[Q] Bell Z ultra stock ftf

originalspic said:

Hey guys. Does anyone by chance have a BELL stock ftf that they could link me or re-direct me where i can find one? I cant use any other ones at the moment.

Since i updated to the latest 4.3 and went to downgrade to re root my device i have been having issues with my device and can't get any data connectivity on my phone but can make calls.

I was hoping to flash the stock rom so that everything will work again.

Yeah i can use the apn settings for bell to achieve most of my data connectivity but i would perfer full usage until i can get full root.

Click to expand...

Click to collapse

I'm on Bell and have no data connectivity issues on 4.3?

Unfortunately I don't have the old FTF's - I was considering extracting them prior to upgrading but I didn't really want to wait any longer.

What issues are you having?

Have you installed the C6806 firmware?

originalspic said:

yeah i have the similar issue. when i downgraded from 4.3 to 4.1 with a 6806 it didn't transfer my bell info over. I am not able to access any data connection unless setup the apn for bell and then i get connectivity. i am currently running 4.2.2 under a c6833 model with apn set up and works alright. but a lot of my bell stuff is gone and would like to have something setup just in case. the rest of the phone does work pretty darn well so far. except it keeps trying to ask to update to 4.3 again. I was going to un-root the device and try to do the update but i am unsure how it would fair with the phone since its not c6833 and not 6806. And instead of it saying "LTE" it says "4G" with is more of a little thing that bugs me personally lol

Click to expand...

Click to collapse

I still don't understand what you mean by 'works alright' - what is it you are missing?

Adding the apn and having it be there when you put the phone on the first time are no different from one another? So long as you have the exact settings?

Post screenshots of your APN settings and I'll tell you if you're missing something.

originalspic said:

I have the network working now as good as its going to get. so no more problems ATM. The only thing at this point is to have a copy of the original bell ftf. jujst incase i have to send this puppy out for repairs or if i decide to sell it.

Click to expand...

Click to collapse

wait for the next firmware udate and build a FTF from that and post an upload to the FTF thread.

Did you get the bell ftf plz share

originalspic said:

Hey guys. Does anyone by chance have a BELL stock ftf that they could link me or re-direct me where i can find one? I cant use any other ones at the moment.

Since i updated to the latest 4.3 and went to downgrade to re root my device i have been having issues with my device and can't get any data connectivity on my phone but can make calls.

I was hoping to flash the stock rom so that everything will work again.

Yeah i can use the apn settings for bell to achieve most of my data connectivity but i would perfer full usage until i can get full root.

Click to expand...

Click to collapse

Plz if you got the ftf files plz share i need the bell ftf

Or you know, you could get the right FTF from PC Companion, which downloads the regional version (in this case the Canadian version) since it looks up the device's CDA number. Just keep that in mind if you're going to send it in for repairs or whatever. Just un-root (if you're rooted), re-lock the bootloader (if it's unlocked - and remember to restore the TA partition) and just repair it using PC Companion. It's what i did when i sent my Ultra in for repairs last week.

LordManhattan said:

Or you know, you could get the right FTF from PC Companion, which downloads the regional version (in this case the Canadian version) since it looks up the device's CDA number. Just keep that in mind if you're going to send it in for repairs or whatever. Just un-root (if you're rooted), re-lock the bootloader (if it's unlocked - and remember to restore the TA partition) and just repair it using PC Companion. It's what i did when i sent my Ultra in for repairs last week.

Click to expand...

Click to collapse

+1

We, the global community cant help you Canadians with this one. Someone up there has to DL the firmware and build the FTF

I guess we could DL it but it would take a but of jiggery-pokery in the build.prop, and it might work???

Could someone with a bell 6806 copy and post the first 40 odd lines (or a zip of the whole thing) of the build.prop? I'll see if I cant build a FTF for Bell phones

Bell ftf ?

I tried to repair my phone with pc companion with flash mode when finished i found it was the same firmware 14.2.A.1.136 US Generic that i took from the repository and flashed earlier. Made an ftf from PC companion with the help of Flashtools flashed it and found the same. When i go to Bell website to see what is the latest software it says Android: 4.3 Firmware: 10.4.B.0.569. I think it has to do something with the CDA 1276-1569-R4B I guess it is for the US unbranded. I have no idea what is the CDA for Bell Canada c6806. Could some one help. If i get things right i can post the FTF so plz help.

---------- Post added at 01:15 AM ---------- Previous post was at 01:07 AM ----------

Can someone tell me what is the Customization version for Bell Canada Xperia Z ultra just to see if it stays same after flashing another FTF from another country.

Got it but upload speed too slow

Got the Bell frimware and also made the FTF but upload speeds are very slow may take 2-3 days I guess. Please suggest file hosting servive with best upload speeds my broadband gives me 500kbps but i get only 50kbps with google drive and dropbox

Cda for canada bell c6802

blueether said:

could someone with a bell 6806 copy and post the first 40 odd lines (or a zip of the whole thing) of the build.prop? I'll see if i cant build a ftf for bell phones

Click to expand...

Click to collapse

please can you make an ftf file from pc companion with cda version

*cough* @blueether

Sent from my C6833 using Tapatalk

I'll play whan I get home from work

Sent from my Xperia Z Ultra using Tapatalk

Sorry, not enpugh to get Sony to thing that my C6802 is a Bell C6805

Build prop

blueether said:

Sorry, not enpugh to get Sony to thing that my C6802 is a Bell C6805

Click to expand...

Click to collapse

##### Merging of the /util/data/semc_kernel_time_stamp.prop file #####
ro.build.date=Tue Nov 19 19:53:25 2013
ro.build.date.utc=1384858405
ro.build.user=BuildUser
ro.build.host=BuildHost

##### Final patch of properties #####
ro.build.product=C6806
ro.build.description=C6806-user 4.3 RHINE-1.1-131125-1201 eng.hudsonslave test-keys

ro.product.brand=Sony
ro.product.name=C6806
ro.product.device=C6806
ro.build.tags=release-keys
ro.build.fingerprint=Sony/C6806/C6806:4.3/14.2.A.0.290/eng.hudsonslave:user/release-keys

######################## Customized property values #########################
ro.semc.version.cust=1276-3513
ro.semc.version.cust_revision=R3B
ro.somc.customerid=6334
ro.cst.prm=1276-3472:R6B,1276-3470:R6B
#############################################################################


ro.config.ringtone=xperia.ogg
ro.config.notification_sound=notification.ogg
ro.config.alarm_alert=alarm.ogg
ro.semc.content.number=PA4

################# Updating of the SW Version #################
ro.semc.version.fs_revision=14.2.A.0.290
ro.build.id=14.2.A.0.290
ro.build.display.id=14.2.A.0.290

##### Values from product package metadata #####
ro.semc.product.model=C6806
ro.semc.ms_type_id=PM-0430-BV
ro.semc.version.fs=BELL-LTE
ro.semc.product.name=Xperia Z Ultra
ro.semc.product.device=C68
ro.product.model=C6806

# begin build properties
# autogenerated by buildinfo.sh
ro.build.version.incremental=eng.hudsonslave
ro.build.version.sdk=18
ro.build.version.codename=REL
ro.build.version.release=4.3
ro.build.type=user
ro.product.board=MSM8974
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8974
# ro.build.product is obsolete; use ro.product.device
# Do not try to parse ro.build.description or .fingerprint
ro.build.characteristics=default
# end build properties
#
# from device/qcom/msm8974/system.prop
#
#
# system.prop for msm8974
#

rild.libpath=/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
# Start in global mode
ro.telephony.default_network=0

debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false

ro.hdmi.enable=true
tunnel.decode=true
tunnel.audiovideo.decode=true
tunnel.multiple=true
lpa.decode=false
lpa.use-stagefright=true
persist.speaker.prot.enable=false
qcom.hw.aac.encoder=true
#
# system props for the cne module
#
persist.cne.feature=1

#system props for the MM modules

media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
media.aac_51_output_enabled=true
#37491 is decimal sum of supported codecs in AAL
#codecs: AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491

# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOLOGS 7:AllLOGS
vidc.debug.level=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
ro.data.large_tcp_window_size=true

#system props for time-services
persist.timed.enable=true

#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608

# System property for cabl
ro.qualcomm.cabl=1

#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=0

#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true

#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.sensors.gestures=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.camera.facialproc=false
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = true
#
# from device/somc/rhine/system.prop
#
#
# platform specific part of system.prop
#

#System prop for gralloc
persist.gralloc.cp.level3=1

#System props for the MM Audio
media.aac_51_output_enabled=true

# system property for somc thermal solution
ro.somc.thermal=system_monitor

#System props for the MM modules
encoder.video.profile=high

# aDSP sensors
ro.qualcomm.sensors.qmd=true
debug.qualcomm.sns.hal=w
ro.qc.sdk.sensors.gestures=false
ro.qc.sensors.max_accel_rate=false
ro.qc.sensors.max_gyro_rate=false
ro.qc.sensors.max_mag_rate=false
ro.qualcomm.sensors.pedometer=true
ro.qualcomm.sensors.pam=false
ro.qualcomm.sensors.scrn_ortn=false

# Default values/Locales for the hiding languages feature
ro.product.locale.excluded=ar_EG ar_IL fa_IR iw_IL

# Modem power save enabled
persist.radio.add_power_save=1

# Do not use mdp composition for more than 3 pipes
debug.mdpcomp.maxpermixer=3
# Disable mixed mode
debug.mdpcomp.mixedmode.disable=1
#
# from device/somc/togari/system.prop
#
#
# product specific part of system.prop
#
ro.usb.pid_suffix=19C

# NFC
ro.nfc.on.default=true
ro.nfc.se.sim.enable=true
ro.nfc.se.smx.enable=false
ro.nfc.icon.enable=false

#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.product-res-path=framework/SemcGenericUxpRes.apk
ro.com.android.dataroaming=false
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
ro.com.google.clientidbase=android-sonyericsson
ro.com.google.clientidbase.ms=android-sonymobile
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=4.3_r1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
ro.sf.lcd_density=320
ro.hwui.texture_cache_size=48
ro.hwui.layer_cache_size=32
ro.hwui.r_buffer_cache_size=4
ro.hwui.path_cache_size=24
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=5
ro.hwui.texture_cache_flush_rate=0.5
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=512
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x0
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1
ro.service.swiqi3.supported=true
persist.service.swiqi3.enable=1
ro.drm.active.num=6
ro.drm.active.0=marlin,1
ro.drm.active.1=playready,1
ro.drm.active.2=dtla,1
ro.drm.active.3=marlin_import,1
ro.drm.active.4=ckb,1
ro.drm.active.5=widevine,1
ro.sony.fota.encrypteddata=supported

---------- Post added at 10:29 AM ---------- Previous post was at 10:20 AM ----------

blueether said:

Sorry, not enpugh to get Sony to thing that my C6802 is a Bell C6805

Click to expand...

Click to collapse

I think that should be enough

Can you help sir

LordManhattan said:

*cough* @blueether

Sent from my C6833 using Tapatalk

Click to expand...

Click to collapse

Can you help our Canadian community by making an FTF with the help of given Build.prop please

Here it is thank you guys for your support

Got the .290 firmware for Bell mobility Canada

https://www.dropbox.com/s/1t6vmf9bfn...0Canada .ftf Hope this helps some one