[KERNEL/RECOVERY][ICS] Rogue *Stock FB27* (Updated 3/5/12)

Status
Not open for further replies.
Search This thread
By:
Advanced…
Steady Hawkin

Steady Hawkin

Inactive Recognized Developer
Mar 27, 2011
588
2,653
Seattle
TheRogueLogoGreen.png






CWM Rogue Recovery
&
Rogue *Stock FB27* Kernel

​






Presented By-

TDR
Bazar6
Steady Hawkin​




Important Info-

-Flashing anything for ICS is risky and could result in damage to your device. By flashing this you agree that we are not held liable.

-You will not receive any OTA after flashing this.

-Notification light will not work on CM9

-You will not be able to install apps to external sdcard on CM9 (you can still access external sdcard though)


General-

***This kernel/recovery is for use with ICS Rom's Only!***

**Also, this kernel and recovery does not install superuser or busybox, please have both installed prior to flashing.**

Rogue Recovery v1.2.2 Includes:
  • CWM 5.0.2.8 Base
  • Overhauled UI
  • New menus
  • Fewer clicks
  • Take a look and see what else
  • *See changelog

Kernel Includes:
  • Based on Calkulin's stock pulled FB27
  • Bootanimation Support
  • Init.d Support
  • *See changlog



Install Instructions-

ODIN-

-Make a nandroid in your current recovery then proceed
-Download tar from link below
-Place phone in download mode
-Open Odin and make sure only auto reboot is selected in the option list
-Click PDA and select the Rogue tar, then select start
-Let the phone boot back up fully, then reboot for best results
-Sit back and bask in the Rogue glory!


CWM-

-Make a backup in your current recovery
-Download zip from link below
-Place zip on sdcard
-Boot into recovery and install zip
-Let the phone boot back up fully, then update profile and PRL
-Reboot
-Sit back and bask in the Rogue glory!



Download-



ODIN-


Rogue Stock FB27 (Odin Tar)


CWM ZIP-


Rogue Stock FB27 (CWM Zip)



Source-

Can be found on Github- HERE



Thank You-

Koush
CyanogenMod Team
j-r0dd
Calkulin
codeworkx
​







Donate to Team Rogue HERE




-Follow me on Twitter/G-Plus for early releases-​
 
Last edited:
  • Like
Reactions: nathantaylor, rocket321, jonas916 and 120 others
Steady Hawkin

Steady Hawkin

Inactive Recognized Developer
Mar 27, 2011
588
2,653
Seattle
-Partial Changelog-​




FB27 (Official Release)

Kernel-
*Updated kernel and initramfs blobs to FB27
*Changed bootanimation handling again (note: not recommended to have both /system/bin/bootanimation and /system/bin/samsungani present at the same time)
+Replaced missing FOTA parts
*Changed dalvik-cache permissions to 773 for sbrissen-CM9

Recovery-
*Rogue v1.2.2
+Backported some recovery patches from CWM 5.5
*Adjusted recovery text layout a bit


FB21 rev2 (Official Release)

Kernel-
*Add explicit handling for /data/system to fix bootloop on factory reset (thanks Calkulin!)

Recovery-
*Rogue v1.2.1


FB21 (Official Release)

Kernel-
+Based on stock pulled FB21 (Thanks Calkulin!)
+Works on both stock ICS Touchwiz Roms and CM9

Recovery-
*Rogue v1.2.1


FB17 (Official Release)

Kernel-
+Based on stock pulled FB17 (Thanks ACS Team!)
+init.d and bootanimation support
*Adjust mount options in init.rc
*Modified init files for CM9 (C build only)

Recovery-
*Rogue v1.2.1
*Fix USB mount error
*Fix toggle options in menus
*Fix script assert toggle
**Disable assert is still broken


FB15 (Official Release)

Recovery-
***Recovery mounting is broken***
*Rogue v1.2.0
+Updated to CWM 5.0.2.8, bugfixes
+Roboto font, style changes
*Fix script assert switch

Kernel-
+Based on stock pulled FB15 (Thanks Calkulin!)


EL29 (Official Release)

Recovery-
*Rogue v1.1.2

Kernel-
+Based on EL29 stock pulled kernel (Thanks Calkulin and puertoblack2003 !)
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support


EL26 (Official Release)

Recovery-
*Rogue v1.1.2

Kernel-
+Based on EL26 stock pulled kernel (Thanks Calkulin!)
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support


EL13 (Official Release)

Recovery-
+Confirmation screen in low space situation
*Rogue v1.1.2

Kernel-
+Based on EL13 stock pulled kernel (Thanks Calkulin!)
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support


EK02 (Official Release)

Recovery-
*Rogue v1.1

Kernel-
+Based on kingsway8605's stock pulled EK02 kernel
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support



EG30 rev2 (Official Release)

Recovery-
+Based on CWR 5.0.2.7 (with old keyconfig)
+Backup/Restore on internal storage (/emmc)
+Mount internal storage over USB

Kernel-
*Remained unchanged



EG30 (Official Release)

Recovery-
+Based on CWM 5.0.2.6
+Overhauled UI
+Fewer clicks & new menus (Thanks j-r0dd)
+Battery level in conformation screen

Kernel-
+Based on Bubby's stock pulled EG30 kernel
+Based on Codeworkx's initramfs
+Init.d support
+Bootanimation support
 
Last edited:
  • Like
Reactions: Pheno.menon, latinmaxima, DutchDogg54 and 26 others
Steady Hawkin

Steady Hawkin

Inactive Recognized Developer
Mar 27, 2011
588
2,653
Seattle
Last edited:
  • Like
Reactions: nathantaylor, slick4mitch, DutchDogg54 and 11 others
ffkip911

ffkip911

Senior Member
Feb 4, 2009
714
257
Seattle, WA
using EL13 modem and TNz 1.3

Quadrant
Desperado - (OC 1504 on demand) 4700
EL13 stock (no OC) 4000

Net speed WIFI
Desperado - 3.91 DL/2.14UL/ping 16
EL13 stock - 14.49DL/3.39UL/ping 22

3g (on airave)
Desperado - 0.01DL/0.10UL/ ping 849
EL13 stock - 0.03DL/0.06UL/ping 308

Def improvement on WIFI (but I did upgrade modem as well), will check 3G speeds later. Stock quadrant is quite impressive
 
Last edited:
  • Like
Reactions: majmuni, mindgrind and neilkarunatilaka
Dchibro

Dchibro

Senior Member
Jul 28, 2011
1,040
280
San Diego, CA
bavarianblessed said:
Anyone else notice that the jig no longer resets the download counter or is it just me? Either way nice work Hawkin:)
Click to expand...
Click to collapse

This would be part of the bootloader changing I believe. What ROM/Kernel base were you running before flashing this kernel, and had you successfully used the jig with that setup? I had read about Samsung changing the bootloader on International GS2s that caused the jig to no longer work. It very well could be a 2.3.6 thing.

A solution could be to downgrade flash the EG30 full system TAR, use the jig, then use sfhub's autoroot and install CWM, then use recovery to flash your ROM, Kernel and Modem.
 
Last edited:
Z

zedmay

Guest
I flashed Calk 's EL13 modem only, so Should I flash Rogue EL13 kernel?

Sent from my SPH-D710 using xda premium
 
H

Henri Blanche

Senior Member
Nov 14, 2008
141
22
Duluth, GA
I have also flashed the new modem and Rogue kernel without any obvious unwanted side effects although I haven't really had a chance to test this out to determine if I'm experiencing any benefits.
 
Dchibro

Dchibro

Senior Member
Jul 28, 2011
1,040
280
San Diego, CA
crawrj said:
Using Calk's deodexed rom, EL13 modem and this kernel. I also cleared it on ek02 cwm kernel on the same system.
Click to expand...
Click to collapse

Ok cool. So EK02 ROM and kernel, and EL13 kernel covered and confirmed working with the jig. The only difference could be if the guy who reported it flashed the stock EL13 ROM as well, which may have changed the bootloader? If not, then it sounds like some kind of coincidence.
 
  • Like
Reactions: drleo1
crawrj

crawrj

Senior Member
Nov 2, 2007
3,557
3,865
Dchibro said:
Ok cool. So EK02 ROM and kernel, and EL13 kernel covered and confirmed working with the jig. The only difference could be if the guy who reported it flashed the stock EL13 ROM as well, which may have changed the bootloader? If not, then it sounds like some kind of coincidence.
Click to expand...
Click to collapse

I am on el13 rom. Should have specified that.

Sent from my SPH-D710 using xda premium
 
  • Like
Reactions: musclehead84
JohnCorleone

JohnCorleone

Senior Member
Dec 19, 2010
16,188
5,864
Whittier,CA
Dchibro said:
Oh I see. I saw "Calk's ROM" and just assumed it was his EK02 based release. You meant his Deodex of stock EL13. Well, I'm at a loss then. Unless more people report it I'll chalk it up to an anomaly of some sort.
Click to expand...
Click to collapse

Thanks for trying to get to the bottom of this. Its the only thing holding me back right now...

Sent from my SPH-D710 using xda premium
 
Status
Not open for further replies.

Similar threads

KBizzle
  • Locked
[ROM]AOKP Build 37[FE21 Kernel][OS 4.0.4]UPDATED 05/24/12
Replies
8K
Views
852K
crypt0kiddie
crypt0kiddie
rujelus22
[ROM] [TeaM VeNuM] The Blu Kuban FL24 [Kuban Kernel\Odexed] (Updated 01-30-13)
Replies
14K
Views
1M
miggsr
miggsr
rwilco12
  • Locked
[ROM][TN] MIJJz JB GOODNESS JB 4.1.2 FK23 v1.0.3 (Updated 12/21/2012)
Replies
18K
Views
2M
bilgerryan
bilgerryan
kc_exactly
ICS for Epic Touch!!! FF18 Update thread
Replies
11K
Views
2M
M
mikelav456
PhantomHacker
[ROM]Phantom's Blazer Rom[Yo][8/2/12][v0.1.5][FF18]
Replies
10K
Views
1M
asd87
asd87

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 123
    Steady Hawkin
    Steady Hawkin
    TheRogueLogoGreen.png






    CWM Rogue Recovery
    &
    Rogue *Stock FB27* Kernel

    ​






    Presented By-

    TDR
    Bazar6
    Steady Hawkin    ​




    Important Info-

    -Flashing anything for ICS is risky and could result in damage to your device. By flashing this you agree that we are not held liable.

    -You will not receive any OTA after flashing this.

    -Notification light will not work on CM9

    -You will not be able to install apps to external sdcard on CM9 (you can still access external sdcard though)


    General-

    ***This kernel/recovery is for use with ICS Rom's Only!***

    **Also, this kernel and recovery does not install superuser or busybox, please have both installed prior to flashing.**

    Rogue Recovery v1.2.2 Includes:
    • CWM 5.0.2.8 Base
    • Overhauled UI
    • New menus
    • Fewer clicks
    • Take a look and see what else
    • *See changelog

    Kernel Includes:
    • Based on Calkulin's stock pulled FB27
    • Bootanimation Support
    • Init.d Support
    • *See changlog



    Install Instructions-

    ODIN-

    -Make a nandroid in your current recovery then proceed
    -Download tar from link below
    -Place phone in download mode
    -Open Odin and make sure only auto reboot is selected in the option list
    -Click PDA and select the Rogue tar, then select start
    -Let the phone boot back up fully, then reboot for best results
    -Sit back and bask in the Rogue glory!


    CWM-

    -Make a backup in your current recovery
    -Download zip from link below
    -Place zip on sdcard
    -Boot into recovery and install zip
    -Let the phone boot back up fully, then update profile and PRL
    -Reboot
    -Sit back and bask in the Rogue glory!



    Download-



    ODIN-


    Rogue Stock FB27 (Odin Tar)


    CWM ZIP-


    Rogue Stock FB27 (CWM Zip)



    Source-

    Can be found on Github- HERE



    Thank You-

    Koush
    CyanogenMod Team
    j-r0dd
    Calkulin
    codeworkx
    ​







    Donate to Team Rogue HERE




    -Follow me on Twitter/G-Plus for early releases-​
    View
    37
    Steady Hawkin
    Steady Hawkin
    Just a quick update-

    We have an FC05 repack almost ready, going to try a few tweaks and test for a bit before we release. Notification lights now work thanks to Sbrissen.

    If leaks keep coming at this rate we are going to pick and choose which repacks we do, this is getting out of control ;)

    Also, on the next release we are going to start using a new thread style. There will be a new thread in development for each repack (instead of having all of them on the same thread). And a thread in Q&A to discuss each specific repack. This way its easy to discuss comments/questions/concerns on each release and its keeps things organised.
    View
    29
    Steady Hawkin
    Steady Hawkin
    -Partial Changelog-​




    FB27 (Official Release)

    Kernel-
    *Updated kernel and initramfs blobs to FB27
    *Changed bootanimation handling again (note: not recommended to have both /system/bin/bootanimation and /system/bin/samsungani present at the same time)
    +Replaced missing FOTA parts
    *Changed dalvik-cache permissions to 773 for sbrissen-CM9

    Recovery-
    *Rogue v1.2.2
    +Backported some recovery patches from CWM 5.5
    *Adjusted recovery text layout a bit


    FB21 rev2 (Official Release)

    Kernel-
    *Add explicit handling for /data/system to fix bootloop on factory reset (thanks Calkulin!)

    Recovery-
    *Rogue v1.2.1


    FB21 (Official Release)

    Kernel-
    +Based on stock pulled FB21 (Thanks Calkulin!)
    +Works on both stock ICS Touchwiz Roms and CM9

    Recovery-
    *Rogue v1.2.1


    FB17 (Official Release)

    Kernel-
    +Based on stock pulled FB17 (Thanks ACS Team!)
    +init.d and bootanimation support
    *Adjust mount options in init.rc
    *Modified init files for CM9 (C build only)

    Recovery-
    *Rogue v1.2.1
    *Fix USB mount error
    *Fix toggle options in menus
    *Fix script assert toggle
    **Disable assert is still broken


    FB15 (Official Release)

    Recovery-
    ***Recovery mounting is broken***
    *Rogue v1.2.0
    +Updated to CWM 5.0.2.8, bugfixes
    +Roboto font, style changes
    *Fix script assert switch

    Kernel-
    +Based on stock pulled FB15 (Thanks Calkulin!)


    EL29 (Official Release)

    Recovery-
    *Rogue v1.1.2

    Kernel-
    +Based on EL29 stock pulled kernel (Thanks Calkulin and puertoblack2003 !)
    +Based on Codeworkx's initramfs
    +Init.d support
    +Bootanimation support


    EL26 (Official Release)

    Recovery-
    *Rogue v1.1.2

    Kernel-
    +Based on EL26 stock pulled kernel (Thanks Calkulin!)
    +Based on Codeworkx's initramfs
    +Init.d support
    +Bootanimation support


    EL13 (Official Release)

    Recovery-
    +Confirmation screen in low space situation
    *Rogue v1.1.2

    Kernel-
    +Based on EL13 stock pulled kernel (Thanks Calkulin!)
    +Based on Codeworkx's initramfs
    +Init.d support
    +Bootanimation support


    EK02 (Official Release)

    Recovery-
    *Rogue v1.1

    Kernel-
    +Based on kingsway8605's stock pulled EK02 kernel
    +Based on Codeworkx's initramfs
    +Init.d support
    +Bootanimation support



    EG30 rev2 (Official Release)

    Recovery-
    +Based on CWR 5.0.2.7 (with old keyconfig)
    +Backup/Restore on internal storage (/emmc)
    +Mount internal storage over USB

    Kernel-
    *Remained unchanged



    EG30 (Official Release)

    Recovery-
    +Based on CWM 5.0.2.6
    +Overhauled UI
    +Fewer clicks & new menus (Thanks j-r0dd)
    +Battery level in conformation screen

    Kernel-
    +Based on Bubby's stock pulled EG30 kernel
    +Based on Codeworkx's initramfs
    +Init.d support
    +Bootanimation support
    View
    22
    Steady Hawkin
    Steady Hawkin
    Going to skip FC05 in favor of FC06. Hope to have apps to SD working when we release.
    View
    18
    Steady Hawkin
    Steady Hawkin
    Sorry for the issue, we have fixed it now. Re-download from link in OP :D
    View

New posts