[PLACEHOLDER] [01.10.2013] HTC One X firmware collection for different CID/MID

Search This thread

silviu242003

New member
Sep 17, 2008
3
0
If your CID is T-MOB101 then you can receive the update irrespective of your carrier as the OTA is dependent on the CID. You however can't install the update on CWM or if you are not on a complete stock rom. You will need to reflash the stock rom via ruu and then try the update again.

THX a lot, ClydeB1! Done deal!
 

hoangps

Senior Member
May 26, 2011
446
62
Ho Chi Minh

fastboot oem rebootRUU
fastboot flash zip firmware.zip



Terminal commands:

i must be relock or unlock bootloader first?
 
Last edited:

proeprnorf

Senior Member
Jun 30, 2012
198
23
Google Pixel 6
Guys i updated my Hboot to 1.36 and used the same firmware.zip file to update my friends Hboot after flashing the firmware.zip the Hboot version was different from what i have it was 1.12 i re-downloaded the firmware.zip file and flashed it again with the same results, now am on bootloop and my guess its from the Hboot so any ideas ?

Edit
Same cidnum: HTC__J15
 

Thant

Senior Member
Apr 25, 2010
2,413
729
Sofia
Guys i updated my Hboot to 1.36 and used the same firmware.zip file to update my friends Hboot after flashing the firmware.zip the Hboot version was different from what i have it was 1.12 i re-downloaded the firmware.zip file and flashed it again with the same results, now am on bootloop and my guess its from the Hboot so any ideas ?

Edit
Same cidnum: HTC__J15

If you are with HTC_J15 update HBOOT to 1.39 firmware.zip 1.39
 

essi_baba

Senior Member
May 11, 2010
719
740
Worldwide
Re: [11.02.2013] Jelly Bean firmware collection for different Carriers ID (CID)

Something wrong with the one in the first page ? It's suppose to be 1.36, Flashed it on mine it shows 1.39 but everything works so no need to panic flashed it on my friend shows 1.12 ?

will try your file today thanks anyway

yes its wrong typed 1.36 .


so its must be 1.39.

Sent from my HTC One X using Tapatalk 2
 

dergago

Senior Member
Feb 10, 2009
183
8
Xiaomi Poco X3 NFC
To flash you need to run the following commands: (It is advised to take a backup of your data and important files on your sd card)
1. Lock bootloader - fastboot oem lock
2. Boot to RUU mode - fastboot oem rebootRUU
3. Flash firmware - fastboot flash zip firmware.zip (if you get an error then rerun this command)
Note: The firmware will flash the new hboot, as well as a new stock boot.img and stock recovery.img.

To flash a custom rom you then need to do the following:
4. Unlock bootloader - fastboot flash unlocktoken Unlock_code.bin (you can use the same unlock_code file as you used previously, check your emails if you can't find it, or else reapply at htcdev.com)
5. Flash custom recovery - fastboot flash recovery nameofrecoveryfile.img
Note: If the unlock process wiped your sd card you may need to boot to recovery and mount usb storage to copy the rom file across again. If your phone won't boot into recovery then run command - fastboot erase cache and try again.

If you then wish to flash a JB custom rom:
6. Flash new boot.img from rom - fastboot flash boot boot.img
7. For good measure - fastboot erase cache
8. Boot to recovery and flash rom

Hi,

I have a HTC ONE X with
HBOOT: 1.12.0000
RADIO: 2.1204.137D1.21
CID: VODAP102
My Rom is Android Revolution HD 9.7.2 by mike1986
The phone is rooted and unlocken (still S-ON)

How can I upgrade to Android Revolution HD 18.2 by mike1986? Can I use your commands? And this ROM
http://www.androidrevolution.nl/downloader/download.php?file=3.14.161.27.zip
Or do I need a ICE CREAM SANDWICH RUU first?

Sorry for so many questions... I'm not really into this HTC stuff (my girlfriends phone).

Hope someone can help me.

THANKS in advance.
 

MaxFTW

Senior Member
May 16, 2012
2,294
3,918
Łódź
Odp: [11.02.2013] Jelly Bean firmware collection for different Carriers ID (CID)

Hi,

I have a HTC ONE X with
HBOOT: 1.12.0000
RADIO: 2.1204.137D1.21
CID: VODAP102
My Rom is Android Revolution HD 9.7.2 by mike1986
The phone is rooted and unlocken (still S-ON)

How can I upgrade to Android Revolution HD 18.2 by mike1986? Can I use your commands? And this ROM
http://www.androidrevolution.nl/downloader/download.php?file=3.14.161.27.zip
Or do I need a ICE CREAM SANDWICH RUU first?

Sorry for so many questions... I'm not really into this HTC stuff (my girlfriends phone).

Hope someone can help me.

THANKS in advance.

You have to update the hboot to at least 1.31 version, otherwise JB ARHD wont boot

Sent from REMIXed One X
Now my HTC works like it really should :good:
 

Zorachus

Senior Member
Dec 15, 2010
4,009
837
Lombard, IL.
Please help, I am using CID Getter from the Play Store, and when I start it, a huge list pops up right away, hard to tell whats what ? Where in that list would my CID be ? Is there a specific name, or something I should look for ?

I have never once updated my HBoot since I bought the phone last Summer. How do I go about doing this ? Find the correct file, and flash in recovery ? I am looking to run a new CM10.1 4.2.2 base ROM. Thanks.
 

sean.trinidade

Senior Member
Please help, I am using CID Getter from the Play Store, and when I start it, a huge list pops up right away, hard to tell whats what ? Where in that list would my CID be ? Is there a specific name, or something I should look for ?

I have never once updated my HBoot since I bought the phone last Summer. How do I go about doing this ? Find the correct file, and flash in recovery ? I am looking to run a new CM10.1 4.2.2 base ROM. Thanks.

Just use this and it will do it all for you.
 

savin

Member
Sep 27, 2007
31
4
I have a custom rom installed and want to upgrade my hboot.

used CID getter.
nothing at the top, but says in the middle that I have OPTUS001 as my ro.build.cid
what does that mean ?

.
 

Vcek

Senior Member
Aug 27, 2011
1,163
337
Simril
Re: [11.02.2013] Jelly Bean firmware collection for different Carriers ID (CID)

I have a custom rom installed and want to upgrade my hboot.

used CID getter.
nothing at the top, but says in the middle that I have OPTUS001 as my ro.build.cid
what does that mean ?

.

That is your cid "OPTUS001"

Sent from my HTC One X using xda app-developers app
 

Top Liked Posts

  • There are no posts matching your filters.
  • 232


    sep2.png


    This thread is a placeholder for all possible firmwares we can get from official HTC OTA's.
    Your CID number must be exactly the same. If it's written "HTC__001" it means you can't flash it, if your CID is "02__001". The whole text must match!


    Please READ this small F.A.Q. before continuing!
    images




    What is firmware.zip?
    Firmware.zip is a part of each OTA update from HTC. It contains important part of the firmware like radio, bootloader, recovery, kernel etc..

    Why it's important to flash firmware.zip and when should I flash it?
    It is recommended to have flashed latest firmware on your device for best modem performance and system stability. Sometimes it's necessary to have latest bootloader flashed because otherwise your device might not work well with new system update.

    Does firmware.zip contains radio?
    Yes, it does contain radio, and for S-ON devices the only method to update radio is to flash latest firmware.zip

    Why it's important to flash it before flashing custom ROM?
    Because firmware.zip contains boot.img (ramdisk and kernel) that will replace custom boot.img from any custom ROM you have. That's why you have to flash firmware.zip first, because otherwise boot.img will be overwritten with stock one.
    If you already flashed firmware.zip after flashing custom ROM, just flash this particular custom ROM again.

    Does firmware.zip contains recovery?
    Yes, it does contain recovery image, that's why after flashing firmware.zip you will have to flash custom recovery again, to be able to flash custom ROM afterwards.

    Can I flash this firmware.zip on any HTC One?
    Not if your device is S-ON. To be able to flash it on S-ON device, your modelid (example: PN0710000) and cidnum (example: HTC__001) must match the firmware.zip version you are about to flash.

    If my modelid or cidnum doesn't match, can I brick my device if I try to flash firmware.zip anyway?
    As long as your device is S-ON flashing firmware.zip with non matching modelid or cidnum will result in error and nothing will be flashed, so there is no risk of brick.

    Do I need to have locked, unlocked or relocked bootloader to be able to flash firmware.zip?
    Your bootloader needs to be relocked.

    If I can't flash newest firmware.zip because of wrong modeid (MID) or cidnum (CID) does it mean I can't use custom ROM based on the latest HTC update?
    In most cases you should be able to run any custom ROM as long as hboot update is not mandatory.

    What if there is no firmware.zip for my MID/CID?
    Try to find latest OTA update for your original stock ROM and send it to me. I will post firmware.zip here.


    Downloads.png





    How to flash?
    (bootloader needs to be relocked)
    1. Re-lock your bootloader (this will most probably wipe content of your device)
    2. Copy downloaded .zip to fastboot.exe location (e.g. c:/SDK/platform-tools/fastboot.exe)
    3. Re-name .zip file to firmware.zip
    4. Open command prompt
    5. Boot your device in fastboot mode (vol down + power ===> fastboot)
    6. Connect device to the PC
    7. In command prompt cd to fastboot.exe location
    8. Make sure you have correct modeid and cidnum (type: fastboot getvar all)
    9. Type: fastboot oem lock (if your device is not relocked yet)
    10. Type: fastboot oem rebootRUU and wait for device to reboot
    11. Type: fastboot flash zip firmware.zip and wait for process to complete
    12. Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
    13. Type: fastboot flash zip firmware.zip and wait for process to complete
    14. Type: fastboot reboot
    15. Unlock your bootloader and flash custom recovery if you are going to use custom ROM.

    RUUs variants:
    Click here
    10
    Woah, thank you. How exactly do I apply that..? I really just need to upgrade my hboot so I can use JB ROMs.
    To flash you need to run the following commands: (It is advised to take a backup of your data and important files on your sd card)
    1. Lock bootloader - fastboot oem lock
    2. Boot to RUU mode - fastboot oem rebootRUU
    3. Flash firmware - fastboot flash zip firmware.zip (if you get an error then rerun this command)
    Note: The firmware will flash the new hboot, as well as a new stock boot.img and stock recovery.img.

    To flash a custom rom you then need to do the following:
    4. Unlock bootloader - fastboot flash unlocktoken Unlock_code.bin (you can use the same unlock_code file as you used previously, check your emails if you can't find it, or else reapply at htcdev.com)
    5. Flash custom recovery - fastboot flash recovery nameofrecoveryfile.img
    Note: If the unlock process wiped your sd card you may need to boot to recovery and mount usb storage to copy the rom file across again. If your phone won't boot into recovery then run command - fastboot erase cache and try again.

    If you then wish to flash a JB custom rom:
    6. Flash new boot.img from rom - fastboot flash boot boot.img
    7. For good measure - fastboot erase cache
    8. Boot to recovery and flash rom
    8
    Firmware 3.20.401.1
    RIL 5.1204.162A.29
    Wifi fix


    HTC_405

    Hboot: 1.39


    x.xx.401.x - World Wide English (WWE)

    cidnum: HTC__001
    cidnum: HTC__E11
    cidnum: HTC__203
    cidnum: HTC__102
    cidnum: HTC__405
    cidnum: HTC__Y13
    cidnum: HTC__A07
    cidnum: HTC__304
    cidnum: HTC__M27
    cidnum: HTC__032
    cidnum: HTC__016



    Firmware : https://www.dropbox.com/s/75qorw6s5zq9o9d/firmware.zip

    OTA_ENDEAVOR_U_JB_45_S_HTC_Europe_3.20.401.1-3.18.401.1_release_314819jljj0efsej28nkon
    8
    Re: [12.01.2013] Jelly Bean firmware collection for different Carriers ID (CID)

    Sweet, How can I cut firmware.zip from ota? Ill share with you.

    Wysłane z HTC One X ° Tapatalk

    No need to, buddy, thanks :)

    HERE is the firmware.zip

    A big THANK YOU to DREFSAB for providing it :)

    This is for ALL H3G phones! H3G_001, H3G_106 and H3G_G04!
    8
    Optus Australia

    CID: OPTUS001

    3.14.980.27

    Firmware.zip: https://www.dropbox.com/s/1xcjxlcs7dc64os/firmware.zip