[KERNEL/RECOVERY][ICS] Rogue Stock FB27 (Updated 3/5/12)

waxrock · Feb 22, 2012

If this removes the bootanimations and makes it all black, how do I know if I'm getting into a bootloop or if it's actually booting?

All I'm getting is vibrations every now and then.

bravo1565 · Feb 22, 2012

waxrock said:
If this removes the bootanimations and makes it all black, how do I know if I'm getting into a bootloop or if it's actually booting?

All I'm getting is vibrations every now and then.

I had same issue I what ended up doing was flash rom fb17 ,flash modem then let it power on the I went rom manager flash recovery (flash sgs2) once you do that go into recovery from rom manager then flash kernal/recovery that worked for me

Sent from my SPH-D710 using xda premium

spitefulrain · Feb 22, 2012

Anyone else having kinda funky wifi? Sometimes the icon disappears and needs to be toggled to show up again, and also sometimes the wifi and signal icon stay grey.

Great otherwise, no LOS

Sent from my SPH-D710 using xda premium

DataHawg · Feb 22, 2012

Dchibro said:
Just an FYI you can use sfhub's automated root tool to install this kernel. It's really easy and does not trigger the yellow triangle. I originally used it to flash Steady's FB15 repack, and just used it again to flash FB17. No issues whatsoever. Although FB17 isn't in the tool yet, so you have to pull out the FB17 zimage file and drop it in the right folder.

I saw this on sfhub's thread and it sounds like a good way to do it. How do you pull the zimage file from Steady's kernel?

jamesey · Feb 22, 2012

spitefulrain said:
Anyone else having kinda funky wifi? Sometimes the icon disappears and needs to be toggled to show up again, and also sometimes the wifi and signal icon stay grey.

Great otherwise, no LOS

Sent from my SPH-D710 using xda premium

Same issue here

Sent from my SPH-D710 using Tapatalk

Danial723 · Feb 22, 2012

spitefulrain said:
Anyone else having kinda funky wifi? Sometimes the icon disappears and needs to be toggled to show up again, and also sometimes the wifi and signal icon stay grey.

Great otherwise, no LOS

Sent from my SPH-D710 using xda premium

+1

sent from the near past

larry2513 · Feb 22, 2012

Danial723 said:
+1

sent from the near past

+2

Sent from my SPH-D710 using Tapatalk

mrpickem · Feb 22, 2012

larry2513 said:
+2

Sent from my SPH-D710 using Tapatalk

+3

Otherwise good. Tasker doesn't work though

Vgamer4550 · Feb 22, 2012

mrpickem said:
+3

Otherwise good. Tasker doesn't work though

+4 here as well

krazyflipj · Feb 22, 2012

mrpickem said:
+3

Otherwise good. Tasker doesn't work though

+4. This and led notification lights are the only minor issues after flashing this kernel running cm9

Sent from my Epic Galaxy S2

Dchibro · Feb 22, 2012

DataHawg said:
I saw this on sfhub's thread and it sounds like a good way to do it. How do you pull the zimage file from Steady's kernel?

Just drag or extract the zImage file out of SH's ZIP and drop it into the folder sfhub specified.

nate633 · Feb 22, 2012

bo5ibbs said:
so nobody has tried on a mac?

I used Heimdall to flash the Rogue kernel, and it worked. I don't know if I did it the correct way, but here's what I did and it worked. Note, this was for installing Calkulins ICS ROM too.

Coming from Calkulins 2.8
In CWM, flashed the FB15 modem
Rebooted
In CWM, wiped data, dalvik, and cache 3x each
Flashed ZIP of Calkulins ICS ROM
Rebooted then rebooted again for good measure

For the kernel, I double-click the TAR file, and it "unzips" the zImage file
Using Heimdall, "heimdall flash --kernel zImage"

The first reboot after the kernel install is scary, no boot animation and a bunch of vibration "beeps". I let it sit for about 2 minutes, and it finished booting.

Hope that helps, I finally got my phone working again after starting this last night. This method worked for me.

bo5ibbs · Feb 22, 2012

nate633 said:
I used Heimdall to flash the Rogue kernel, and it worked. I don't know if I did it the correct way, but here's what I did and it worked. Note, this was for installing Calkulins ICS ROM too.

Coming from Calkulins 2.8
In CWM, flashed the FB15 modem
Rebooted
In CWM, wiped data, dalvik, and cache 3x each
Flashed ZIP of Calkulins ICS ROM
Rebooted then rebooted again for good measure

For the kernel, I double-click the TAR file, and it "unzips" the zImage file
Using Heimdall, "heimdall flash --kernel zImage"

The first reboot after the kernel install is scary, no boot animation and a bunch of vibration "beeps". I let it sit for about 2 minutes, and it finished booting.

Hope that helps, I finally got my phone working again after starting this last night. This method worked for me.

I have pulled the zimage but it keeps telling me that the file is not a valid PIT file. Do I need to convert it to a PIT format?

nate633 · Feb 22, 2012

bo5ibbs said:
I have pulled the zimage but it keeps telling me that the file is not a valid PIT file. Do I need to convert it to a PIT format?

I didn't have that error and I didn't have to rename it. Maybe a corrupt download?

wizky911 · Feb 22, 2012

Welcome back yellow triangle

Dchibro · Feb 22, 2012

wizky911 said:
Welcome back yellow triangle

Not if you don't use Odin.

Look back a page or two regarding using sfhub's autoroot tool to flash this kernel. It works, and no increased flash count or triangle.

Still, jigs are cheap anyways.

Danial723 · Feb 22, 2012

Dchibro said:
Not if you don't use Odin.

Look back a page or two regarding using sfhub's autoroot tool to flash this kernel. It works, and no increased flash count or triangle.

Still, jigs are cheap anyways.

Yea but the triangle away app is free....

sent from the near past

nique0201 · Feb 22, 2012

Does anyone know why after flashing this kernel my music in google music no longer plays?? It worked fine before coming off the SD.

ssconceptz · Feb 22, 2012

I believe currently these kernels block SD access for ur phone. Put it on internal. A fix will come.

Sent from my SPH-D710 using XDA App

Steady Hawkin · Feb 22, 2012

External SD should only be broken if your on CM9 Alpha 3.1 or earlier. Sbrissen moved external storage on unreleased builds to /sdcard/external_sd so when he releases his new build it will work on that.

In the mean time if your on any other build go to settings-->storage and make sure your external sd is mounted.

Currently we are also looking into reverting bootanimation support on non-CM9 releases in order to get support back. Still not sure why it breaks it on ICS :/

[KERNEL/RECOVERY][ICS] Rogue *Stock FB27* (Updated 3/5/12)

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Inactive Recognized Developer

Similar threads

Top Liked Posts

[KERNEL/RECOVERY][ICS] Rogue Stock FB27 (Updated 3/5/12)