CM 10.2 for Canadian Optimus G (E973/E971)

Search This thread

BloodBaron

Senior Member
Dec 3, 2010
413
88
Winnipeg
Re: CM 10.1 for Canadian Optimus G

Is the power menu, when you click on reboot it only asks if you want to reboot instead of recovery, reboot or bootloader missing?

Sent from my Optimus G using xda premium
 

dpvu

Senior Member
Oct 13, 2010
172
38
Re: CM 10.1 for Canadian Optimus G

Just had my first random reboot on the 0219 new test 1 build. It's hard to debug because I wasn't doing anything, didn't receive a notification or anything to trigger it. I'll try just leaving a logcat program running to capture a reboot but it's really hard to recreate the problem.

Sent from my Optimus G using xda app-developers app
 

dpvu

Senior Member
Oct 13, 2010
172
38
Re: CM 10.1 for Canadian Optimus G

Alright, so just before I drove home tonight I activated logcat extreme to see if I could get a log and when I got home I found that my phone had indeed rebooted at some point during the drive. To be honest, I probably wouldn't have even known if it wasn't for the logcat extreme app no longer running. Hope this helps the effort because it seems so random. Also, my battery was above the 15% that would trigger low battery as well as there were no notifications when I got home.

http://dl.dropbox.com/u/25128048/last_kmsg_0219

http://dl.dropbox.com/u/25128048/Log_2013-02-19_00-52-37.txt

Sent from my Optimus G using xda app-developers app
 

L1qu1d

Senior Member
Jul 19, 2009
348
45
Toronto
I'm still running the inverted volume battery build, but its running really well. I did notice that the battery indicator doesn't update properly.

It said 84% this morning, when I went to battery info it dropped down to 80%. Other than that it only lost about 8% in about 8 hours, so thats pretty good:)
 

birnie

Member
Jun 10, 2009
40
0
Re: CM 10.1 for Canadian Optimus G

Test 5 build starting to reboot a lot. Trying to capture log to post before I flash something new.

Sent from my Optimus G using Tapatalk 2
 

billybest

Senior Member
Dec 13, 2009
90
19
Re: CM 10.1 for Canadian Optimus G

I noticed that the builds seem very stable for hours or a day, then they start become more likely to reboot/freeze.
 

chadouming

Senior Member
Aug 27, 2009
2,208
1,982
On the interwebz

L1qu1d

Senior Member
Jul 19, 2009
348
45
Toronto
Well my phone went crazy and kept restarting now its stable but I don't have anythign sync, and gapps aren't installed.

Could it be Gapps that causes the reboot?
 

chadouming

Senior Member
Aug 27, 2009
2,208
1,982
On the interwebz
Well my phone went crazy and kept restarting now its stable but I don't have anythign sync, and gapps aren't installed.

Could it be Gapps that causes the reboot?

Yeah I have the same problem too, kept rebooting like crazy
I flashed the minimal gapps

sent from my LG Optimus G E971 CM10.1 & Asus Nexus 7

Don't think so, i would not see why Gapps make your phone rebooting. If anyone is willing to test to only flash the rom and not add the Gapps, we'll see.
 

gotfrydm

Senior Member
Mar 5, 2009
63
2
Getting constant reboots with the latest build. The build works fine when connected to a wifi source once I leave my house it reboots every couple of minutes or so.
 

Attachments

  • Log_2013-02-19_14-30-17.txt
    320 KB · Views: 2
  • Log_2013-02-19_14-52-40.txt
    248 KB · Views: 1

birnie

Member
Jun 10, 2009
40
0
Re: CM 10.1 for Canadian Optimus G

That makes sense stable at home on WiFi, then when I leave house reboot city.

Sent from my Optimus G using Tapatalk 2

---------- Post added at 04:04 PM ---------- Previous post was at 03:48 PM ----------

I turned WiFi off to see if it makes any difference. Will report back.

Sent from my Optimus G using Tapatalk 2
 

Top Liked Posts

  • There are no posts matching your filters.
  • 48
    Hi, This is a continuation of the CM 10.1 nightlies thread. Things has been moving on and we are now at CM 10.2. I have been working with xboxfanj, houstonn and bbelos to bring you this. Again, this is based on mako with adapted change for optimus G. This time we are even more in sync with CAF (Code Aurora Forum).

    What is working
    Everything.

    What is not working

    You tell me.

    Here are the repo needed for our devices :

    https://github.com/TeamPlaceHolder

    Of course, you have to be rooted, to have bootloader unlocked and a working recovery to flash this custom rom.

    DO NOT FLASH NEXUS 4 KENEL MADE BY 3rd PARTY. THIS WILL MOSTLY PERMA BRICK YOUR DEVICE.

    This is simply because people tend to use partition number and not by-name and our partition is different than nexus 4 ones. i.e. The rpm partition on our phone is the boot partition on nexus 4. So flashing a custom kernel will flash a boot.img in your rpm partition and then you are bricked. You have been warned.

    Like usually, i can't be hold responsible if you damage your phone during any of the process described in this thread.

    Thanks :

    Thracky and houstonn who also works with me on this.

    xplodwild
    codeworkx
    IOMonster
    sk8erwitskil
    faux123
    dvhexer
    Cyanogenmod Team

    and a special thanks to shelnutt2 who shown me how to fix 3G
    and juggie who found out the good file to change to get wifi working
    20
    Download

    All the downloads will go here :

    ribs.bbqdroid.org

    Use geeb package

    Gapps package :

    http://goo.im/gapps

    Modem :

    There is a newer modem now available (From JB update. Houstonn and I extracted each of them and made flashable so you don't need to do the painful process of kdz only to get a new baseband)

    MAKE SURE TO NOT FLASH KOREAN MODEM.

    http://downloads.codefi.re/houstonn/lgog/modem
    12
    How to intall that rom ?

    This require you to have TWRP or CWM already installed on your device. I recommand the former. On our device, this mainly mean you have rooted your phone and unlocked the bootloader.

    Apparently, it seems these instruction where not clear enough. So I'll try to make them dumbproof. If you are not following these instruction and it doesnt work, dont expect support. It's like buying a cake mix where you only need to add milk and call the company saying their product is bull****, you added water and only got a brick. To add to this metaphor, Asking if it's because you used CWM instead of twrp or reverse is like saying : Did it didnt work because i used a fork instead of a whip to mix it ?

    To flash this rom, you have to be on older Bootloader. You can alternatively flash the bootloader i linked in this thread. Read the post carefully before you flash.

    1. Download file in the download section.
    2. Put the rom AND the gapps on your internal SDCard.
    3. Reboot into recovery.
    4. Flash CM rom.
    5. Flash Gapps package.
    6. DO A FACTORY RESET (EMPHASIS HERE)
    7. reboot into system
    11
    There is a new build up. It has fixed bluetooth and has latest cm changes.

    Sent from my Optimus G using xda premium
    8
    Is there ANY WAY you can add to this the changes in faux123's Nexus 4 kernel (see here http://rootzwiki.com/topic/36722-kernellinux-340-makojbuvoctuncifsv001-nov-30/#entry1032460) to reduce the horrible msm_hsic_host wakelock battery drain?

    You sir, deserve a punch in the face. Come on. We are not at optimizing things. I'm still trying to figure out what is working or not. This is really stupid.

    Note to all other user : I WILL NOT ACCEPT FEATURE BEFORE EVERY PROBLEMS HAVE BEEN SOLVED.

    on a related note to your question, if you would have read carefully, you would have seen that i already use faux123 kernel . . .
    Anyway, this is not going to be the case soon.