LuPuS Kernel Stock
Hi I have kernels for the PLAY and one for the PRO, ARC/S users where pm'img me to make my one for the PRO compatible
with the ARC/S. Unfortunately they never got back to me about testing, But no worries as besttt said he would test
for me and thanks to his extensive testing it was able to boot and apparently is super smooth well i'll release so you can all test
it out for your selves :good:
Disclaimer
Included in kernel
[/LIST]
Added Io-schedulers --
Added Governors --
What else-----
Show your support for the kernel and my work by putting this in your signature, its only a quick one I done up with my limited time
A big thanks to -
gu5t3r
DooMLoRD
Jimbo77
xeozus
NobodyAtAll
Faux123
Erasmus
Leedroid
FXP Team
Jerpelea
[NUT]
besttt - testing
tempest918 - For the Logo
Sinkster - testing
besttt - testing
Phil3759
CTCaer
For v2 i've started from scratch from Sony's xx.587 sources, I know everything might not be added and some things may need to be fixed
so anything that needs to be fixed or you would like to be added leave a suggestion (not an order) in the thread. Everything mentioned above has been added.
Downloads in post 2
Kernel source --- -branch master
https://github.com/garwedgess/LuPuS-STOCK-ICS-Xperia2011
CWM source -- https://github.com/garwedgess/android_bootable_recovery -b lupus-cwm
Hi I have kernels for the PLAY and one for the PRO, ARC/S users where pm'img me to make my one for the PRO compatible
with the ARC/S. Unfortunately they never got back to me about testing, But no worries as besttt said he would test
for me and thanks to his extensive testing it was able to boot and apparently is super smooth well i'll release so you can all test
it out for your selves :good:
Disclaimer
Code:
[COLOR="DarkOrchid"]#include[/COLOR] [COLOR="Magenta"]std.h[/COLOR]
[COLOR="Blue"]/*
* Your warranty is now void.. LOL I guess you knew it already.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, you getting dumped or you getting fired because your phone*
* bootloops and alarm does not go off. Please do some research if you have any *
* concerns about features included in my kernel before using it! YOU and only*
* YOU are choosing to make these modifications.
*/
[COLOR="Magenta"]#ifdef[/COLOR]
You have a [COLOR="DarkGreen"]question[/COLOR] post it in the [COLOR="DarkRed"]thread[/COLOR],
Instead of [COLOR="DarkGreen"]Pm'ing me[/COLOR], as other users may
experience your [COLOR="DarkRed"]problems[/COLOR]
[COLOR="Magenta"]#endif[/COLOR][/COLOR]
Included in kernel
[/LIST]
Added Io-schedulers --
- - Noop
- Anticipatory
- Deadline
- CFQ
- BFQ
- SIO
- ZEN
Added Governors --
- - lagfree
- brazillianwax
- smoothass
- scary
- savagedzen
- smartass
- smartassv2
- smartassH3
- interactivex
- minmax
- powersave
- performance
- conservative
- ondemand
- interactive
- userspace
+
Lulzactive - Thanks to Tegrak
Based on Interactive and Smartass. When workload is greater than or equal to 60%, the governor scales up
CPU to next higher step. When workload is less than 60%, governor scales down CPU to next lower step.
When screen is off, frequency is locked to global scaling minimum frequency
Virtuous
Virtuous is a modded smartassV2 which gives even more battery time then smartassV2
Intellidemand - Thanks to faux123
This is an intelligent ondemand that enters browsing mode to limit max frequency when GPU is idling,
and (exits browsing mode) behaves like ondemand when GPU is busy; to deliver performance for gaming and such.
Intellidemand does not jump to highest frequency when screen is off.
Lazy - Thanks to Ezekeel
The Idea here is to eliminate any instabilities caused by fast frequency switching by ondemand.
Lazy governor polls more often than ondemand, but changes frequency only after completing min_time_state
on a step overriding sampling interval.
Lazy also has a screenoff_maxfreq parameter which when enabled will cause the governor to always
select the maximum frequency while the screen is off.
-Ondemandx:
Basically an ondemand with suspend/wake profiles. This governor is supposed to be a battery friendly ondemand. When screen is off, max frequency is capped at 500 mhz. Even though ondemand is the default governor in many kernel and is considered safe/stable, the support for ondemand/ondemandX depends on CPU capability to do fast frequency switching which are very low latency frequency transitions. I have read somewhere that the performance of ondemand/ondemandx were significantly varying for different i/o schedulers. This is not true for most of the other governors. I personally feel ondemand/ondemandx goes best with SIO I/O scheduler.
-Lionheart:
Is a conservative-based governor. The tunables (such as the thresholds and sampling rate) were changed so the governor behaves more like the performance one, at the cost of battery as the scaling is very aggressive.
To 'experience' Lionheart using conservative, try these tweaks:
sampling_rate:10000 or 20000 or 50000, whichever you feel is safer. (transition latency of the CPU is something below 10ms/10,000uS hence using 10,000 might not be safe).
up_threshold:60
down_threshold:30
freq_step:5
Lionheart goes well with deadline i/o scheduler. When it comes to smoothness (not considering battery drain), a tuned conservative delivers more as compared to a tuned ondemand.
BadAss Governor:
Badass removes all of this "fast peaking" to the max frequency. Badass will also take the gpu load into consideration. If the gpu is moderately busy it will bypass the above check and clock the cpu with 1024Mhz. If the gpu is crushed under load, badass will lift the restrictions to the cpu.
Superbad -
A "superbad" super smooth rendition of a highly optimized "smartass" governor!
Darkside -
A "slightly more agressive smart" optimized governor!
What else-----
- -SLQB - (SLAB allocator with Queue)-(both)
This memory allocator is designed for small number of CPUs system (such as desktop or smart phone devices). This allocator is design to be simple and it is optimized for using order-0 pages as much as possible (order-0 pages are the simplest therefore quickest type of memory in a Linux system to allocate).
- Added Cleancache
- Supports ext 2,3
- Updated zRam
- Lzo compression/decompression speed has doubled on average.
- Init.d support
- Fudgeswap
- And much more
- O/C and stable upto 2ghz, although I do not recommend O/C to 2ghz for long periods of time, do so at your own risk.
Show your support for the kernel and my work by putting this in your signature, its only a quick one I done up with my limited time
Code:
http://i.imgur.com/xtWNL.png
A big thanks to -
gu5t3r
DooMLoRD
Jimbo77
xeozus
NobodyAtAll
Faux123
Erasmus
Leedroid
FXP Team
Jerpelea
[NUT]
besttt - testing
tempest918 - For the Logo
Sinkster - testing
besttt - testing
Phil3759
CTCaer
For v2 i've started from scratch from Sony's xx.587 sources, I know everything might not be added and some things may need to be fixed
so anything that needs to be fixed or you would like to be added leave a suggestion (not an order) in the thread. Everything mentioned above has been added.
Downloads in post 2
Kernel source --- -branch master
https://github.com/garwedgess/LuPuS-STOCK-ICS-Xperia2011
CWM source -- https://github.com/garwedgess/android_bootable_recovery -b lupus-cwm
Last edited: