[ROM][Pre-Pre-ALPHA] Droid A855 ICS Build Attempt

Search This thread

cowsquad

Senior Member
Aug 31, 2009
1,383
323
Portland, Oregon
OnePlus 9 Pro
I tried a few times today...hung up on TIBU more than once, and on more than one fresh install so I didn't get into the apps very far. I was deleting bootani and ringtones, then rebooting and installing gapps.

How are you guys holding onto data? Are you running the radio commands every boot?

I know it's gonna get there...sure appreciate everyone chiming in. It's a fine line to not sound like complaining, but these things have to be made known.

I'm holding to data every time. I don't know what I did. When I first install this rom today, every time I reboot my phone it lost signal, so I had to input those commands. Then later on the day, I created a backup of this rom with Rom Manager, then I restored that same backup. After that my phone has not lost signal on every reboot. (I rebooted 6 times already)
sent from my Droid ICS using tapatalk
Edited: I just reboot my phone again and I keep holding on my signal.
 
Last edited:

metalspring

Senior Member
Nov 5, 2011
2,466
4,327
I tried a few times today...hung up on TIBU more than once, and on more than one fresh install so I didn't get into the apps very far. I was deleting bootani and ringtones, then rebooting and installing gapps.

How are you guys holding onto data? Are you running the radio commands every boot?

I know it's gonna get there...sure appreciate everyone chiming in. It's a fine line to not sound like complaining, but these things have to be made known.

it works much better overclocked even a little, gingerbread kernels do work on this...and keeping signal is just a fluke...all i did was reboot once, use the radiooptions 1, 5 and 0 but it didnt do anything so i tried putting it into airplane mode but it wouldnt go away so i rebooted and the signal hasnt gone out
 

cowsquad

Senior Member
Aug 31, 2009
1,383
323
Portland, Oregon
OnePlus 9 Pro
it works much better overclocked even a little, gingerbread kernels do work on this...and keeping signal is just a fluke...all i did was reboot once, use the radiooptions 1, 5 and 0 but it didnt do anything so i tried putting it into airplane mode but it wouldnt go away so i rebooted and the signal hasnt gone out

Lol isn't radio options 5,1,0 :)

sent from my Droid ICS using tapatalk
 

fakieskr8333

Senior Member
Dec 22, 2010
200
56
any way to tell what build im on, downloaded the update but i have two files with the same name and im not sure which is which lol.
 

fakieskr8333

Senior Member
Dec 22, 2010
200
56
man i cant get into recovery. wonder what i screwed up. im not familiar with the og (just the x). how can i get into recovery. ive tried through the power menu. rom manager, and holding x at startup.

EDIT: nvm, i got it. flashing latest build. wish me luck
 
Last edited:

sefuheron

Member
Dec 30, 2009
5
0
man i cant get into recovery. wonder what i screwed up. im not familiar with the og (just the x). how can i get into recovery. ive tried through the power menu. rom manager, and holding x at startup.

That should be it... hit the power button and hold x at the same time... and just continue to hold x down until you are in recovery.

If that doesn't work, I would boot to the bootloader and reflash a stock rom, and start over. Try this... Just my $0.02 though.
Code:
www . droidforums . net/forum/bugless/177077-if-you-have-fc-lag-sounds-etc-think-your-og-droid-hw-failing-read.html

Edit: Saw you got it, good luck.
 
Last edited:

Ozzie12

Senior Member
Oct 2, 2010
298
97
Only on a reboot...if you really did it we'd be hearing a whole lot more about it...
Where's that no-no smiley when you need one...lol

It is running snappy fast though. I've been playing with tibu and it isn't bogging down in the least. I have Pete's 1100 running.
 

cowsquad

Senior Member
Aug 31, 2009
1,383
323
Portland, Oregon
OnePlus 9 Pro
Only on a reboot...if you really did it we'd be hearing a whole lot more about it...
Where's that no-no smiley when you need one...lol

It is running snappy fast though. I've been playing with tibu and it isn't bogging down in the least. I have Pete's 1100 running.

Did you made a backup of the rom with rom manager? I remember doing that, then restoring that back up via rom manager.

sent from my Droid ICS using tapatalk
 

Ozzie12

Senior Member
Oct 2, 2010
298
97
I haven't restored it yet...ok...I'll byte yet again...

Oh...and I mistyped when I said tibu was working...not yet, but I'll try again.
 

ASAM123

Senior Member
Dec 20, 2011
193
18
battery stats work, dsp manager included, long press back to kill app added, and general speed improvements...its FAST now lol, i even loaded up all the same apps i use on gingerbread and its still smooooooooooooooooth lol

Thanks! I tested out the first two alphas, but haven't had time to test out rest. I guess I'll wait till phone calls work. lol.
 

metalspring

Senior Member
Nov 5, 2011
2,466
4,327
Odd, I decided to try a full reinstall and accidentally rebooted without doing anything other than removing a couple system apps I don't use and my data came right back no problem and has stayed back??? Maybe cowsquads and my phone are just awesome like that lol

Although one thing I noticed is somehow I broke init.d scripts running automatically at boot after the first reboot? Script manager to the rescue I guess...

Oh did anyone notice location works now? (Location using mobile network anyway)
 

cowsquad

Senior Member
Aug 31, 2009
1,383
323
Portland, Oregon
OnePlus 9 Pro
Odd, I decided to try a full reinstall and accidentally rebooted without doing anything other than removing a couple system apps I don't use and my data came right back no problem and has stayed back??? Maybe cowsquads and my phone are just awesome like that lol

Although one thing I noticed is somehow I broke init.d scripts running automatically at boot after the first reboot? Script manager to the rescue I guess...

Oh did anyone notice location works now? (Location using mobile network anyway)

That's weird hahah but now I can't seem to boot into cwm recovery anymore :( I have tried using rom manager, power button + x, and no luck :(

sent from my Droid ICS using tapatalk
 

metalspring

Senior Member
Nov 5, 2011
2,466
4,327
That's weird hahah but now I can't seem to boot into cwm recovery anymore :( I have tried using rom manager, power button + x, and no luck :(

sent from my Droid ICS using tapatalk

Try reflashing it? If you need to try an sbf go to peter Alphonsos website look under downloads> sholes and he has an rzrecovery sbf, a clockwork sbf and an sprecovery sbf or the standard stock ota sbfs too
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 74
    new build: http://www.mediafire.com/file/guo6leourklgzgq/cm-9-20120703-UNOFFICIAL-sholes.zip
    gapps: http://www.mediafire.com/?ax46kp0yrl85ynn
    ___________
    Don't flash any other kernels. they won't work.

    changes:
    hexed defy camera libs
    HD profile 854x480 green lines in gallery, plays fine on pc
    SD profile 640x480, plays fine via gallery
    * camera saving null jpegs fixed
    * camcorder working
    * enabled TLS register user in kernel and userspace
    * enabled 1% battery charge display
    * lid switch reporting fixed again (haha)
    * updated wifi drivers and firmware
    * usb storage and adb work
    * probably something i forgot ;)
    compiled kernel with gcc4.5, userland with linaro gcc 4.7 and -O3

    still broken:
    camera flash
    gps (it was working before. RDS_SOCKET permission issue??)
    speakerphone and bluetooth mic routing
    HW decode
    native tethering


    if you like my works, feel free to buy me a beer
    13
    http://www.mediafire.com/file/sndcftxoq9g51gd/cm-9-20120712-UNOFFICIAL-sholes.zip
    http://www.mediafire.com/file/uuhjaczqiqudqll/deprimed_160mhz.zip
    http://www.mediafire.com/file/um9adenv025ip5d/deprimed_180mhz.zip
    http://www.mediafire.com/file/k7agmab0uvuf274/deprimed_200mhz.zip

    build default is core @ 180 (sgx @ 120)

    3 kernels:
    core 160 hi 80 low sgx 107/53 ~ stockish speeds
    core 180 hi 90 low sgx 120/60 ~ moderate performance increase, good batt life
    core 200 hi 90 low sgx 133/60 ~ "battery waster" :D fast! definitely wont work on all phones. it works on my droid built 9/11/2010, but the other one built 7/19/2011 doesn't.

    other changes:
    touchscreen? idr if that was in 7/3 build
    camera stuff
    sw dec
    added a few missing bluetooth files
    not really much else
    9
    overclock breaks camera, backported milestone mt9p012, hp3a, and isp drivers
    this fixed camera and camcorder with sgx overclock, and i'm getting higher fps while recording
    was 15 , now 20 to 24.
    isp now uses an additional 6mb of ram, but i think it's a good tradeoff.
    true 720p recording may be possible now ;)

    Edit: still freezes... hmm.

    Edit:
    odexed build is still unstable, it locks up occasionally when the phone goes to sleep, and usually doesn't come back.
    no errors in logs, nothing i can check looks out of the ordinary, happens with and without gapps, completely mystifying.
    9
    today i ws able to hack in the defy qtouch-obp-ts drivers and enable 5 point multitouch
    the new drivers came with new firmware. previously ver 19, new ver 22.
    this actually got flashed to the touchscreen controller, it's a one way process, unless someone can dump v19 from their phone.. but
    the new ver is compatible with old kernels too, so i don't think it's a big deal.
    i also modified the way the driver reports touch events based on moto stingray qtouch driver
    this is compatible with ics and jb without hacks.

    ics progress: testing an odexed build. it's 20mb larger, but uses 20mb less ram and it's fast! now half of system/app lives on /data
    jb: boots. touchscreen is ... weird. no radio audio sensors lights anything really.
    9
    figured it out:) well maybe i don't quite understand it, but it works :D
    problem was in sram34x.S
    apparently newer kernels don't modify sdram AC timings because sram code can't guarantee no one is using sram when the clock change occurs, which causes random crashes, or in our case, no boot.
    i've also rebased my kernel on deprimed and so far all is good.
    still need to test battery life, it's probaly worse, but better than previously posted builds
    screen off: ram @ 80Mhz sgx at 53Mhz
    screen on: ram @ 200Mhz sgx @ 133Mhz
    Edit2 warning was caused by dsp opp2 not being able to be set
    dropped dsp opp2 to 160.