    You will also see a yellow triangle below Samsung logo during each boot.

    Please take a Full NANDROID Backup using CWM once CWM is flashed. This is useful in case you want to return to Samsung Official stock ROM or in case something goes wrong.

    You can flash back to stock recovery if you don't need CWM any further OR if you want to remove the yellow triangle.
    Samsung stock recovery is attached below with this post.

    Requirements :
    1. Samsung Galaxy S duos S7562 Phone
    2. Latest USB Drivers for Samsung Mobiles (http://xdaforums.com/showthread.php?t=961956)
    3. Odin Flashing Tool (http://xdaforums.com/showpost.php?p=32500955&postcount=35)
    4. CWM 5 Recovery (http://xdaforums.com/showpost.php?p=32500955&postcount=35)
    5. Superuser or SuperSU ZIP (attached with this post) (any one of them)

    Procedure :
    1. Install latest USB Drivers for your Samsung Mobile in your PC.
    2. Switch off your mobile.
    3. Press and Hold "Vol. Down + Home + Power" buttons until the phone vibrates.
    Once phone vibrates, leave all buttons.
    4. It will Show you a Warning.
    Press Vol. UP button to Continue.
    5. Now you will see [Odin3] screen on phone which is Download Mode.
    6. Connect your Phone to your PC and wait till it install the drivers.
    7. Download and Extract Odin.zip
    Open Odin. It will detect your phone on some COM Port.
    You will see screen like this :
    1krfn.jpg


    8. Now click on PDA and select the recovery.tar file.
    Now, it will look like this :
    8FbMS.jpg


    9. Now make sure the following :
    Auto-Reboot is checked.
    F. Reset Time is checked.
    All others are unchecked.
    Click on start.
    Odin will start flashing.
    wait for atleast 2-3 minutes.
    Odin will automatically reboot your phone and you will see Pass written on Odin.
    Keep the phone connected to your PC.

    10. Let the phone boot properly and then close the odin.
    11. Now, for Rooting, you have two options.
    Superuser or SuperSU. Both works good, you can choose any of them.
    so, Download CWM-Superuser-3.1.3.zip OR CWM-SuperSU-v0.96.zip and copy to your MicroSD card.
    If you don't have MicroSD card, you can copy it to phone's internal SD card memory.

    12. Boot into CWM Recovery Mode by :
    Vol. UP + Vol. Down + Home + Power
    Keep all of these pressed until you see samsung logo and then release.
    Use Vol. Up and Down to navigate and to select, use Home button. To go back, press Power button.
    IMPORTANT : GO to "Back and Restore" and create a FULL NADROID BACKUP by using "backup" option. It will be very useful in case something goes wrong.

    - "install zip from sdcard"
    - choose zip from sdcard (if files are in external microsd)
    OR choose zip from internal sdcard (if file are in phone's internal sd card memory)
    navigate to CWM-Superuser-3.1.3.zip OR CWM-SuperSU-v0.96.zip and select it.

    That's it.
    Go back using power button to CWM Home screen and reboot the phone.
    View
    38
    vikassaini01
    vikassaini01
    andre.silva.92 said:
    Hi again :)

    Someone know what combination of keys we have to do for enter in recovery mode?:)
    Click to expand...
    Click to collapse

    Hi,
    Press The following combination for booting into recovery. (Works fine for me)
    Keep all of them pressed until you see the samsung logo and then release them all.

    Vol. UP + Vol. Down + Home + Power On

    CWM and Odin is attached. Flash this CWM package using odin (make sure you reboot your phone into download mode for using odin)

    I'm NOT responsible for any brick or other mis-happening. I tested it all on my galaxy S duos and it works fine.

    Edit : CWM 6 replaced with CWM 5and reuploaded. CWM 5 works much smoother for me.
    View
    14
    usmslm102
    usmslm102
    [Guide] How to Reset Custom bin Counter In Galaxy S duos (S7562)

    Here is the full guide. If you like, please press the thanks button

    Caution: : I'm not Responsible if You Bricked Your Phone Do it at Your Own Risk.

    Requirements :
    1. Rooted Samsung Galaxy S duos S7562 Phone!
    2. TringleAway App Get it from Here or from the Attachment Box of this Post.
    3. A sensible Brain and Patient..

    Procedure:
    1. Install The TringleAway 2.86 app
    2. open the TringleAway it will ask you to grant root permission Grant it.
    3. Click on Reset Flash Counter As shown Below!
    VJ3IFHN.png


    4. it Will Give pop-Up as shown Below.

    nTpMWjt.png

    5. Click Continue..
    6. Wait...
    7. Go to Download mode And check Your Binary Status its 'No'

    Thanks Chainfire to makes It Possible!
    View
    10
    keliuss
    keliuss
    Link2SD Working!

    Hey folks,

    Finally got Link2SD working properly on my rooted s7562.

    There are many guides out there so I'll just tell you what I did specifically for our phone to get it working.

    I used MiniTool Partition Wizard (on my Windows 7 laptop) to create the second partition on my 32GB micro sdcard. The important part is that it needs to be FAT32, and not Ext3 as most guides will recommend you use. Ext3 was what I tried originally without success. I was getting "read only" errors when trying to link to second partition.

    I haven't tried the Ext2 or Ext4. FAT32 worked so I'm happy.

    The native "Move to SD card" option in Link2SD does not work, (presumably because it's not natively supported on our phone) but the "Create link" option works fine. Which is what we want.

    I have moved (linked) a few apps over and tested they are working and all is good.

    Hope this helps some of you.

    Regards
    Keliuss

    P.S. Please feel free to thank me below. :)
    View
    9
    Mohitash
    Mohitash
    ROM- Stock DDBMJ1 with some of my mods and edits + 200 dpi -Smart Launcher Pro - SD Cards swapped - PMP Engine - build.prop edits - many more tweaks.

    -Lockscreen, homescreen, notification panel and call screens-

    uploadfromtaptalk1404984238712.jpg uploadfromtaptalk1404984270191.jpg

    uploadfromtaptalk1404984303047.jpg uploadfromtaptalk1404984335803.jpg uploadfromtaptalk1404984392680.jpg

    uploadfromtaptalk1404984432378.jpg uploadfromtaptalk1404984469189.jpg uploadfromtaptalk1404984506903.jpg

    Regards
    Mohitash

    Sent from my GT-S7562
    View

New posts