[Update] SP Tool flash JB v1.11 Stock Micromax Official

Search This thread

chemicalrage

Senior Member
Oct 17, 2011
1,220
763
I have a good internet connection and hence I decided to mirror the 10 files to 1 rar file for others to download.

Credits:

Micromax for releasing the Update
paplu3 for sharing it first to the XDA members.

Download Links:

Jellybean Update (v1.11) - Click Here!

[ File md5 = 67801d68a7e4fffd97af37020681de9d ]

Flash Tool - Click here!

[ File md5 = a26bbed7fa736e3c78111a31de43be0d ]


Changelog:

Code:
Software release notes:
1. Operating system is upgraded from ICS to Jelly bean.
2. M! Store is removed.
3. New wallpapers are integrated.
4. Software is backward compatible with old TP available(BYD Make).
5. Power on animation is changed.

Hardware release notes:
1.TP is changed from BYD to BAOMING.

Tutorial on flashing:

You should have installed the drivers already. If you don’t have, download from here – http://www.mediafire.com/?za0d99312v4gh

Run Flash Tool as Admin.(Right click > Run as Admin)
Go to Scatter-Loading file and select the scatter file found in the ROM folder.
Now connect your Micromax A110 to the PC. It should be turned on.
Now turn it off (while its connected to the PC) and wait for 3 seconds.
Click "Download". Wait 5 minutes. Don't touch your phone. Once its done, remove USB. Reboot phone .

Note: Do not connect it when its already turned off. It wont flash the update because your phone will be charging in another mode. So you HAVE TO connect the phone via USB while its in ON state and then turn it off.

------------------------------------------------------------------------------------------------------------------------------------
 
Last edited:

abhishe11sharma

Senior Member
Dec 20, 2012
94
12
Jaipur
I have a good internet connection and hence I decided to mirror the 10 files to 1 rar file for others to download.

Credits:

Micromax for releasing the Update
paplu3 for sharing it first to the XDA members.

Download Link:

Jellybean Update (v1.11) - Click Here!

[ File md5 = 67801d68a7e4fffd97af37020681de9d ]

Flash Tool - Click here!

[ File md5 = a26bbed7fa736e3c78111a31de43be0d ]


Changelog:

Code:
Software release notes:
1. Operating system is upgraded from ICS to Jelly bean.
2. M! Store is removed.
3. New wallpapers are integrated.
4. Software is backward compatible with old TP available(BYD Make).
5. Power on animation is changed.

Hardware release notes:
1.TP is changed from BYD to BAOMING.

Tutorial on flashing:

You should have installed the drivers already. If you don’t have, download from here – http://www.mediafire.com/?za0d99312v4gh

Run Flash Tool as Admin.(Right click > Run as Admin)
Go to Scatter-Loading file and select the scatter file found in the ROM folder.
Now connect your Micromax A110 to the PC. It should be turned on.
Now turn it off (while its connected to the PC) and wait for 3 seconds.
Click "Download". Wait 5 minutes. Don't touch your phone. Once its done, remove USB. Reboot phone .

Note: Do not connect it when its already turned off. It wont flash the update because your phone will be charging in another mode. So you HAVE TO connect the phone via USB while its in ON state and then turn it off.

------------------------------------------------------------------------------------------------------------------------------------
thanks +1
 

WildSDI

Senior Member
Oct 21, 2012
59
0
Flash tool and drivers not downloading.
Mediafire not working.
Please upload in alternate servers.
 

ish639

Member
Mar 15, 2013
27
0
download?
seems like i would need an alternate internet connection such as wifi to download the files.
its size would be around 290 mb...is it?
 

hisee

Senior Member
Oct 29, 2010
3,114
247
MUMBAI
what to press download or f\w upgrde as i saw video it showing press f\w upgrde
can any one confirm it
i am on ics
 

udyansh5338

Senior Member
Mar 22, 2013
126
12
I have a good internet connection and hence I decided to mirror the 10 files to 1 rar file for others to download.

Credits:

Micromax for releasing the Update
paplu3 for sharing it first to the XDA members.

Download Link:

Jellybean Update (v1.11) - Click Here!

[ File md5 = 67801d68a7e4fffd97af37020681de9d ]

Flash Tool - Click here!

[ File md5 = a26bbed7fa736e3c78111a31de43be0d ]


Changelog:

Code:
Software release notes:
1. Operating system is upgraded from ICS to Jelly bean.
2. M! Store is removed.
3. New wallpapers are integrated.
4. Software is backward compatible with old TP available(BYD Make).
5. Power on animation is changed.

Hardware release notes:
1.TP is changed from BYD to BAOMING.

Tutorial on flashing:

You should have installed the drivers already. If you don’t have, download from here – http://www.mediafire.com/?za0d99312v4gh

Run Flash Tool as Admin.(Right click > Run as Admin)
Go to Scatter-Loading file and select the scatter file found in the ROM folder.
Now connect your Micromax A110 to the PC. It should be turned on.
Now turn it off (while its connected to the PC) and wait for 3 seconds.
Click "Download". Wait 5 minutes. Don't touch your phone. Once its done, remove USB. Reboot phone .

Note: Do not connect it when its already turned off. It wont flash the update because your phone will be charging in another mode. So you HAVE TO connect the phone via USB while its in ON state and then turn it off.

------------------------------------------------------------------------------------------------------------------------------------

bro i installed suvi rom but now i want to remove it and want to official jb rom again over it...how can i....??? can i do it by same cwm recovery method????

Sent from my Micromax A110 using xda app-developers app
 

imran_inamdar

New member
Apr 2, 2013
3
0
Run Flash Tool as Admin.(Right click > Run as Admin)
Go to Scatter-Loading file and select the scatter file found in the ROM folder.
Now connect your Micromax A110 to the PC. It should be turned on.
Now turn it off (while its connected to the PC) and wait for 3 seconds.
Click "Download". Wait 5 minutes. Don't touch your phone. Once its done, remove USB. Reboot phone .

Note: Do not connect it when its already turned off. It wont flash the update because your phone will be charging in another mode. So you HAVE TO connect the phone via USB while its in ON state and then turn it off.

------------------------------------------------------------------------------------------------------------------------------------[/QUOTE]

Where I Can Find ROM folder ??????????
 

ish639

Member
Mar 15, 2013
27
0
what to press download or f\w upgrde as i saw video it showing press f\w upgrde
can any one confirm it
i am on ics


bro...if u are directly downloading the JB rom to your device, as mentioned in the tutorial, then u have to press download button.

but if u have already downloaded the stock rom and want to install it, press firmware upgrade
 

Top Liked Posts

  • There are no posts matching your filters.
  • 9
    I have a good internet connection and hence I decided to mirror the 10 files to 1 rar file for others to download.

    Credits:

    Micromax for releasing the Update
    paplu3 for sharing it first to the XDA members.

    Download Links:

    Jellybean Update (v1.11) - Click Here!

    [ File md5 = 67801d68a7e4fffd97af37020681de9d ]

    Flash Tool - Click here!

    [ File md5 = a26bbed7fa736e3c78111a31de43be0d ]


    Changelog:

    Code:
    Software release notes:
    1. Operating system is upgraded from ICS to Jelly bean.
    2. M! Store is removed.
    3. New wallpapers are integrated.
    4. Software is backward compatible with old TP available(BYD Make).
    5. Power on animation is changed.
    
    Hardware release notes:
    1.TP is changed from BYD to BAOMING.

    Tutorial on flashing:

    You should have installed the drivers already. If you don’t have, download from here – http://www.mediafire.com/?za0d99312v4gh

    Run Flash Tool as Admin.(Right click > Run as Admin)
    Go to Scatter-Loading file and select the scatter file found in the ROM folder.
    Now connect your Micromax A110 to the PC. It should be turned on.
    Now turn it off (while its connected to the PC) and wait for 3 seconds.
    Click "Download". Wait 5 minutes. Don't touch your phone. Once its done, remove USB. Reboot phone .

    Note: Do not connect it when its already turned off. It wont flash the update because your phone will be charging in another mode. So you HAVE TO connect the phone via USB while its in ON state and then turn it off.

    ------------------------------------------------------------------------------------------------------------------------------------
    1
    It is better you flash with SP tool.