Full Rom SM-G900M

zyx99 · Jul 5, 2014

I just need the CSC file of Rom SM-G900M to put the SM-G900A to have the Portuguese of Brazil, but it is not possible to download separately. Where can I get?

jvabbdac · Jul 10, 2014

Dyone Aliano said:
I just need the CSC file of Rom SM-G900M to put the SM-G900A to have the Portuguese of Brazil, but it is not possible to download separately. Where can I get?

Need it too

PadsPCB · Jul 12, 2014

Simple tutorial in how to install G900MZTO1ANE4 on G900A

Hi everybody!
As many of you get a nice G900A from AT&T but lack the languages even if they are enabled.
Languages came inside eack application, so you should replace all with the international versions.
I tried this at first, and phone keeped on crashing.
So first of all get the Stock Firmware from here!
This is very usefull so you can allways reflash the phone again and again... I needed to do it several times until i managed to fix this:

What you will need:
1- EFS Professional from here
2- My EFS Pro G900M backup from here
3- Start your phone
4- Enable unknown sources in config|security
5- Enable USB Debuging in Development Mode (tap some times in config|about device|build number)
6- Root it with TowelRoot
7- Reboot anyway
8- Install BusyBox
(you may download and save towelroot and busybox to the sd card so you can skip all nonsense on starting)
9- Run busybox and allow it to install all stuff.

10- On your PC, extract the EFS Professional to some place.
11- Run EFS pro
12- Accept RSA on computer and shell on ADB
13- On EFS Pro select the Backup tab
14- On Device Filters select ***All Partitions***
15- Deselect All
16- Select efs (/dev/block/mmcblk0p12)
17 Backup this

Now EFS Pro will have created a folder named EFSProBackup
18- Copy the SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz to this folder
19- Go to the Restore Tab and Refresh Backup Archives

You may now see both files, the SAMSUNG-SM-G900A_some_numbers_here.tar.gz and SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz
If the names are different and you only see the backup file you just did, just rename the G900M file to start similarly to the one you saved.

20- Select the file SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz(pc)
EFS Pro will copy file to the device
21- Select the boot.img and the system.img.ext4 and Restore.

22- You may enter in recovery and clean all to factory default and start your device now with full G900M system.

Hope this helps for now until we unlock the flash.

Best regards to all

zyx99 · Jul 24, 2014

Error

Thanks for the help, but unfortunately I get two errors:
On backup:
aaa.png and bbb.png
On restore:
ccc.png
Please, help me.
Thank you.

u1988 · Aug 1, 2014

PadsPCB said:
Hi everybody!
As many of you get a nice G900A from AT&T but lack the languages even if they are enabled.
Languages came inside eack application, so you should replace all with the international versions.
I tried this at first, and phone keeped on crashing.
So first of all get the Stock Firmware from here!
This is very usefull so you can allways reflash the phone again and again... I needed to do it several times until i managed to fix this:

What you will need:
1- EFS Professional from here
2- My EFS Pro G900M backup from here
3- Start your phone
4- Enable unknown sources in config|security
5- Enable USB Debuging in Development Mode (tap some times in config|about device|build number)
6- Root it with TowelRoot
7- Reboot anyway
8- Install BusyBox
(you may download and save towelroot and busybox to the sd card so you can skip all nonsense on starting)
9- Run busybox and allow it to install all stuff.

10- On your PC, extract the EFS Professional to some place.
11- Run EFS pro
12- Accept RSA on computer and shell on ADB
13- On EFS Pro select the Backup tab
14- On Device Filters select ***All Partitions***
15- Deselect All
16- Select efs (/dev/block/mmcblk0p12)
17 Backup this

Now EFS Pro will have created a folder named EFSProBackup
18- Copy the SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz to this folder
19- Go to the Restore Tab and Refresh Backup Archives

You may now see both files, the SAMSUNG-SM-G900A_some_numbers_here.tar.gz and SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz
If the names are different and you only see the backup file you just did, just rename the G900M file to start similarly to the one you saved.

20- Select the file SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz(pc)
EFS Pro will copy file to the device
21- Select the boot.img and the system.img.ext4 and Restore.

22- You may enter in recovery and clean all to factory default and start your device now with full G900M system.

Hope this helps for now until we unlock the flash.

Best regards to all

Thank you!

Hi,
I try to extract Languages from G900F for every USA S5 deviecs (Like Arabic and hebrew etc.)
But i don't what to do, your Instructions & G900M will bring me those (Heb & Arab lang) or all the Languages to every USA S5 Devices?
SM-G900A /G900T /G900W8/ G900M /G900T1 what if I try your files on Non-US devices ?

What this guide does? (/dev/block/mmcblk0p12) ?

What are the risks ?

It won't Brick the Device?
What about KNOX it will trip?
It will Prevent get OTA updates?
Can I use this guide on S4 / Note 3 ? (of course i will get other EFS files from Note 3 / S4)

My post:

http://xdaforums.com/galaxy-s5/help/languages-missing-s5-t2833249/post54530995#post54530995

Thank you!

PhamDung · Oct 19, 2014

PadsPCB said:
Hi everybody!
As many of you get a nice G900A from AT&T but lack the languages even if they are enabled.
Languages came inside eack application, so you should replace all with the international versions.
I tried this at first, and phone keeped on crashing.
So first of all get the Stock Firmware from here!
This is very usefull so you can allways reflash the phone again and again... I needed to do it several times until i managed to fix this:

What you will need:
1- EFS Professional from here
2- My EFS Pro G900M backup from here
3- Start your phone
4- Enable unknown sources in config|security
5- Enable USB Debuging in Development Mode (tap some times in config|about device|build number)
6- Root it with TowelRoot
7- Reboot anyway
8- Install BusyBox
(you may download and save towelroot and busybox to the sd card so you can skip all nonsense on starting)
9- Run busybox and allow it to install all stuff.

10- On your PC, extract the EFS Professional to some place.
11- Run EFS pro
12- Accept RSA on computer and shell on ADB
13- On EFS Pro select the Backup tab
14- On Device Filters select ***All Partitions***
15- Deselect All
16- Select efs (/dev/block/mmcblk0p12)
17 Backup this

Now EFS Pro will have created a folder named EFSProBackup
18- Copy the SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz to this folder
19- Go to the Restore Tab and Refresh Backup Archives

You may now see both files, the SAMSUNG-SM-G900A_some_numbers_here.tar.gz and SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz
If the names are different and you only see the backup file you just did, just rename the G900M file to start similarly to the one you saved.

20- Select the file SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz(pc)
EFS Pro will copy file to the device
21- Select the boot.img and the system.img.ext4 and Restore.

22- You may enter in recovery and clean all to factory default and start your device now with full G900M system.

Hope this helps for now until we unlock the flash.

Best regards to all

thanks

PhamDung · Oct 19, 2014

PadsPCB said:
Hi everybody!
As many of you get a nice G900A from AT&T but lack the languages even if they are enabled.
Languages came inside eack application, so you should replace all with the international versions.
I tried this at first, and phone keeped on crashing.
So first of all get the Stock Firmware from here!
This is very usefull so you can allways reflash the phone again and again... I needed to do it several times until i managed to fix this:

What you will need:
1- EFS Professional from here
2- My EFS Pro G900M backup from here
3- Start your phone
4- Enable unknown sources in config|security
5- Enable USB Debuging in Development Mode (tap some times in config|about device|build number)
6- Root it with TowelRoot
7- Reboot anyway
8- Install BusyBox
(you may download and save towelroot and busybox to the sd card so you can skip all nonsense on starting)
9- Run busybox and allow it to install all stuff.

10- On your PC, extract the EFS Professional to some place.
11- Run EFS pro
12- Accept RSA on computer and shell on ADB
13- On EFS Pro select the Backup tab
14- On Device Filters select ***All Partitions***
15- Deselect All
16- Select efs (/dev/block/mmcblk0p12)
17 Backup this

Now EFS Pro will have created a folder named EFSProBackup
18- Copy the SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz to this folder
19- Go to the Restore Tab and Refresh Backup Archives

You may now see both files, the SAMSUNG-SM-G900A_some_numbers_here.tar.gz and SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz
If the names are different and you only see the backup file you just did, just rename the G900M file to start similarly to the one you saved.

20- Select the file SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz(pc)
EFS Pro will copy file to the device
21- Select the boot.img and the system.img.ext4 and Restore.

22- You may enter in recovery and clean all to factory default and start your device now with full G900M system.

Hope this helps for now until we unlock the flash.

Best regards to all

hi, when restore, i have error : "Unable to extract archive !"

Plz, help me.

Rgds.

Jhon Allen · Feb 9, 2015

Excellent tutorial

PhamDung said:
hi, when restore, i have error : "Unable to extract archive !"

Plz, help me.

Rgds.

Hello, I'm from Brazil in the city of Santa Maria - Federal District. I just wanted to thank you for this post, because I have a Samsung Galaxy S5 SM-G900A and thanks to you I now am with him completely in Portuguese BR and all languages options. Many Thanks !!!!!

leascarneiro · Feb 21, 2015

g900a

bom dia

caro amigo de brasilia.
poderia por gentileza me passar seu e-mail para me ajudar nesta mudança de idioma do meu dispositivo SM-G900A?
FICO MUITO AGRADECIDO E AGUARDO.

abraços

leandro

bezano1 · Apr 7, 2015

leascarneiro said:
bom dia

caro amigo de brasilia.
poderia por gentileza me passar seu e-mail para me ajudar nesta mudança de idioma do meu dispositivo SM-G900A?
FICO MUITO AGRADECIDO E AGUARDO.

abraços

leandro

Boas.
tambem tenho o mesmo problema.
Como resolveu?
Obrigado.

jocapitao · May 25, 2015

PadsPCB said:
Hi everybody!
As many of you get a nice G900A from AT&T but lack the languages even if they are enabled.
Languages came inside eack application, so you should replace all with the international versions.
I tried this at first, and phone keeped on crashing.
So first of all get the Stock Firmware from here!
This is very usefull so you can allways reflash the phone again and again... I needed to do it several times until i managed to fix this:

What you will need:
1- EFS Professional from here
2- My EFS Pro G900M backup from here
3- Start your phone
4- Enable unknown sources in config|security
5- Enable USB Debuging in Development Mode (tap some times in config|about device|build number)
6- Root it with TowelRoot
7- Reboot anyway
8- Install BusyBox
(you may download and save towelroot and busybox to the sd card so you can skip all nonsense on starting)
9- Run busybox and allow it to install all stuff.

10- On your PC, extract the EFS Professional to some place.
11- Run EFS pro
12- Accept RSA on computer and shell on ADB
13- On EFS Pro select the Backup tab
14- On Device Filters select ***All Partitions***
15- Deselect All
16- Select efs (/dev/block/mmcblk0p12)
17 Backup this

Now EFS Pro will have created a folder named EFSProBackup
18- Copy the SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz to this folder
19- Go to the Restore Tab and Refresh Backup Archives

You may now see both files, the SAMSUNG-SM-G900A_some_numbers_here.tar.gz and SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz
If the names are different and you only see the backup file you just did, just rename the G900M file to start similarly to the one you saved.

20- Select the file SAMSUNG-SM-G900A_G900MZTO1ANE4.tar.gz(pc)
EFS Pro will copy file to the device
21- Select the boot.img and the system.img.ext4 and Restore.

22- You may enter in recovery and clean all to factory default and start your device now with full G900M system.

Hope this helps for now until we unlock the flash.

Best regards to all

Is there any way you can get me the SM-G900F version? I would be so thankful! I am even willing to donate you!

Polekat · Jul 7, 2015

Another option is to download a different keyboard from the play store, they usually don't require root and never require a computer. Many support a long list of languages and have a lot of emoji's. Just read the list of supported languages before download. After that, go to settings > language and input > keyboard, deselect the stock keyboard and select your new keyboard, then hit the gear next to it to select it's particular settings. After that, go to the settings on Google and select your language (this also enables the "translate" button when viewing peges in other languages if you enable Google translate). I believe that the play store MAY have a similar setting. After that you should be good to go on a stock ROM. I hope that helps you. ?

"The power of accurate observation is frequently called cynicism by those who don't have it."

Topics

Topics

Full Rom SM-G900M

zyx99

Guest

jvabbdac

Member

PadsPCB

Member

zyx99

Guest

Attachments

u1988

Senior Member

PhamDung

Member

PhamDung

Member

Jhon Allen

New member

leascarneiro

New member

bezano1

New member

jocapitao

Member

Polekat

Member

Similar threads

Top Liked Posts

New posts