How long have you used these? I bought the 7 pack about a month ago and am already on the 4th one. If you have your phone in your pocket often they will just fall off and then you can't put them back on.
Found the best screen protectors for HTC Sensation !!!
- Thread starter AZ2ENVY
- Start date
-
- Tags
- accessories
Well, I tried to fit one of these on Friday. I went through 3 just to get one to sit properly and not have air bubbles in the corners even after 5 minutes under the hair drier! I've picked my phone up off the shelf this morning and guess what... The corners have air pockets full of pocket lint!!!
HOW HARD CAN IT BE TO TRACE A SCREEN AND MAKE A PROTECTOR THAT ACTUALLY FITS AND WORKS!!! these are the third set of screen "protectors" I've tried that don't work!
HOW HARD CAN IT BE TO TRACE A SCREEN AND MAKE A PROTECTOR THAT ACTUALLY FITS AND WORKS!!! these are the third set of screen "protectors" I've tried that don't work!
Got mine 5 pack
First one (cold) didnt stick so ruined it
Second heated up real hot. Stick alright but after 10 min the corners have little bubbles
First one (cold) didnt stick so ruined it
Second heated up real hot. Stick alright but after 10 min the corners have little bubbles
I ordered mine @ 25/02 but have yet to receive it 
perhaps due to I'm living in a 3rd world country...
perhaps due to I'm living in a 3rd world country...
Received the item today, but there are a lot of air bubbles in the corners. How can I remove this bubbles???
I haven't been using a screen protector because I haven't found any that fit well. These were well worth it, cheap and they fit. I don't like the feel of them so much but its not a big deal. Overall, I'm happy with these.
Sent from my HTC Sensation 4G using xda premium
Sent from my HTC Sensation 4G using xda premium
personally, i've not had good success applying these without using wet method. dry, i seem to get a piece of dust trapped. good thing about wet method is that dust does not remain on the film as you apply it.
In fact after a failed dry installation, i just used the same protector and tried with wet method. the dust came off the film into the soap solution. you need to be persistent with the working out air bubbles but eventually the film will stay.
In fact after a failed dry installation, i just used the same protector and tried with wet method. the dust came off the film into the soap solution. you need to be persistent with the working out air bubbles but eventually the film will stay.
Right now I am using the one that come with the otterbox. Its tick, but its just for the screen portion, its not for the whole front. I hate that.
I just ordered this, and it should be in Macedonia in something like 20 days. It usually takes that much. I'll tell you how I like them.
I just ordered this, and it should be in Macedonia in something like 20 days. It usually takes that much. I'll tell you how I like them.
I removed my screen protector after remembering that the sensation's screen is a gorilla glass.
Dunno why we are are using screen protectors when its a gorilla glass. I understand if its like a fingerprint resistant but if its a clear gloss I duuno why.
I actually drop my phone on the pavement screen down, it didnt even scratched the screen but the metal frame got marked and a dent :\
Sent from revolutionized HTC Sensation ICS
Dunno why we are are using screen protectors when its a gorilla glass. I understand if its like a fingerprint resistant but if its a clear gloss I duuno why.
I actually drop my phone on the pavement screen down, it didnt even scratched the screen but the metal frame got marked and a dent :\
Sent from revolutionized HTC Sensation ICS
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
58Okay Ive wasted alot of money of different styles of screen protectors
for the Sensation . Its a common ritual for me with new phones though .
I look for best fit , clarity , soft feel , and style . With the Sensations
screen being curved its a pain to find the one that fits all of these
requirements successfully . But as of today I found a worthy screen
protector . So I thought I would share and direct you guys towards
them First is the eBay link where you can get these exact ones .
Then here is the pics of them installed on my S4g Please hit the
Thanks button if I helped ! Enjoy ...
***Updated Link 4/24/12***
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=270961808166#ht_2116wt_1163
Tools needed :
Hair Dryer
Microfiber towel or lint free extremely soft towel
Dust free area
Credit card or something alike with nice edges and not scuffed , chipped
Installation tips :
1: Make sure the area is dust free , I prefer the bathroom .
2: Sit the phone on something soft and lint free
3: Make sure the screen is absolutely free of fingerprints,lint,etc.
4: Heat up the screen protector with the hair dryer so its hot to the
touch (DO NOT HEAT PHONE !)
5: Peel off #1 side of protector
6: Apply carefully to screen so all edges are symmetrical in placement
Here is where I do things different.....
7: Rub the protector onto the phone , You will notice only the center
section sticks down and a large portion of the sides and top where
the beveled edges are will not stay stuck down . This is fine just rub
so you can get as much to stick as possible .
8: Peel off #2 side of protector , be careful to NOT peel off actual screen
protector when doing this since the edges are not stuck down .
9: Rub the protector on the phone with your fingers and credit card or
whatever you chose to lay edges down and get air bubbles out . You
will notice that the protector is very pliable now and will cooperate
very nicely !
10: Post pics for everyone to see
11: Enjoy !2Tools needed :
Hair Dryer
Microfiber towel or lint free extremely soft towel
Dust free area
Credit card or something alike with nice edges and not scuffed , chipped
Installation tips :
1: Make sure the area is dust free , I prefer the bathroom .
2: Sit the phone on something soft and lint free
3: Make sure the screen is absolutely free of fingerprints,lint,etc.
4: Heat up the screen protector with the hair dryer so its hot to the
touch (DO NOT HEAT PHONE !)
5: Peel off #1 side of protector
6: Apply carefully to screen so all edges are symmetrical in placement
Here is where I do things different.....
7: Rub the protector onto the phone , You will notice only the center
section sticks down and a large portion of the sides and top where
the beveled edges are will not stay stuck down . This is fine just rub
so you can get as much to stick as possible .
8: Peel off #2 side of protector , be careful to NOT peel off actual screen
protector when doing this since the edges are not stuck down .
9: Rub the protector on the phone with your fingers and credit card or
whatever you chose to lay edges down and get air bubbles out . You
will notice that the protector is very pliable now and will cooperate
very nicely !
10: Post pics for everyone to see
11: Enjoy !2
They are very durable . very scratch resistant . Soft to the touch and
very smooth . Fingerprint resistant
Please?
Thank you for having manners The 5th one is missing because its on my phone . (Just thought I would cover
my ass since people love to tear others apart here)
