**BE VERY CAREFUL WITH THESE TOOLS. IT IS ENTIRELY POSSIBLE TO DO IRREPAIRABLE DAMAGE.**
Ripped from the Xperia ROM, these programs allow control over a number of settings in the device.
RegisterEditor should allow direct reading and writing of registers on the qualcomm msm72xx chipset, which will allow control over virtually every setting available, just need to determine addresses and potential values, etc
TBattery talks directly to the battery chipset, and returns values such as mAh capacity, battery temperature, current draw, percentage remaining, etc.
DbgTerm allows real time display of Debug Log on device.
DebugTool allows among other things redirecting of KITL output to USB. You can also configure the level of logging for the Debug Log and have it save the log to SD.
Save Kernel KITL Log to SD:
1.) Open DebugTool.exe, input value 43D in [5]DebugFlags, click menu -> write
2.) Shut Down with Power Button (long press), and start up
3.) Do actions you want to be logged (load program that fails, drivers, etc.)
4.) Plug phone into usb, connect w/activesync and copy off /Storage Card/HtcLog/*.txt
5.) Open DebugTool.exe, input value 0 in [5]DebugFlags, click menu -> write
FMTuner allows direct advanced control over the FM Radio chipset, among other things allows activation without headphones (although I don't see a way to route audio to the speaker)
Uni-AT allows issuing of AT commands to the ROM.
dump a raphael ROM and open up rilphone.dll in a hex editor, look for the strings like +CRING, @AGPSADDRESS, $HSUPA_STATUS, these are AT Commands that can be issued to the radio ROM, to query status and alter settings.
Query an existing setting like so:
AT+CRING?
AT$HSUPA_STATUS?
AT@AGPSADDRESS?
Querying a command should give you some input as to the required format.
Change a setting like so:
AT+CRING=1
AT$HSUPA_STATUS=1
AT@AGPSADDRESS=1
For a setting with multiple parameters, such as AT+HTCNV, set it like so: AT+HTCNV=param1,param2,param3
Useful AT Commands:
AT+RADIOVER : returns radio rom version
AT+HTCNV : returns +HTCNV: 1,10,8 - param1 = DTM support, 1/0, param2 = MCS support 8/10/12, param3 = HSDPA Category 6/8/12
AT+HTCENS : ENS support 1/0
Ripped from the Xperia ROM, these programs allow control over a number of settings in the device.
RegisterEditor should allow direct reading and writing of registers on the qualcomm msm72xx chipset, which will allow control over virtually every setting available, just need to determine addresses and potential values, etc
TBattery talks directly to the battery chipset, and returns values such as mAh capacity, battery temperature, current draw, percentage remaining, etc.
DbgTerm allows real time display of Debug Log on device.
DebugTool allows among other things redirecting of KITL output to USB. You can also configure the level of logging for the Debug Log and have it save the log to SD.
Save Kernel KITL Log to SD:
1.) Open DebugTool.exe, input value 43D in [5]DebugFlags, click menu -> write
2.) Shut Down with Power Button (long press), and start up
3.) Do actions you want to be logged (load program that fails, drivers, etc.)
4.) Plug phone into usb, connect w/activesync and copy off /Storage Card/HtcLog/*.txt
5.) Open DebugTool.exe, input value 0 in [5]DebugFlags, click menu -> write
FMTuner allows direct advanced control over the FM Radio chipset, among other things allows activation without headphones (although I don't see a way to route audio to the speaker)
Uni-AT allows issuing of AT commands to the ROM.
dump a raphael ROM and open up rilphone.dll in a hex editor, look for the strings like +CRING, @AGPSADDRESS, $HSUPA_STATUS, these are AT Commands that can be issued to the radio ROM, to query status and alter settings.
Query an existing setting like so:
AT+CRING?
AT$HSUPA_STATUS?
AT@AGPSADDRESS?
Querying a command should give you some input as to the required format.
Change a setting like so:
AT+CRING=1
AT$HSUPA_STATUS=1
AT@AGPSADDRESS=1
For a setting with multiple parameters, such as AT+HTCNV, set it like so: AT+HTCNV=param1,param2,param3
Useful AT Commands:
AT+RADIOVER : returns radio rom version
AT+HTCNV : returns +HTCNV: 1,10,8 - param1 = DTM support, 1/0, param2 = MCS support 8/10/12, param3 = HSDPA Category 6/8/12
AT+HTCENS : ENS support 1/0
Attachments
Last edited: