[25/03/11]XDAndroid - Topaz [2.2.2][FRX06 Final]

Search This thread

gingercat

Senior Member
Oct 1, 2006
163
1
Lancaster
Using the hard "end call" button when making a call hides the caller app, but doesn't hang up - just be aware of this to avoid running up a costly bill!
 

HTC Touch Freak

Senior Member
Jul 22, 2008
471
3
CO
Using the hard "end call" button when making a call hides the caller app, but doesn't hang up - just be aware of this to avoid running up a costly bill!

I beleive the power button (Button on top of the phone) Is the "End-Call" Button. The Button on the front of the phone is home.

Mebe it might be best to switch the 2 and have the top button be home?
 

sentinel79

Senior Member
Jan 13, 2008
503
5
I noticed an issue with the blackstone build (google maps was scaled down and showing black borders) ... here's my new cmd line which fixed everything.

set cmdline "wifi.mac=XX:XX:XX:XX:XX:XX msmts_calib=0x395.0x3c9.0x79.0x77 msmvkeyb_toggle=off lcd.density=240 ppp.apn=wap.cingular ppp.username=WAP@CINGULARGPRS.COM ppp.password=CINGULAR1"

I put in the wifi mac but it hasn't helped from what I can tell but the key here is the 240 lcd density I believe (at least it's scaling properly on my Pure)
 

federaly

Senior Member
Oct 7, 2009
114
0
QLD,Brisbane
Tried running most apps, normally got either "blah-blah failed to load due to unexpected error" or the other one "qualcomm does not support this feature/graphic acceleration etc etc"

It's odd I can make calls but not get a "data connection"
 

marcydarcy

Senior Member
Jul 15, 2009
283
0
Still a lot todo here. If smem is running will be the next step as CR2 pointed out.

greez

Marcy
 
Last edited:

sentinel79

Senior Member
Jan 13, 2008
503
5
I'm getting random freezing that I can't reproduce. for instance I tried to add a shortcut to the screen once and it froze (rebooted and it worked time and time again) ... same scenario but with different things like adding a wallpaper or launching an app.

Just thought I'ld report in that freezing is definitely there for me.
 

olipheus

Senior Member
Aug 13, 2009
307
19
Anderstorp
No freezes at all here, except when I try to turn it off via the interface.. And both sending and recieving sms works (I read on some page that sending didn't work). Feels great that the devs made it this far :) great job guys!
 

federaly

Senior Member
Oct 7, 2009
114
0
QLD,Brisbane
Really odd but good in a way is that since rebooting back into WinMo everything is snappier. Like even just the booting up was much faster? Perhaps it gave a more uptodate drive in the Android-ROM?

-SMS works.
-MMS does not.
-Calling can be made but the other person cannot hear me but I may hear them.
-Typing was alittle off perhaps just needs screen calibration.
-Obviously there was no sound but all the Audio programs worked(minus the sound XD)
-Booted up 3 times flawlessly.
-The main lag was when using the "search" function.

cannot wait to get Sounds :p and data/wifi.
 

oppaunke

Senior Member
Apr 17, 2005
83
0
Finally some serious action in here :)
To all developers: You do a great job !!!

As others have written previously, the "Donut" Release is working pretty good for this more or less pre-alpha stage. I'm really excited about the fluent interface.


greetz
oppa (alex)
 

amelsen

Member
Nov 23, 2009
12
0
Sorry for invading this thread since I don't have a TD2...

I'm just curious if one of the developers here perhaps could say if there is a chance this package potentially also could bring android to the touch pro 2? I've been following a thread over there, but there doesn't seem to be any real progress made there?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 13
    Updated Bundles and EXT2

    New and updated bundles and system.ext2 for your enjoyment! Bundles are noob freindly, just extract bundles to sdcard and run haret.exe in the andboot folder from winmo. Bundles have the latest rootfs, zimage and modules, and latest system.ext2 i made from xdandroid git.:p

    Froyo Bundle
    http://www.mediafire.com/?i12lbj2t3ixh7cg
    Froyo System.ext2
    http://www.mediafire.com/?995kqe7294az86g
    Gingerbread Bundle
    http://www.mediafire.com/?m9jxqwsbr36cexd
    Gingerbread System.ext2
    http://www.mediafire.com/?47ulbvd9bacwdof
    9
    To inform all that there are some breakthrough on camera and some fixes on battery drain, so expect in following days/weeks all of that working ;) and after that we could hopefully go on nand development ;)

    P.S.: And gingerbread is going also well so expect that too
    9
    Updated package

    Due to glemsoms autobuild service being offline, here an updated build as attachment. Usable for any of our devices. Diam, Raph, Kovs, Black, Rhod and Topa.

    Included is this commit.

    Have fun.
    Michael
    7
    Xdandroid bundles

    Hey everyone! For all you noobs to xdandroid out there, here are some links to 100% noob friendly bundles! These were made from Xdandroid source repositories that I synced and compiled today. These bundles have the latest Rootfs, Zimage and modules, and system.ext2 files, as well as startup.txt and tscalibration for Topaz devices (will work with other supported devices with different startup.txt and tscalibration) All you have to do is extract the file to sdcard, then run haret.exe in /andboot folder. That is it, Enjoy!

    Froyo Bundle: (FRX05-2.2.2 with camera)
    http://www.mediafire.com/?ek8lce5c3mlsr54

    Gingerbread Bundle (2.3.3 with Camera)
    http://www.mediafire.com/?cmqrltml8h7skfk
    6
    How to install Fx04

    Hello guys!

    I'm having a little hard time understanding all the steps of installing the newest XDAndroid. I have done this once and now I've forgotten it, and since I did there are som new versions out and I want to test the latets FRX04. And there are so many pages in this thread now and I'm not totally getting the step-by-stepguide thanks to my English reading level.

    So, I want to do a complete new install of android, format my card and then do it fresh. But what packages should I download? I just know about the kernel, rootfs and system, but what about all the other "system files?". I just dont get it and I have tried to look around in all the threads now. I would appreciate a complete step-by-step-guide :)

    Thanks!

    Its simple, here's how you install,

    1) first get the bundle package from the first page- September 17th 2010 Build Froyo 2.2

    http://htcandroid.xland.cz/XDANDROID.2.2.AOSP.FRX01.17.09.10.UPDATE_PACKAGE.7z

    2) then get System package - FRX04 Final NEW:

    http://files.xdandroid.com/system-FRX04.ext2.zip

    unzip both folders , and copy the system.ext2 from the fx04 folder to
    the bundle package folder, overwrite the file.

    3) get the latest root file from this link -
    http://files.xdandroid.com/rootfs/ i.e. rootfs-20110123-5cafe3f.zip Jan 23

    -rename the file, rootfs-20110123-5cafe3f.img to just rootfs.img
    -copy and overwrite the rootfs file in your bundle folder, it should be named andboot.

    4) Get the latest available version from this link -
    http://files.xdandroid.com/initramfs/
    i.e. initrd-20100813-b11116a.gz

    5) download the latest kernel from this link-
    http://xdaforums.com/showthread.php?t=869992

    Latest Kernel
    Commit# 1253
    Kernel: zImage-2.6.27.46-01253-gd53ddf6
    http://www.mediafire.com/?u7i17okoxz2u96y

    rename the zImage-2.6.27.46-01253-gd53ddf6 to just zimage and overwrite the zimage file in your andboot folder.

    Modules: modules-2.6.27.46-01253-gd53ddf6.tar.gz
    http://www.mediafire.com/?pdaequm74tmoday

    delete these from your andboot folder and copy the one you downloaded, the newer one.

    The structure of your andboot should be somewhat given below-:D



    /Storage Card/ or /sdcard/andboot

    /AndroidApps/
    /conf/
    /media/
    /STARTUP CONFIG/
    /startup.txt
    (you will get this file from your startup folder, if your device is topaz get that)
    set ramsize 0x10000000
    set ramaddr 0x10000000
    set mtype 2293
    set KERNEL zImage
    set initrd initrd.gz
    set cmdline "lcd.density=240 pmem.extra=1 msmvkeyb_toggle=off msmts_calib=0x395.0x3d5.0x79.0xa0 sensor=topaz gsensor_axis=2,1,3 pm.sleep_mode=2 rel_path=andboot"
    boot
    /haret.exe
    /initrd.gz
    /rootfs.img
    /system.ex2
    /zImage

    Running Android:

    Browse to your storage card and open/run the file Haret.exe
    On the first boot android will ask you to tap 5 white dots for touchscreen calibration
    Wait for Android to be completely up and running


    After you have logged in explore and set your options and creation of your data.img would take some time, and confirm if you have the wifi error.

    give your feedback

    hope it helps.