[Q] Please help identifying tablet

2016 UPDATE:

I HAVE IDENTIFIED IT MYSELF: The Mainboard is T733-MAINBOARD-V2.1

Firmware can be downloaded from here:
http://www.needrom.com/download/a13-chipset-t733-mainboard-v2-1-dual-sim-fully-working-and-tested/comment-page-3/#comments

LiveSuite from here:

https://androidmtk.com/download-livesuit-all-versions

Flashing guide here:
https://androidmtk.com/flash-stock-rom-using-livesuit

You will need to install the following first:
1. http://universaladbdriver.com/wp-content/uploads/universaladbdriver_v3.0.zip

2. https://androiddatahost.com/wp-content/uploads/15_Second_ADB_Installer_v1.4.3.zip

After reflash, you will need to install Play store, because Android market cannot connect.
Google Play store from here:
http://www.apkmirror.com/apk/google-inc/google-play-store/

I'm still looking for recovery.


--------------------------------------------------------------

Hi all, Could you help me identifying a chinese/korean tablet and help getting a custom recovery onto it.

The tablet is bought here in the Philippines as SAMSUNG GALAXY Tab 3, I got it from my GF who swapped her old phone in a market in Manila, for this one - Seller claimed original(as usual).

Model
FCC ID: A3LGTP1000 RATED: 5V=2A
MADE IN KOREA

CE0168

Se photos below

I used SpecDevice to pull all the info I could of the tablet and its in the provided link - I can't post it here or the thread will be too large, so please follow the link http://specdevice.com/showspec.php?id=f475-9a5c-3a0b-df1d2dfafbec

Now, I know this tablet is NOT original SAMSUNG Tab 3, I have been living in the Philippines long enough to know a fake when I see one - but its damn good copy - Except for a few things:

It has:

Boxchip Allwinner A13 Singlecore 1Ghz
512MB Ram
Storage according to the Partition table APP:
/system: 504MB(463MB used),
/data: 1008MB(494MB used),
/cache: 315MB(5MB used),
/mnt/extsd: 30021(8772MB used) - this is the external SD card of 32MB,
/mnt/sdcard: 1401(172MB used)

adding the storage space up gives 3228MB which would mean this tab has approx. 4GB Rom. According to seller it should have 8GB(so again something fake). In settings>storage it says:

INTERNAL STORAGE:

Total space: 0.98GB - Apps:440MB - Available: 503MB
------------------------------------------------

Then something strange

INTERNAL STORAGE

Total space: 5.63GB - Apps: 110MB - Pictures, videos: 3.40MB - Audio: 3.22MB - Downloads: 1.15MB - Available: 5.48GB
--------------------------------------------------------

And strange again

EXTSD

Total space: 5.63GB - Available: 5.48GB
--------------------------------------------------------

I think this info is from the buildprop and that its fake, but I'm no expert in tablets - so need your help on this one - how to set it correctly?

------------------------------------------------------------------------------------------------------------------------------

Something else, this one comes with ICS installed, and in About tablet it says android version 4.2.1 - all that is written on the SpecDevice page, just follow the link above.


What I need from you Guys/Galls is a way to identify this tablet and get help to put custom recovery on it, either CWM or TWRP.

It has stock recovery but it can only be accessed by Settings>Backup and reset> Reboot to recovery - If I try the Power and Vol+ I get tilted green android with red exclamation mark, and I have tried all combinations of buttons that I could find on the net. I need custom recovery before I start modifying it, or there is no way to reflash it, if something goes wrong - Please help me with this

Cpu Identifier(By Davy Bartoloni) tells me this:

Cpu type: Boxchip Allwinner A13
Tablet type: T733 (Allwinner)

More info: Screen size 7.0 Inches
Supported frequency states: 29
NEON capable (fast video playback)
Ram memory module: 512 Mb DDR (Usable 353 Mb)

GPU type:
Mali-400 MP (single core GPU)
By ARM Holdings plc / ARM Norway

Going to the page for GPU:
Real inches: 7.0"
GPU: Mali-400 MP
Dispaly size: 800 x 480 (Normal)
X/Y dpi: 160 / 160 density: 160
Software inches: 5.00"
enlargement ratio: 1.4
GPU display stress factor: 1.95 (normal to manage)


Going to android device page:
Device: T733
Declared PCB: nuclear
Compiled for:
Product: nuclear_evb
Code name: nuclear-evb
OS version: 4.2.1(Jelly Bean)
Battery level: 98%
Flash memory: 1,007 MB
free flash memory: 502 MB
battery temperature: 30.0 C
Kernel compiled on 'gtide' workstation by user: fwj (build 20130627)


Going to Bogomips page:
Processor: ARMv7 Processor rev. 2 (v7I)
Bogomips: 1001.88
CPU implementer: 0x41
CPU Architecture: 7
CPU variant: 0x3
CPU part: 0xc08
Cpu revision: 2
Hardware: sun5i
Revision: a13b
Serial: this is very long and I don't know if you guys need it

EDIT: Some immidiate problems I could use some help with, the screen size is 800x480 but when in ES file explorer I can't see the full text of pop-up boxes, and have to turn the tablet upside down in order to catch a glimpse of OK or other buttons(to the right). Kind of annoying when having to set /system to R/W.
I think it has to do with the screen itself being 7" but widescreen style, and its not set correctly somewhere. As you can see above in CPU identifier, it says its "software inches: 5.00".

Just found out the screen is 800 x 432 and not 800 x 480 - that could explain why ES File explorer have a problem.

I used this tool: https://play.google.com/store/apps/details?id=com.sturnus.screeninfo

And this tool https://play.google.com/store/apps/details?id=com.xizz.resolutioninfo which told me that the screen is actually not 7" nor 5.8" as SpecDevice said, but in reality 5.7".

Now, somewhere in the system files something is written wrong - how do I fix it?

This is starting to be a very long thread, so if there is any other info you guys need then just ask

Hope you can help me

With kind regards

JBJ
EDIT: The tablet is pre-rooted, it just needed me to install SuperSU and busybox(Stericsson).

es0tericcha0s said:

Maybe you can find something here: http://ublaze.ru/forum/topic1232-1860.html It's in Russian, so you'll need something like Google Translate, but seems like a pretty decent list of Allwinner stuff.

Click to expand...

Click to collapse

Thanx for the quick reply, and the link - unfortunately google translate is horrible to translate from russian to english and I also think we should stay in this thread, so others can find benefit of this - there are alot of theese tabs sold here in the Philippines - but no support.

Please take a look at the EDIT's I made

With kind regards

JBJ

Hi again, I figured something is wrong with my build.prop or platform.xml so I have attached them here, plus lsmod transcript. In the build.prop there is no line to change the LCD density or resolution.

Could someone take a look at it - please

Remember this is IMM76D ICS version 4.0.4 release 4.2.1(thats what it says), maybe thats why - but what do I know, I'm no expert

Thanx in advance

JBJ

ehh, what do you mean by 2nd post? Also, I said that I like to stay in this forum as it would make it easier to someone else who has same tablet - please do that And post any info here;

There are enough trouble finding info scattered across many forums, with links to other forums, that again has links to other forums - this makes it extremely difficult for newbies to find info - I hope you understand my point, and want to continue the help

thanx in advance

JBJ

SavvasPro said:

Clearly, what do you ask for? :what:

Hope I helped you!
If I did , then why not press that Thanks button under my post...

Click to expand...

Click to collapse

Hi, Please read all post since I ask for help identifying and for help with display problem

Thanks for the link, but these tools rarely do something new, they just copy the functions of eachother - basicaslly all the same except for the name. They cannot tell you who is the manufacturer, they can only list what is wriiten in build.prop.

With kind regards

JBJ

2 days until I have to return to Denmark, I really don't want to

BoomPork said:

do you have the firmware of this?sorry for making it not related to the topic but this is same as my tablet i think, i want the firmware of your tablet, i also live in philippines (tropa sige na kung pwede sana iprovide mo yung link ng firmware nyan) thankyou hoping for your response.

PS:
make it flashable to livesuit cause some of later 2012-2013 img files are not, most of them i got error like 0x162 or maybe because of installing cwm or anything modification i made make that img file got the error 0x162. thankyou

Click to expand...

Click to collapse

Hi, I don't have the firmware, but i might be able to make a firmware/Rom dump using uberizer - if you then can make the IMG file yourself. But I don't have any storage apace to upload it too. Also I don't have time to look at this now, but will get back to you later on.

With kind regards

JBJ
Its, Insomniacno1 = sleepless maniac