WARNING: From koush' IRC channel it seems this version may be (permanently?) bricking devices.
At the time of this writing only a single working flash has been reported, and several (full?) bricks.
--Chainfire
I just finished my recovery for Galaxy S. This requires some testing before I do the final release.
Recovery/Boot TAR download (do NOT extract):
http://bit.ly/czDrPC
932e5f7a9f09c9bc33b14a527f642933
Initramfs source: http://github.com/koush/i9000-leshak-initramfs/tree/koush
Installation instructions:
Please join #koush on irc.freenode.net to report bugs. I can't check all 4 XDA threads
At the time of this writing only a single working flash has been reported, and several (full?) bricks.
--Chainfire
I just finished my recovery for Galaxy S. This requires some testing before I do the final release.
Recovery/Boot TAR download (do NOT extract):
http://bit.ly/czDrPC
932e5f7a9f09c9bc33b14a527f642933
Initramfs source: http://github.com/koush/i9000-leshak-initramfs/tree/koush
Installation instructions:
- Install Odin3 v1.0 (MAKE SURE THIS IS THE VERSION YOU USE)
- Start Odin3
- Press PDA
- Select the tar file (do NOT extract)
- Start phone into download mode.
- Press START to flash.
- After 20 seconds or so, phone should automatically reboot.
Please join #koush on irc.freenode.net to report bugs. I can't check all 4 XDA threads
Last edited: