1. LG Flash Tool
This is the flashing tool that will let you install:
KDZ Files Available:
Requirements:
DOWNLOAD LINK: LG Flash Package - 50 MB
How To Use:
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Your phone is now flashing. DO NOT TOUCH THE PHONE AT ALL. DO NOT UNPLUG THE PHONE.
Step 8 : Varies
If your phone boots properly, ignore this.
Part 1: Booting into recovery
If your phone does not boot and you are stuck in a boot loop:
Step 9 : Optional
2. Entering APNS
This example is for AT&T "4G" HSPA+ APNs
Getting To The APNs
Setting Up The APNs
APNs SET!
3. Booting into and Navigating Recovery Mode
Booting into Stock Android Recovery
Booting into ClockworkMod Recovery
Using ClockworkMod Recovery
4. Flashing CyanogenMod 10
Step 1. Revert to Complete Stock Gingerbread
Step 2. Root Phone
Step 3. Install ClockworkMod
Step 4. Download CM10 & GAPPSStep 5. Boot Into CWM and Flash CM10+GAPPS
Step 6. Wipe Data & Reboot
You should now be running CM10!
This is the flashing tool that will let you install:
- Any .kdz firmware. Ex. V10C_00.kdz
KDZ Files Available:
- FROYO
- GINGERBREAD
Requirements:
- You'll need to have the LG Thrill / Optimus 3D
- All your data backed up
- All LG Drivers Removed
DOWNLOAD LINK: LG Flash Package - 50 MB
How To Use:
Step 1
- Download the .kdz file you want to flash
- Extract the files with WinRar or 7zip
- Uninstall all LG drivers
- Restart computer
Step 2
- In the "Drivers" folder, install the "LGUnitedMobileDriver_S4981MAN36AP22_ML_WHQL_Ver_3.6.exe" file
- In the "Software" folder, install the "B2CAppSetup.exe" file
- In the "SERVER" folder, launch the "shttp3.exe" file
- An error may or may not pop up. Just click OK
- Check the "I agree with this license, and I accept all items."
- Check the "Update entry in main menu."
- Check the "Add to startup."
- Make the password "admin"
- Click "Install"
- Launch the "Small HTTP server" from the Start Menu
- MINIMIZE the popup. If you close it, the server will quit.
- On the TaskBar, a new icon should appear. Right click the icon and go to "Settings"
- Select the "HTTP" tab and change the "Port" to "9002"
- Click "OK" in the top right corner
Step 3
- Navigate to "C:\shttps" on the hard drive
- Copy the contents of "WWW Folder" into the "C:\shttps\www" directory
- Navigate to "C:\Windows\system32\drivers\etc" on the hard drive
- Copy the "hosts" file in "C:\Windows\system32\drivers\etc" to the "ORIG" folder in the LG Flash Package
- Delete the "hosts" file from "C:\Windows\system32\drivers\etc"
- Copy the "hosts" file from the "MOD" folder in the LG Flash Package to "C:\Windows\system32\drivers\etc"
Step 4
- In the "FLASHING" folder, launch "Windows Enabler.exe"
- A new icon should appear on the TaskBar. Click the icon to turn it to the "ON" position
- In the "FLASHING" folder, install the "msxml.msi" file
Step 5
- Open Device Manager
- Windows XP - Right Click "My Computer", click the "Hardware" tab, and select "Device Manager"
- Windows Vista/7 - In the Start Menu search bar, type "Device Manager" and select it at the top
- Unplug your phone (If it is plugged in)
- Take out the battery
Step 6
- Check Device Manager for the current active "COM Ports"
- Boot into DOWNLOAD MODE
- Plug the phone into the computer without the battery inserted
- Hold [VOL UP + POWER]
- Put the battery in and wait until it vibrates or for 3 seconds
- Check Device Manager for a NEW "COM Port"
- If there is not a new "COM Port", restart Step 5
Step 7
- Launch the "UpTestEX_mod2_marwin.exe" file
- Change the product type located under the LG Electronics logo to "3GQCT"
- Change the PhoneMode to "EMERGENCY"
- Navigate to your .kdz file in the "Select kdz file" box
- Click "Normal web upgrade test" at the bottom
- Click "Upgrade Start" on the pop up screen
- On the "Select Country & Language" box, click "Clear phone Software udpate Registry"
- Change "Country" to "Different Country"
- Change "Language" to your language
- Click OK
Your phone is now flashing. DO NOT TOUCH THE PHONE AT ALL. DO NOT UNPLUG THE PHONE.
Step 8 : Varies
If your phone boots properly, ignore this.
Part 1: Booting into recovery
If your phone does not boot and you are stuck in a boot loop:
- Boot into RECVOERY MODE
- Hold [VOL DOWN + 3D]
- Press the POWER button until the phone vibrates
- Use VOL DOWN to navigate to "wipe data/factory reset"
- Press the "3D" to select it
- Use VOL DOWN to navigate to "Yes"
- Press the "3D" to select it
- Restart the phone
Step 9 : Optional
- Root using one of the three SuperOneClick versions in the LG Flash Package folder
- Install ClockworkMod or Touch ClockworkMod Recovery with Recovery Manager
2. Entering APNS
This example is for AT&T "4G" HSPA+ APNs
Getting To The APNs
- Go to the "Settings" app
- Select "Wireless & networks"
- Select "Mobile networks"
- Select "Access Point Names"
Setting Up The APNs
- Press the Menu button
- Select "New APN"
- Select "Name"
- Change it to "AT&T HSPA+"
- Select "Ok"
- Select "APN"
- Change it to "phone"
- Select "Ok"
- Select "MMSC"
- Change it to "http://mmsc.cingular.com"
- Select "Ok"
- Select "MMS Proxy"
- Change it to "wireless.cingular.com"
- Select "Ok"
- Select "MMS Port"
- Change it to "80"
- Select "Ok"
- Select "MCC"
- Change it to "310"
- Select "Ok"
- Select "MNC"
- Change it to "410"
- Select "Ok"
APNs SET!
3. Booting into and Navigating Recovery Mode
Booting into Stock Android Recovery
- Boot into RECVOERY MODE
- Hold [VOL DOWN + 3D]
- Press the POWER button until the phone vibrates
- VOL + and VOL - is to move up and down
- Press the 3D button to select an option
Booting into ClockworkMod Recovery
- Boot into RECVOERY MODE
- Hold [VOL DOWN + 3D]
- Press the POWER button until the phone vibrates
- Go to Settings
- Go to Privacy
- Choose Factory Reset
It will boot into ClockworkMod.
Using ClockworkMod Recovery
- VOL + and VOL - is to move up and down
- Press the POWER button to select an option
4. Flashing CyanogenMod 10
Step 1. Revert to Complete Stock Gingerbread
- Use the "LG Flash Tool" in this post to do this. [I ADVISE USING V21E]
- Step 8 in the guide HAS to be done. Make sure you wipe data.
- Use "Megatron Root" in the second post to do this.
- Use "Recovery Manager" in the second post to do this.
- DO NOT USE TOUCH CLOCKWORKMOD.
- Use the "Booting into and Navigating Recovery Mode" Guide if you do not know how to navigate ClockworkMod
- [COLOR]DO NOT REBOOT[/COLOR]
- Wipe the data from CWM and reboot.
You should now be running CM10!
Last edited: