[KERNEL] R3 - OC 1500mhz/EXT4/CIFS/GPU OC from stock LG kernel (2.6.32.9)

Search This thread
By:
Advanced…
F

fallout0

Senior Member
Nov 27, 2008
143
28
Hi guys!

This kernel is for stock/MCR ROMs only. I've tried to combine all the best bits from existing kernels into this one. This is based on the stock LG kernel.

First of all special thanks to Benee/Cpujuste since a lot the changes are from their kernels.

Features of the kernel:
* OC to 1500 mhz (minimum is 500 mhz but if you don't change it 300 mhz will work)
* GPU/AVP/VDE have been overclocked
* noop I/O scheduler
* Disabled all LG debugging messages
* 64 mb hack
* EXT4/CIFS built into the kernel

Few other misc changes to the kernel config. This is my first kernel so take it easy on me :)

Download:

[Release 1]
http://www.mediafire.com/?9g08udzg0d21fmj

[Release 2]
http://www.mediafire.com/?szkweyakk691wx2

[Release 3]
http://www.mediafire.com/?7z7rcw6x136pcaj
 
Last edited:
  • Like
Reactions: Lo_RaT_PeNaT, somemadcaaant, allandroid and 3 others
F

fallout0

Senior Member
Nov 27, 2008
143
28
Release 3
=======
- Fixed wifi thering
- Updated voltages/speeds a little bit so there aren't any > 100mv jumps as before
- Added multicast support

Release 2
=======
- Reduced AVP/VDE clock speeds
- Changed voltage/cpu tables to:

389 mhz ]
503 mhz ]
655 mhz ] Stock LG voltages/speeds
760 mhz ]
1015 mhz ]
1216 mhz - ] For overclocking
1408 mhz - ] Default voltages are higher
1504 mhz - ]


Release 1
=======
- Initial Release
 
Last edited:
F

fajarep

Senior Member
Jan 16, 2010
457
462
Jakarta
testing, hope you can release source code someday :)

info :
testing with FR18, stuck at LG logo...
 
Last edited:
75markus

75markus

Senior Member
Mar 30, 2010
1,875
1,722
127.0.0.1
applied at FR18b2, booting ok, did some testing now :

1.) very positive (for me at least) : LG Gallery works fine with this RAM hack kernel !(zooming ok without black bar !)

2.) LG videoplayer plays 1080p fine !

3.) videorecording with camera mod works fine @ highest settings

4.) quadrant @ 1000mhz : 3218, quadrant @ 1500mhz : 4761

5.) Linpack @ 1000mhz : 36.418, Linpack @ 1500mhz : 54.793

overall : phone seems very snappy even @ 1000mhz, vibration o.k.,

If it´s stable the next 10hrs, i think i will stay with this one, thx !



--------------------------------------------
bugs i found yet :
bootanimation is interrupted when starting 2.nd or 3.rd time (not a big problem)
O2X reboot is not working (reboot & reboot recovery) , or is it because of new CWM recovery 4.0.0.2. ?
tethering not working (tried wifi)
 
Last edited:
F

fajarep

Senior Member
Jan 16, 2010
457
462
Jakarta
75markus said:
applied at FR18b2, booting ok, did some testing now :

1.) very positive (for me at least) : LG Gallery works fine with this RAM hack kernel !(zooming ok without black bar !)

2.) LG videoplayer plays 1080p fine !

2.) quadrant @ 1000mhz : 3218, quadrant @ 1500mhz : 4761

3.) Linpack @ 1000mhz : 36.418, Linpack @ 1500mhz : 54.793

overall : phone seems very snappy even @ 1000mhz, vibration o.k., couldn´t find any bug yet...

If it´s stable the next 10hrs, i think i will stay with this one, thx !

Click to expand...
Click to collapse

wow, it seems it doesn't work with my FR18b2, may i know what do you set in your FR18b2 kernel? do you use default kernel?
 
K

Kenchitech

Member
Jun 23, 2008
15
0
Hiya... just wonder how do i back up the original kernal in case anything goes wrong??? I do wanna try this out on my stock ROM too...
 
75markus

75markus

Senior Member
Mar 30, 2010
1,875
1,722
127.0.0.1
Kenchitech said:
Hiya... just wonder how do i back up the original kernal in case anything goes wrong??? I do wanna try this out on my stock ROM too...
Click to expand...
Click to collapse

just do a nandroid backup first, when you choose advanced restore, you can only restore kernel if you want, but i would advise you to make full restore if you need to, cause one module (wireless.ko) seems also different ...
 
75markus

75markus

Senior Member
Mar 30, 2010
1,875
1,722
127.0.0.1
just had some freeze when playing aroung with pimpmycpu, selecting different scheduler & undervolting,next reboot ended in bootloop -> reverted to MCK r14 ...

seems to be more stable at the moment ...
 
You must log in or register to reply here.

Similar threads

pengus77
[KERNEL][stable: M1 (2.6.39.4) - exp: Alpha 31 (3.1.10)] Kowalski Kernel
Replies
9K
Views
2M
RepurposedPotential
RepurposedPotential
spica1234
  • Poll
*[31-OCT]*[SuperSonic]*[Kernel] HP Pro SuperSonic SR4R SNAPPY|| FLUID || POWERSAVER:
Replies
7K
Views
991K
Marsou77
Marsou77
Benee
vorkKernel-OC/UV Kernel for CM[20111105]
Replies
3K
Views
458K
Benee
Benee
vadonka
  • Poll
[CM7/MIUI Kernel][AUG21]CM7-ETaNa v2.6.32.59
Replies
6K
Views
1M
oneearleft
oneearleft
Topogigi
[ROM] 20111014- lg o2x gb stock mod by topogigi v. 2.0 - Back in black
Replies
4K
Views
823K
H
hellboyborn

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 6
    F
    fallout0
    Hi guys!

    This kernel is for stock/MCR ROMs only. I've tried to combine all the best bits from existing kernels into this one. This is based on the stock LG kernel.

    First of all special thanks to Benee/Cpujuste since a lot the changes are from their kernels.

    Features of the kernel:
    * OC to 1500 mhz (minimum is 500 mhz but if you don't change it 300 mhz will work)
    * GPU/AVP/VDE have been overclocked
    * noop I/O scheduler
    * Disabled all LG debugging messages
    * 64 mb hack
    * EXT4/CIFS built into the kernel

    Few other misc changes to the kernel config. This is my first kernel so take it easy on me :)

    Download:

    [Release 1]
    http://www.mediafire.com/?9g08udzg0d21fmj

    [Release 2]
    http://www.mediafire.com/?szkweyakk691wx2

    [Release 3]
    http://www.mediafire.com/?7z7rcw6x136pcaj
    View
    1
    F
    fallout0
    Hmm that's odd that it's not booting because I am using mcry18b2 for my testing
    I may update it back to 1400mhz and reduce the gpu clocks to see if that helps
    View
    1
    F
    fallout0
    [vertigo] said:
    Doesn't there seem to be tethering problems with every OC/UV kernel at the minute or is that just me...
    Click to expand...
    Click to collapse

    If tethering fails its just because the kernel isn't compiled with the correct options. Release 3 has wifi tethering working.
    View
    1
    Benee
    Benee
    The overclocking I have added with the bc flag is just for teh lulz. The only really useful thing is the AVP overclock. (GPU OC is for teh lulz too (without a hardware accelerated ui)). So I would suggest using the avp oc and better ram throughput would be useful.

    And you won't see big battery improvements (or just placebo :D) with underclocking some stuff. When I use the max 1,2 Ghz or the 1,5Ghz kernel I can nearly recognize a difference, because the radio is eating our battery like mad (or the screen). Only a fix 1,5Ghz vs fix 800Mhz would result in some differences.
    View
    1
    75markus
    75markus
    GeorgeTF said:
    hello guys.i just want to ask something.
    im using modaco rom 19/5-11 modaco fr17 fear edition 10 with kernel 2.6.32.28-mck-r14-ocun and i want to know if this kernel is ok for my rom.
    i want to install it but im afraid
    thanks
    Click to expand...
    Click to collapse

    yes, works on MCR Rom...

    make backup first for safety ...
    View

New posts