[KERNEL][4.4.4]F(X)TrinityUltimateKernel-V3.2 - MultiBoot - IntelliV2_ LUpdate Of Feb

V2.5 TrinityUltimate Kernel Changelog :

• DT2W With DeepSleep Now!
• Added New GPU Optimization

Default GPU Governor For Battery Saving Is : Simple_Ondemand
Gaming Governor - msm_adreno-tz = You need to set it manually using Faux App or PimpMyZ1

This Version will have 98% Chance Of GPU Improvement.

To Be Added Soon! New Sony Sensor. Like RAW JPEG.
And Modded DT2W..

Hope you like my Birthday Present! Thanks This is only One Version Since it's Fixed. But Future version the Touchpad will be modded. With the base tip. of Xperia Z2 DT2W or Xperia Z.

This Fix is From. nikhiljan93 But, I need to mod the TouchPad for better wakeup.

Im back, Going to Have major Upgrade for ROM and Kernel . MultiBoot. Gonna Add it

I Have been Busy Studying VB.NET and PHP

Recommended Settings ( BELOW ) & CM Support ( SOON )


Kernel Configuration #1
Thanks To @Wolfbreak for sharing his Config.
ROM: TrinityVengeanceRaptorX™ HD 1.4
Kernel: F(X)TrinityUltimateKernel-V2.7B

CPU Clocks
Max Clock: 2265600
Min Clock: 300000
Governor: intelliactive or PegasusQ [PegasusQ with MPDecision only]
Snake Charmer: On

I use intelliactive + intelliplug Combination but PegasusQ + MPDecision is a very good Combination too so test it out and choose which one you prefer.

CPU Hotplug
intelliactive
Hotplug Driver: intelliplug
Intelliplug Control - Touch Boost: On
Screen-Off Frequency: Off
Hysterisis Value: 8
Intelliplug Profile: Eco Conservative
Threshold Value: 722

CPU Hotplug for PegasusQ
Hotplug Driver: MPDecision

CPU Idle Stats
C0 - WFI: On
C1 - Retention: On
C2 - Standalone_Pc: On
C3 - PC: On

Thermal Manager
Thermal Managment Driver: IntelliThermal
Frequency Throttle Temperature: 85
Core Throttle Temperature: 80
Frequency Throttling Cores:
Core0 - On, Core1 - On, Core2 - On, Core3 - On
Core Throttling Cores:
Core0 - Off, Core1 - On, Core2 - On, Core3 - On

GPU Manager
GPU Governor: simple_ondemand
GPU Clock Control: 450 Mhz
Simple GPU Algorithm: On
Simple Governor - Laziness: 4
Simple Governor - Ramp Threshold: 7

IO Scheduler
FIOPS for eMMC and SDCard, Readahead Size: 512
eMMC / SDCard Entropy Contribution: Off

Color / Gamma
Color Temperature: Red - 255, Green - 235, Blue - 250
OBS! Set those values under Settings > Screen / Display > White Balance:
Red - 0, Green - 25, Blue - 25

Memory Manager
ZRAM Controls: Off
Clear VFS Cache After Boot: On
Auto FS Writeback Delay Mode: On
Swappiness: Change 80
VFS Cache Pressure: 100
Dirty Ratio: 20
Dirty Background Ratio: 5

Same Page Merge
Intelli-KSM Enable: On
Activation Threshold: 36 megabytes
Cycles per activation: 3 cycles
Pages to Scan: 400 pages
Scan Delay Interval: 500 ms

Battery Controls
Battery Temperature Throttling: On
Battery Temperature Threshold: 45 Celsius
Battery Throttle CPU Frequency: 1190400
FastCharge Options: Custom [Optional]
AC Charge Current (mA): 1500 [Optional]

Miscellaneous
PowerSuspend Modes: Hybrid
PowerSuspend: On
Dynamic File Sync: On
TCP Congestion Control: Westwood

If you cant set PowerSuspend then activate Userspace Mode check PowerSuspend and activate Hybrid again after that and both should be on and work.

--------------------------------------------------
--------------------------------------------------
--------------------------------------------------

Kernel Configuration #2 [/U]
Thanks To F(X)THaxxorX ( ME ) for sharing his Config.
ROM: TrinityVengeanceRaptorX™ HD 1.4
Kernel: F(X)TrinityUltimateKernel-V2.7B

CPU Clocks
Max Clock: 2.266 Ghz
Min Clock: 422 Mhz
Governor: OndemandPlus
Snake Charmer: On ( DEFAULT )

CPU Hotplug
Mpdecision
TouchBoost = Off
# Enables two core touch boost
sys.somc.touch_perf_kick=0

CPU Idle Stats
C0 - WFI: Off
C1 - Retention: Off
C2 - Standalone_Pc: Off
C3 - PC: Off

Thermal Manager
Thermal Managment Driver: Thermald

GPU Manager
GPU Governor: userspace
GPU Clock Control: 450 Mhz
Simple GPU Algorithm: On
Simple Governor - Laziness: 4
Simple Governor - Ramp Threshold: 5

IO Scheduler
FIOPS for eMMC and SDCard, Readahead Size: 1536
eMMC / SDCard Entropy Contribution: On

Color / Gamma
N/A -- Off

Memory Manager
ZRAM Controls: Off
Clear VFS Cache After Boot: Off
Auto FS Writeback Delay Mode: Off
Swappiness: Change 45
VFS Cache Pressure: 100
Dirty Ratio: 17
Dirty Background Ratio: 15

Same Page Merge
Intelli-KSM Enable: On
Activation Threshold: 25megabytes
Cycles per activation: 5 cycles
Pages to Scan: 256 pages
Scan Delay Interval: 465 ms

Battery Controls
Battery Temperature Throttling: On
Battery Temperature Threshold: 40 Celsius
Battery Throttle CPU Frequency: 1036800
FastCharge Options: Force AC[Optional]
AC Charge Current (mA): 500[Optional]

Miscellaneous
PowerSuspend Modes: Userspace
PowerSuspend: On - Force Enabled By Userspace Option
Dynamic File Sync: On
TCP Congestion Control: BIC

V2.6_EXT4

2.6 Is Uploading Right Now! . [( UPLOADED )]
Enjoy! My Work!

• Upstream Update From 3.4.0 to 3.4.9 Upstream
• WiFi And exFAT Works! Kernel Version is Updated!
• And Many more! - To be Added.
• HTC AFSync
• Taiko Sound Boost
• Added PegasusQ
• Added Adaptive
• Added frontswap v16
• Added abyssplug
• Added New CpuFreq Driver
• Added F2FS File System Support***
• Updated ZRAM
• Adaption Of HR_TIMER for 3.4
• sparc64 Misc Patches.
• ASoC: wcd9xxx: Enable headset in high performance
• Fully WORKING exFAT AND WiFi - You Can see the proof because 3.4.0 is changed to 3.4.X

F2FS - I Need To Compile Ramdisk, This will be Good when internet is fixed already .

If You Got Fast Net Right now, You can Compile TWRP with F2FS Support and Change /data and /cache and /system You can see many Guides on adding F2FS Support on Ramdisk if you don't know. And F2FS Support is Enabled In The Main Kernel.

You Can Buy me A Beer
Send Donation Via PayPal : mico.anonuevo18@gmail.com