[DISCONTINUED] [21.10.13][Kernel] [SENSE 5] Alex-V_S.E_2.7 PA3/PP/S2W/ViperUMS/LOCK4C

[COLOR="Red"][SIZE="5"]CHANGELOG[/SIZE][/COLOR]

Changelog 2.7 Classic PA 3

-mpdecision hotplug again (better battery)
-interactive + deadline standard
-4 versions :
 = old s2w
 = old s2w with led on sweep
 = new s2w with dt2w
 = without s2w
-rest is the same as PA 2
-would be the last version before the new sources are out

Changelog 2.7 Classic PA 2

-original hotplug (still faster in ui)
-no auto bln (had a 8h wakelock from buttons blink -so its bad for battery)
-still buttons backlight brighness control
-smartmax and row as default (to compensate battery from original hotplug)
-wakes fast
-disabled 3D Scaling as default (can be enabled if wanted)
-fastcharge again
-3 versions
 =old s2w
 =old s2w with led buttons go on on slide (buggy)
 =new s2w with dt2w
-repacked with sebby´s edited ramdisk (optimations and htc pnp manager compatible)
-enabled wifi powersave again (like original)


Changelog 2.7 Classic PA 1

-no usb fastcharge (original battery driver) [will look if its better..as some had problems with charging
-fixed mpdecision lag
-3versions
 =original hotplug + old s2w
 =mpdecision + old s2w (my fav)
 =mpdecision + new s2w (also with dt2w)



Changelog 2.7 Classic

-original nvidia autohotplug (like stock)
-no oc
-only a bit uv (mv values from 304 xmister version) [for more stable]
-old and new s2w version (new with dt2w)

Changelog 2.6 Play Around V3

-fixed Viper UMS (Sorry forget to change one little number)
 = if you dont need this, you dont need to flash it..no other changes

Changelog 2.6 Play Around V2

-mpdecison and cpuquiet hotplug in one version (combined)
 =hope we get the best things of both now (we would see :) )
-changed some brightness things
-changed light sensor values to default
-changed proximity sensor values to default
-as requested old and new s2w version

Changelog 2.6 Play Around V1

-cpuquiet hotplug (as many say 2.4 is quicker which have cquiet and govs are the same as 2.4) [i still also find it quicker...you dont would see this in benchmark...but ui is nicer i think]
-revert allow reconnect if already connected (should solve some wifi wakelocks)
-disabled Wifi Power Saver by default (since than i can use xda app better...before i had probs that it dont do much know and than...now i can enter and wrote in all threads without closing app or reconnect wifi)
-only old s2w (play around version of the kernel i use)
-some updates buttons btw s2w


Changelog 2.6 RC

-mpdecision hotplug (after your tests..it seems the best..thx to all)
-fixed light sensor (this fixes button backlight only go off on really sunny day..back to normal now)
-wifi: allow reconnect if already connected
-wifi: pre power up wifi
 =will fix sometimes not working wifi [if you still see its connected] i hope...my tests are good
-interactive, smartmax, pmc from 2.4...it looks like these are the best atm
-still 3 versions: old s2w, new s2w with dt2w and without s2w
-updated git with latest changes

Changelog 2.6 Test 1

-fixed deep sleep problem (at least for me :) )
 =new battery driver
-2 Test Versions
 =cpuquiet
 =mpdecision
---please make your choise for future kernels (speed, battery and so on)

Changelog 2.5 RC 2

-fixed camera recording:
 =to fix i had to add tegra 4 video driver again
-3 versions:
 =old s2w
 =new s2w (with dt2w)
 =without s2w

Changelog 2.5 RC

-still based on my 1.6 Kernel Source
-cpuquiet hotplug (instead of mpdec) [acts now more like 2.4] (but still working 4x Core on 100%+mhz)
-smoother as test version
-fixed wakeup lockscreen lag
-auto-bln is back
-2 versions old and new s2w (new with dt2w)
-delete again the 25 mhz step
-since 1.6 sources: (Read Changelog from 1.6 and below)
 =tegra 3 drivers (original drivers) (should be fix mhl) 
 =internet pass through
 =drive droid support (needs testing, was working in 1.6 and did not change it)
-if all is ok...next kernel will be not come before next week or so...so we can have a little break from flashing and just use our phone ;) :)



Changelog 2.5 Test1

-based on my 1.6 Kernel Source fixed for Sense 5 
 ( for kernel devs..use board endovor /board endavor panel and board endavvor power from trips source and it will boot)
-old s2w (Test version...new comes on RC)
-no auto bln (like in 1.6..but next version have it again)
-Rest like in the Changelog from 1.6


Changelog 2.4 RC

-CPUQUIET Hotplug (instead of mpdec.)
-added pmc gov again
-added gaming gov again
-finetuned interactiv gov
-fixed lockcreen lag (at least for me in compare to 2.3)
-buttersmooth UI (at least for me in compare to 2.3)

Changelog 2.3 RC

-fixed and back to original wifi (no disconnect on screen off)
  (= maybe delete the old connect files from trip on system/etc/firmware )
-changed some bt settings (must be tested)
-2 versions old and new s2w (new s2w with dt2w)


Changelog 2.3 Test 1

-still mpdecision
-CPU/GPU Updates from                              [user=3235151]@kozmikkick[/user] source (thx my friend)
-kernel feels good for me atm...(have it since 20 min)
-Test kernel so only old s2w...(new will come if feedback is good )
[COLOR="Red"]For all with viper 4.0.2

Delete from system/bin the pnpmgr

than you can use the cpu viper tweak again (but its still better to use trickster)

this crappy htc stuff is not builded in the kernel.... with pnp...you will boot always with max cpu...and i want to boot save with 1300mhz max

[/COLOR]


Changelog 2.2 higher volt

-reduced oc for all to 1.6ghz (means variant free- want to have same things for all)
-set higher cpu volt
-finetune core volt
-gpu 228-520 mhz


Changelog 2.2 RC

-fixed slow downs (at least for me :) )
-fixed core voltage
-changed gpu to 200-533 mhz (instead 247-520) [533 in performance / 3d scaling off in trickster}
-fixed viper ums (very usefull if you are on ubuntu or such systems)
-also the rest of the test kernels 
-2 versions: old and new s2w (new s2w with dt2w)



Changelog 2.2 Test Kernel 12

-changed to cpu govs from 1.6 kernel
-reworked cpufreq a bit
-interactive have no lag again
-raised audio min to 204mhz
2 versions - Smartmax + Row
               - Interacive + deadline
= let me know which one you want
-people who still have speed problems...look into trickter if 3d gpu is off...if so switch it on..it can give stuck at normal cpu 475mhz lp mode (will look to this)

Changelog 2.2 Test Kernel 11

-MPDECISION is back
-Smartmax as default
-user voltage control
-Lock the kernel to 4 cores if you set 620mhz as minimum (for gaming)
 =set back to 51mhz min to not lock at 4 Cores
-Test Release so only old s2w
-still trips wifi (but working on it)


Changelog 2.1

-fixed all cores online
-fixed max Cpu Freq on boot back to 1300mhz
 (will fix the to hot on Start-save boot)
-original Nvidia Hotplug
-removed TDF Framework/Hotplug
-still based on trips ( so thx to him )
-OC
-Auto_BLN (led backlight notification)
-LED backlight brightness
-(Viper)/UMS -(for other rom it must be tested)
-original Fastcharge (must be enabled before)
-Control how many cores online
-old S2W
-new S2W with DT2W
-new govs
 =Smartmax
 =PMC
 =Touchdemand
 =Gaming
-new I/O Sheduler
 =Row
 =Sio
 =Cfq
-original vibration
-maybe more
-on my list:look to bt and wifi from original/mpdec/gpu interface/etc...etc




Changelog 2.0

-based on trips latest only working sense 5 kernel source (thx                                              [user=2689951]@TripNRaVeR[/user])
-first test release
-Sweep2Wake (S2W)
-pocket protection
-as kernel is based on his aosp source (which is the latest updated) 
 =fixed Sound and usb
-as default interacive (with 1.3 max at boot) no oc atm
-as default deadline with 128kb read ahead
-no repack for sense 5 needed

-till we have the htc source i will look on mhl (because of tegra4 driver)...maybe back to original wifi and vibration and also will look at hotplug

Changelog 1.7

-smartmax and pmc gov from xm304
=to get it work some cpu patches from 304
(found one bug in last minute - i can set 1.6ghz but max is @1.55ghz
please dont report this - i know it and will fix)
-3 versions:
=old s2w (now with pocket protection and calibration control) - should solve call problems
=new s2w (this version contains the touchscreen source from viper 11 kernel + calibraion control)
=new s2w + dt2w (also with calibration control)
=new but still compatible viper ramdisk (also for all other sense roms-no need to repack)
-new viper tweaks beta 3.7.9 with calibraion control toggle (thx richmondo)
=means you can now quick toggle it on or off if you have call problems

next version should be a rc 1  with working vpn


Changelog 1.6 Test Kernel 1

-pocket protection for s2w/dt2w (using p-sensor to reduce accident wakes)
=this is why i uploud - must be tested
=in sys/android-touch it can be dis-enabled
-new battery driver (fix reboot while loading)
-lp1 low core voltage again
-mpdec instead of cpuquiet (for testing smoothness and battery)
-drive droid support (must be tested)
-back to tegra 3 video drivers (tegra4 gives problems with mhl)
-the test version have new s2w but no bln (but all versions will come)
-updated github



Changelog 1.5 Test Kernel 3

-removed the 25 mhz step (did not really stick)
 =and no this will not make your battery life bad
-original vibration driver (stronger again
-4 versions in one download
 = old s2w
 = old s2w with auto bln
 = new s2w
 = new s2w with auto bln
-please vote (thread poll) after try for your favorite kernel



Changelog 1.5 Test Kernel

-as requested auto-bln 
-old s2w with all old values and calibration off (multitouch fix)
=^ this should solve end call problem for someone...incoming needs testing
-lp core low voltage disabled (as i had a reboot while charging..since i got no problems)

Changelog 1.5

-OC and Voltage table from 0.8 again 
= (up to 1.6 ghz for variant 0+1 and 1.7 for 2+3)
-updated git

Changelog 1.4

-added tegra 4 patches from master tripnraver (thx for this)
 =anyway diff is not that big
-added back cpuquiet (bit more stable)
-raised up voltages a bit (should solve reboots for someone)
-next try to fix end call prob for someone (as i still dont really have this problem)
-added vibration driver fom tripnraver (thx for this)
-added vr sheduler
-some other small fixes
-updated git



Changelog 1.3

-changed cpu table values (still 1.55 ghz but the way it will be used)
-changed millivolts table (you want notice...but stabilty)
-again old and new s2w (the way you like it)
-added gaming gov (thx xmister) [see Epic Citadel Benchmark over 50)
-added pmc (battery gov)
-still nvidia hotplug
-very stable (at least for me 2 benchmark Epic Citadel and no reboot with gaming gov)
-perfect miixture between xmister / kozmickick /n3o / maxwen

Changelog 1.2 test version

-original nvidia autohotplug (now core control apps works)
-reduced for a test cpu to max 1.55 ghz (stabilty)
-to this a other voltage table
-hopefully fix for end call problem but not sure look here
https://github.com/kozmikkick/Endeavor3.1.10/commit/fc5feb0f3f2a92bbfba86a84ae7d245b595a5529

Changelog 1.1_fixed

-fixed voltage table..sorry

Changelog 1.1

-voltage table from 0.8 (more stable)
-old or new s2w 

Change 1.0

-complete rebased with 3.18 source
-340 mhz bug is now gone ( was the most used step now it goes really down and uses also 51 mhz good)
was not really used...used some patches from xmister 188v2 to get rid of this bug..so big thx 
-again 1.6 ghz max (next v again with 1.7...i just wanna be safe @ first)
-very smooth


Change 0.9

-test kernel

Change 0.8

-oc and voltage table from latest kozmik version (big thx again, you are great)
-touch input updates (thx maxwen)
-s2w update (thx maxwen)
- my source git to this
https://github.com/Alex-V2/Alex-V_SE_OneX/tree/play2


Change 0.7
-removed auto-bln (its not stable enough for me)
-added complete ums (must be tested as i´m on viper
-added 85°C throttle back
-added the new s2w (no viper tweaks error-2-3 buttons) thx maxwen
-added Double tap 2 wake (DT2W) thx maxwen

2.7 Classic PA 3

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/Sense%205/Kernels/Alex-V_SE_2.7_classic_PA_2.zip/download[/url]

2.7 Classic PA 1

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/Sense%205/Kernels/Alex-V_SE_2.7_PA_1.zip/download[/url]

2.7 Classic

[url]https://www.dropbox.com/s/wz782of18lgrxd0/Alex-V_SE_2.7_classic.zip[/url]

2.6 PA V3

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/Sense%205/Kernels/Alex-V_SE_2.6_play_around_v3.zip/download[/url]

2.6 PA V2

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/Sense%205/Kernels/Alex-V_SE_2.6_play_around_v2.zip/download[/url]

2.6 PA V1

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/Sense%205/Kernels/Alex-V_SE_2.6_play_around_v1.zip/download[/url]

2.6 RC

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/Sense%205/Kernels/Alex-V_SE_2.6_RC.zip/download[/url]

2.6 Test 1

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/Sense%205/Kernels/Alex-V_SE_2.6_t1.zip/download[/url]

2.5 RC 2

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/Sense%205/Kernels/Alex-V_SE_2.5_RC_2_fixed_camera.zip/download[/url]


2.5 RC 1

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/Sense%205/Kernels/Alex-V_SE_2.5_RC_old%2Bnew_s2w_upload_2.zip/download[/url]

2.5 Test 1

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/Sense%205/Kernels/Alex-V_SE_2.5_T1.zip/download[/url]

2.4 RC

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/Sense%205/Kernels/Alex-V_SE_2.4_RC_old_and_new_s2w.zip/download[/url]


2.3 RC

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/Sense%205/Kernels/Alex-V_SE_2.3_RC_old_and_new_s2w.zip/download[/url]

2.3 Test 1

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/Sense%205/Kernels/Alex-V_SE_2.3_test1.zip/download[/url]

2.2 higher volt

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/Sense%205/Kernels/Alex-V_SE_2.2_higher_volt.zip/download[/url]

2.2

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/Sense%205/Kernels/Alex-V_SE_2.2_RC_old%2Bnew_s2w.zip/download[/url]

2.2 Test 12

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/Sense%205/Kernels/Alex-V_SE_2.2_test12.zip/download[/url]

2.2 Test 11

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/Sense%205/Kernels/Alex-V_SE_2.2_test11_with_firm.zip/download[/url]

2.1

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/Sense%205/Kernels/Alex-V_SE_2.1_old%2Bnew_s2w_dt2w.zip/download[/url]

2.0

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/Sense%205/Kernels/Alex-V_SE_2.0_s2w.zip/download[/url]

1.7

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/kernels2/Alex-V_SE_1.7_new___old_s2w_dt2w.zip/download[/url]

1.6

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/kernels/Alex-V_SE_1.6_test_v1.zip/download[/url]

1.5_Test Version_3

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/kernels/Alex-V_SE_1.5_test3.zip/download[/url]

1.5 Test Kernel 1

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/kernels/Alex-V_SE_1.5_test_kernel.zip/download[/url]

1.5

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/kernels/Alex-V_SE_1.5.zip/download[/url]

1.4

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/kernels/Alex-V_SE_1.4_tegra_4.zip/download[/url]

1.3

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/kernels/Alex-V_SE_1.3.zip/download[/url]

1.2

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/kernels/Alex-V_SE_1.2_test.zip/download[/url]


1.1

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/kernels/Alex-V_SE_1.1_fixed.zip/download[/url]

1.0

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/kernels/Alex-V_SE_1.0.zip/download[/url]

0.8

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/kernels/Alex-V_SE_0.8.zip/download[/url]

0.7

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/kernels/Alex-V_SE_0.7.zip/download[/url]

0.6

[url]http://sourceforge.net/projects/alexvhtcroms/files/Alex-V%20Htc%20Roms/kernels/Alex-V_SE_0.6_with_call_fix.zip/download[/url]

[COLOR="Red"][SIZE="5"]CHANGELOG[/SIZE][/COLOR]

Changelog 2.1

-fixed all cores online
-fixed max Cpu Freq on boot back to 1300mhz
 (will fix the to hot on Start-save boot)
-original Nvidia Hotplug
-removed TDF Framework/Hotplug
-still based on trips ( so thx to him )
-OC
-Auto_BLN (led backlight notification)
-LED backlight brightness
-(Viper)/UMS -(for other rom it must be tested)
-original Fastcharge (must be enabled before)
-Control how many cores online
-old S2W
-new S2W with DT2W
-new govs
 =Smartmax
 =PMC
 =Touchdemand
 =Gaming
-new I/O Sheduler
 =Row
 =Sio
 =Cfq
-original vibration
-maybe more
-on my list:look to bt and wifi from original/mpdec/gpu interface/etc...etc


:)