nakyup wc13 doesnt have google map install to it?how to manually install it?
visit google play and install direct to your phone or here
nakyup wc13 doesnt have google map install to it?how to manually install it?
I clicked themeset > chose ICS > clicked theme change
My device reboot. Nothing change, should i run Themerun All are Hangul. I swear I will learn them
P.S. I will try them next 12h. I need stable run this day cuz I have to go out now
sir if the phone is in lowbat then on nakyup rom so it means it will not boot again because nakyup kernel cant charge when it is off?
is this right everyone?
so how to fix that problem when i cant reboot becuase its lowbat?
Did you install a phone lock application on your phone? If you did , it is better to uninstall, if you are still not sure as to how to adjust its settings or read the operations manual of that application on the web for help. From what you are saying, its likely that this locking software is not registered yet...so find out what or how you need to register
or
you have set your phone to roaming when you may not have such privileges
touch settings
touch wireless and network
touch Mobile Networks
untick Data Roaming
touch Network setting
use automatic
than reboot
IF not
touch "settings"
touch "Display"
touch "Screen timeout"
select 10 minutes or higher than 30 seconds
this will only stop your display timeout.
hope this helps.
Thanks for the suggestions.... But I have already tried these options... but not useful. I dont have any locking application installed.
In fact, i am seeing the same problem on couple of my friends mobiles also. They also have Any Call Galaxy S with them.
Any more suggestions? Thanks
rom and karnel which are not problematic for the SGS m110s frimware wc13
thank
,,,,,,,,,,,
I had the same question. Which is better, Stock Rom with Nakyup kernel, or Full Nakyup Rom. My banking Apps dont work with Nakyup rom, this is after unrooting, with tegrak I had no issues after un-rooting.(not a big deal)
I haven't tried the stock rom with kernel, been using Full Nakyup Rom without any issues (except for the known ones), OC to 1,3 since I installed it. Battery life is pretty good, but that's cause I switch to airplane mode at night.
using lidroid rat9
i have a question is it ok to use nakyup kernel on lidroid rat9 rom?
I tried this guide for converting Korean M250S to original I9100 and it works:
http://xdaforums.com/showthread.php?t=1595225z
Now is it possible to do something like this (i.e use i9000 PIT file) to turn M110s into i9000 without problems?
a member had earlier posted conversion to i9000 but claiming froyo was best, has yet to post details though
Final Solution:-Other methods deleted by Mod
[highlight]Mod Edit: While I understand that the purpose of this guide is to help those who have lost their IMEI's while flashing ROMS, this opens up a whole new can of worms as far as what can be done with it. The outcome is illegal in most countries in fact. Sorry.[/highlight]
Last edited by egzthunder1; 28th August 2012 at 09:05 PM.
Using Repair Kit to Unbrick M110SFirst stage :- For every Stage of Flashing RESTART ODIN and always use Fresh ODIN
1) download repair kit and unzip it (you will have 6 tar files)
2) put phone into download mode after battery pull
2) run odin and select m110s.pit under PIT (Re-partion option will be automatically ticked)
3) select M110S-PDA-PHONE-MOVI-REV03-DG23-1409-USER.tar.md5 under PDA
4) connect phone and Press start (within 10 min your phone will reboot into Eclair Firmware)
you will have a fully working phone after this, only needs further updates, so continue to stage 2
Second stage:-
1) put phone into download mode after battery pull
2) run odin select S1_KOR_DE09.pit under PIT (make sure you UNTICK the re-partition option in Odin)
3) select M110S-BOOT-DG23-1409.tar.md5 under CSC
4) connect phone and press start (within a few min phone will reboot)
Third Stage:-
1) put phone into download mode after battery pull
2) run Odin select M110S-NPS-IMAGE-REV03-DG23-1409-USER.tar.md5 under PDA
3) selct M110S-PHONE-REV00-DG24.0151_Develop.tar.md5 under PHONE
4) Connect Phone and select start ( within few min phone will reboot )
Fourth Stage:-
Your Phone is currently running its FIRST out of the box Firmware used in 2010 , so now you need to upgrade to the latest 2012 Stock ROM or Custom ROM of your choice so repeat Flashing Procedure to upgrade to Latest Firmware
IF unable to complete repair procedure
Final Solution:-
After receiving many requests for help, concerning stage 2 of the repair procedure, Failing or unable to complete as it gets stuck on Boot-loader upgrade or similar
My advice is to proceed to stage 4, meaning you Flash a Latest stock or custom after the Eclair ROM, this will solve the issue and you would be able to USE the phone .
so if it get stuck after stage 1 ( meaning phone functions using the oldest ROM ) , just continue to stage 4 and flash the latest ROM
Welcome to Pit StopEverything for and about the Korean Anycall Galaxy S from SamsungComments, Suggestion, Errors and Omissions are welcome.
Just register at XDA and post on Anycall forum
Be Advised that Most Mobile Phones have their own WIKI page on XDA Forum providing compiled knowledge about that particular phone and using them can provide many details that you may not be aware of, so always do a search first on the Wiki page for your unit.
Whatever you have done or may do with your phone because someone said so, is still your responsibility ...so take your time READ carefully to avoid making mistakes in haste, be calm and recheck the details.
Tested on FroYo firmware versions DI29 and SK05
Prerequisites:
rooted (I also recommend SuperUser)
busybox installed
You understand the benefits of being able to connect to a stateside OpenVPN server.
openVPN server account
-Removing the SIM card
-Placing it in another phone that has the "My Number" option (I used an iPhone, heard that older Sony Ericssons work too.)
-Entering my own number in international format (+63917~) (Prior to this, "Unknown" was also shown in the iPhone.)
-Inserting the SIM back to the M110s.
TouchKey F/W Info - *#86824#
- Has an "F/W Update" Button
- Can set the "Menu" and "Back" key sensitivity
From the dialer enter: 319712358
You will be prompted for a pasword: 774632