The Main Developer of these roms is Tigrouzen
Thanks To
Rebellos,Tigrouzen,Oleg_k, mijoma, nbates66, anghelyi, Volk204, mikegapinski and many others.
And Thanks to all These Rom's developer
Links
Overall project thread : http://xdaforums.com/showthread.php?t=1459391
Rebellos's CM10 "Jelly Bean" thread : http://xdaforums.com/showthread.php?t=1851818
NAND Version Thread : http://xdaforums.com/showthread.php?goto=newpost&t=2060590
WHAT DOESN’T WORK (BUGS/TODO)
all Modem (GSM/GPRS) functionallity
GPS
Microphone
Magnetometer
Optical sensor
Power and hold key handling has to be polished
Battery Gauge (NOTE: It can destroy your battery calibration due to prolonged usage! You had been warned.)
WHAT DOES (SHOULD) WORK
Sound playback
Screen
Wifi/BT
Accelerometer
Camera
SD Card
Battery now shows 50 %
Overclock now possible to 1200 MHz Max
Available Ram 285~290 MB on NAND
Fixed Moving app to SD
Fixed installable apps problem(Previously Some apps couldn't install)
Changelog 08.01.2013 :
Now no more need Bada partition
Overclock possible to 1400 MHz
Available Ram now 286-303 MB (Seperate 2 Kernel)
Compiled on Devil Kernel
Devil Tweaks included
I can say,Real android phone i'm using
Advanced Setting of Galaxy S
mDNie works
TV OUT Works (on V2)
I/O Scheduler: SIO
Bigmem and Hugemem on Performance setting
Fixed Video problem on V1
Downloads
Tigrouzen Rom Based on Cyanogen Mod 10.1 included Gapps : http://www.multiupload.nl/DL8EVAW1RX
Kernel V1 (08.01.2013) for Android 4.2.1 : http://www.multiupload.nl/ES8HNRY4U1
Without Camera You have 296~303 MB Ram
Kernel V2 (08.01.2013) for Android 4.2.1 :http://www.multiupload.nl/TBM2A8AWNE
Camera works,Video also work(without record) and You have 280MB Ram
Source is available on Github Repo : https://github.com/Tigrouzen & https://github.com/Rebell
Installation for SD Card
Bada 2.0 is required
For Fresh Installation,I suggest you Reflash bada
Attention : Backup your SD Card
If you previously installed this rom,Need Repartition SD,So Backup again
- Download 2 packages: BOOTFILES, armlinux_boot for S8500 :
Releases: http://goo.im/devs/Rebellos/wave - Download zImage (Kernel) from upper.
- Start Bada.
- Copy zImage to the Bada's User partition (the one about 390MB big).
- Flash BOOTFILES and FOTA using Multiloader. http://dl.dropbox.com/u/14962487/Multiloader.png
If you have been already using FOTA and BOOTFILES you don't need to reflash . - Switch off your phone
- Go to CWM using Call End + Volume Up buttons
- Be patient, first bootup will keep unresponsible on Black Screen for up to 3 minutes.
- CWM Recovery starts, pick:
Advanced>SD Partition>select how many space you want as internal memory>SWAP-0M
(F.e : If you have 8GB select 4096, 4GB select 2048, 2GB select 1024 and etc..)
Attention:After SD partitioned then go next step,No need Reboot - Then follow this and connect USB to PC : Mounts and Storage>Mount USB Storage
- Copy your Rom to SD Card and unmount USB Storage
- install zip from sdcard
- choose zip from sdcard
- "blablabla.zip"
- Yes - install - Then reboot holding the Power key
For Delete Now no need to reflash bada,Just repartite your sd card as normal,or let miss that
Last edited: