Make sure that you run the cleaner script. That will help a lot. Next, you need to make sure you have your kernel set to Performance in the kernel advanced setting in the Recovery mode. Then set your Scaling governor to Performance in your Rom Manager. Max CPU is set to 1400mhz. Voltage is set to 1400mV. You will need to mess around with the voltage until you find a setting that your phone loves. Also, if the phone starts to get warm, don't get upset when your benchmark goes down.
[KERNEL] Siyah - JELLYBEAN - ICS [v4.3.3] "One kernel to rule them all!"
- Thread starter ktoonsez
- Start date
Make sure that you run the cleaner script. That will help a lot. Next, you need to make sure you have your kernel set to Performance in the kernel advanced setting in the Recovery mode. Then set your Scaling governor to Performance in your Rom Manager. Max CPU is set to 1400mhz. Voltage is set to 1400mV. You will need to mess around with the voltage until you find a setting that your phone loves. Also, if the phone starts to get warm, don't get upset when your benchmark goes down.
Not sure if this has been stated yet but the new shostock2 v2 uses the kernel with mic swap. =]
Sent from my SGH-I777 using XDA
Sent from my SGH-I777 using XDA
Last edited:
Yes, 2 does not come with siyah, but with Drowningchild's CherryPicker Kernel.
Since it's i9100 based, you should usse the mic swap version.
This kernel has so much promise to it. I can't wait to see the next few releases that come out. Looking forward to actually using BLN now that it doesn't hold a wakelock. I'm loving the fact that we can dual boot already.
It is really nice if you like TW, really fast too. Been playing for 45 minutes or so
I thought the last leak was really good. Hard to imagine it might be improved.
Sent from my Galaxy S II (i777)
UCLD3 is running on Siyah-rc2 no problem. Have fun guys
Agreed. This combination is my favorite.
I did have a issue yesterday with sudden battery draining, but I think that had to do with my Setcpu settings.
Sent from my SAMSUNG-SGH-I777 using xda premium
Attachments
um alright but that still doesn't fix my data usage issue
Sent from my SGH-I777 using xda premium
Slow speeds? Try a different modem. Check apn settings. Toggle airplane mode. You're not being very descriptive which is making me want to bash my face into a brick wall.
Sent from my SGH-I777 using Tapatalk 2
Gave Dual booting a whirl and so far pretty good. Dual booting the latest AOKP as my primary and MIUI as the secondary and so far so good
Slow speeds? Try a different modem. Check apn settings. Toggle airplane mode. You're not being very descriptive which is making me want to bash my face into a brick wall.
Sent from my SGH-I777 using Tapatalk 2
After reading your previous posts do a full wipe. If that doesn't work go get a new iPhone and send me your sgs2
Sent from my SGH-I777 using Tapatalk 2
went from 3000 to 6200 from checking performance and ocing alone. I'm going to leave undervolting alone as it seems to be causing a lot of problems.
Last edited:
Before asking a Q like this, always a good tip to look in the OP of the thread first.... you would have seen this then:
If you are having issues with random reboots, you might need to run a kernel cleaner CWM script to clean things up. Here is a link to the main page for Jivy's script:
http://xdaforums.com/showthread.php?t=1428530
Should get you to what you seek....
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
340The wait is over, Siyah v4 for the I777 is finally here!
Full credit of course goes to Gokhanmoral. Go thank him for creating this great fully customizable kernel RIGHT NOW!!!
This kernel is built from Gokhanmoral's Sources
with some tweeks to make everything run smoothly on our I777's
Click "Thanks" if you like what you see or donate with my link.
Install Instructions
1. Wipe cache
2. Wipe dalvik
3. If you are already on a previous version of Siyah, "Reset ExTweaks profiles" (its under "Kernel specific options")
4. Flash the kernel
5. Reboot and enjoy
It wont hurt your phone at all if you go with the wrong one and only takes a minute to flash the other.
Change Log and Dual-boot ROM instructions in Post #2. READ THE ENTIRE POST #2 BEFORE DOING ANYTHING WITH THE DUAL-BOOT!!!
KEY FEATURES
ROMS VERIFIED WORKING
Here is a link to my sources for those that couldn't find it :good:
https://github.com/ktoonsez/siyahkernel3
DON'T FLASH ANY FILES FROM THE LINK BELOW, JUST FOR CHANGELOG INFO AND CREDIT!!!584.1beta5 Change Log
■Fix permissions issue causing crashing on bott with certain Sammy ROM's
4.1beta4 Change Log
■Linux 3.0.40
■CWM-Based Touch Recovery v6.0.1.1
■fixed led timeout not being saved
■new GPU frequency steps: 54, 108, 133, 160, 266, 330, 400, 440, 520MHz (Removed in beta4)
■added one more GPU step, we now have 4 GPU steps with 108, 160, 266, 330MHz defaults. (Removed in beta4)
■added ntt docomo gps support again (ntt-docomo users can use their previous scripts to get gps working)
■fixed movfilter not being changed with kmemhelper (should fix touch sensitivity problems)
■removed 25MHz and 50MHz CPU steps
■fixed led activity on brightness change
■ExTweaks settings will be reset because of GPU changes. if you revert back to a previous version make sure you reset ExTweaks settings manually.
■update beta1 -> beta4: fixed gamma shift not working in ExTweaks. removed all gpu modifications to make sure we have no problems with other parts. some users (including me) experienced no problems with new gpu steps whereas some users had kernel panics when the screen is off. Consider v4.1beta4 as 4.0.2 with linux 3.0.40 and cwm-based recovery 6.0.1.1.
3.5 Change Log
■bluetooth: support for 4.0.4 stock ROMs
■Whole butt load of merges from Tungstwenty
3.4.4 Change Log
■pegasusq fixes and tweaks
■added cfs tweaks settings to ExTweaks (samsung default, linux kernel default and thunderbolt script defaults)
■added Tungstwenty’s implementation that let’s us see deleted wakelock details (optional in ExTweaks)
■cherry-picked some wifi changes/fixes from cm9 repo
■added mdnie negative effect toggle to ExTweaks (by Tungstwenty)
■and some other tiny changes…
■Linux 3.0.36
■removed some potentially unsafe changes which might be the reason of some users having problems with the latest release.
■added ntt device gps support back. removed exfat related mess. added Entropy512′s patch to prevent multicast packets for added headphone amplification setting to extweaks (named it soundgasm). fixed data statistics and some other changes in config and sources…
3.4.3 Change Log
■Linux 3.0.36
■Several USB fixes
■NFSv4 issues addressed
■Fix overlapping static i/o mappings
3.4.2 Change Log
■Linux 3.0.35
Dual-Boot instructions and Notes
If you want to have another ROM as secondary ROM, follow these steps:
1.Make a nandroid backup of your existing ROM
2.wipe everything and install the other ROM
3.Boot the ROM and make customizations. Don’t forget to reflash SiyahKernel if the ROM flashes another kernel.
4.Use CWM Touch Recovery to clone your rom as secondary rom.
5.Restore nandroid backup
6.To boot from the secondary ROM, either press the HOME key or the VOLUME DOWN key when prompted.
Some notes about dualbooting:
■If you do not make any cloning you won’t be prompted to boot the second ROM.
■you may need to reflash this kernel after a nandroid restore if your nandroid backup is created with another kernel.
■you won’t be able to use mass storage mode for /sdcard in second rom because we have our data and cache partitions on /sdcard. only external sdcard will be mounted if you are using mass_storage mode. mtp should work fine for sdcard.
■once again, you won’t be able to flash any CWM flashable zip to second ROM.
More good information on dual-boot
http://xdaforums.com/showpost.php?p=24724563&postcount=329628OP Updated:
Download v3.2.7.2 - CWM Flashable
IF YOU CAN'T DOWNLOAD THE FILES, USE "REQUEST DESKTOP SITE" OPTION IN YOUR BROWSER!
IF YOU DON'T KNOW HOW TO "REQUEST DESKTOP SITE" GO AWAY, U HAVE NO BUSINESS FLASHING ANYTHING, LET ALONE A KERNEL!
WITH mic swap (use this one if you are using a ROM directly from the I9100 forum, AOKP or CM9)
http://www.mediafire.com/?4ac2u03hg2gg26x
WITHOUT mic swap (use this one if you are using a ROM from OUR I777 forum like UCPLCx or anything based on these)
http://www.mediafire.com/?lx2x9adlgbja7ih25OP Updated
Change Log 4.3.1
1. Status 7 should be gone
2. wakelock: use single threaded workqueueus
3. Lots of "linux/audit" patches
4. Lots of block pathes/updates
5. A butt-load of PM / Sleep mods
6. wireless driver to 1.28.11.9 from Korean S3 BIG TNX to GM (For JB-MALI user)
7. Merged in Linux 3.0.45 and .46 stuff
8. And Im spent
