[Recovery] ClockworkMod v4.0.1.4 (with offmode charging/advanced backup)
- Thread starter arco68
- Start date
it's strange because in this thread says this is introduced with 3.0.2.4
I see the menu looks different and there's WIPE ALL added but other than that I'm still curious about the advanced "advanced restore"
It's not advanced restore, its advanced backup. Now you can backup single partitions.
It worked
Thanks "doomed151" for the "unrevoked 3.14"
Worked great.
(after the second time, forgot to use custom image)
So here's how i did it, so other ppl will not have to run unrevoked 2 times cause they forgot to include the custom recovery image.
01. Be sur you know how to root your device
02. Be sure you have a PC with everything on it you need (drivers etc...)
03. Else follow this guide:
http://xdaforums.com/showthread.php?t=788776
04. Follow this but DON'T connect your Wildfire to the pc yet
05. Start "unrevoked v3.14"
06. Press "File"
07. Choose "Custom Recovery"
08. Browse to the place where you unpacked the zip and look for "recovery.img"
09. Keep unrevoked open
10. Connect your Wildfire to your PC
11. Let Unrevoked do it's stuff, it will reboot your wildfire into normal recovery and reboot again into the new "custom clockworkmod 3.0.2.8"
12. Disconnect Wildfire and do your stuff you need or reboot Wildfire.
UPDATE: You can install them by booting temporary into CWM recovery 2.5.x.x
Thanks "doomed151" for the "unrevoked 3.14"
Worked great.
(after the second time, forgot to use custom image)
So here's how i did it, so other ppl will not have to run unrevoked 2 times cause they forgot to include the custom recovery image.
01. Be sur you know how to root your device
02. Be sure you have a PC with everything on it you need (drivers etc...)
03. Else follow this guide:
http://xdaforums.com/showthread.php?t=788776
04. Follow this but DON'T connect your Wildfire to the pc yet
05. Start "unrevoked v3.14"
06. Press "File"
07. Choose "Custom Recovery"
08. Browse to the place where you unpacked the zip and look for "recovery.img"
09. Keep unrevoked open
10. Connect your Wildfire to your PC
11. Let Unrevoked do it's stuff, it will reboot your wildfire into normal recovery and reboot again into the new "custom clockworkmod 3.0.2.8"
12. Disconnect Wildfire and do your stuff you need or reboot Wildfire.
NOTE:
This also means you can't install some zips you normally flash through recovery like (for me):
- removeadw (removeadw.zip)
- MIUI Music Player (MiuiMusicENfixed.zip)
Those need to be updated and repacked into working update zip packages for ClockworkMod v3.x.x.x
(If anybody is willing to do this
UPDATE: You can install them by booting temporary into CWM recovery 2.5.x.x
Thanks doomed151 for that.
Last edited:
What you mean? I Have S-OFF after rooting first time with unrevoked 3.32. After flashing unrevoked 3.14 it's became S-ON
What you mean? I Have S-OFF after rooting first time with unrevoked 3.32. After flashing unrevoked 3.14 it's became S-ON
Can't be. There is some misunderstanding / mistake somewhere.
I couldn't get to work. It says failed to flash the recovery
Edit: Go it to work seems like this only works if we have CM7 installed ... I had WildPuzzle ROM installed ..
Edit: Go it to work seems like this only works if we have CM7 installed ... I had WildPuzzle ROM installed ..
Last edited:
Smashing work im well impressed flashed easy
Looking forward to future. Dev
Sent from my HTC Wildfire using XDA App
Looking forward to future. Dev
Sent from my HTC Wildfire using XDA App
I can't flash the latest radio. I tried using ROM Manager no go. Could someone post the latest radio with Edify script?
Try this. Boot into recovery and go apply sdcard/update.zip
It should flash 2.5.0.1 recovery temporarly, then flash your radio. Recovery will revert next time you reboot.
Sent from my HTC Wildfire using XDA App
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
31Hi all, here's a custom ClockworkMod recovery I've built, and are using personally. It has advanced backup and a wipe all function, which is useful for completely wiping the phone before flashing a new rom.
It also has support for offmode charging, so you can charge your phone while it's turned off. In addition to this, it fixes the old bug that you couldn't turn on the phone if it was turned off while it was charging.
3
Here you go a PC49IMG.zip which i created and it is workig fine for me
Put it on the root of your sd card and then go to bootloader and the phone will ask you do you want to install the update, then press the volume rockers up buton, then let it install and reboot your device afterwards.
Hope I helped
Cheers3It worked
Thanks "doomed151" for the "unrevoked 3.14"
Worked great.
(after the second time, forgot to use custom image)
So here's how i did it, so other ppl will not have to run unrevoked 2 times cause they forgot to include the custom recovery image.
01. Be sur you know how to root your device
02. Be sure you have a PC with everything on it you need (drivers etc...)
03. Else follow this guide:
http://xdaforums.com/showthread.php?t=788776
04. Follow this but DON'T connect your Wildfire to the pc yet
05. Start "unrevoked v3.14"
06. Press "File"
07. Choose "Custom Recovery"
08. Browse to the place where you unpacked the zip and look for "recovery.img"
09. Keep unrevoked open
10. Connect your Wildfire to your PC
11. Let Unrevoked do it's stuff, it will reboot your wildfire into normal recovery and reboot again into the new "custom clockworkmod 3.0.2.8"
12. Disconnect Wildfire and do your stuff you need or reboot Wildfire.
NOTE:
This also means you can't install some zips you normally flash through recovery like (for me):
- removeadw (removeadw.zip)
- MIUI Music Player (MiuiMusicENfixed.zip)
Those need to be updated and repacked into working update zip packages for ClockworkMod v3.x.x.x
(If anybody is willing to do this , thanks)
UPDATE: You can install them by booting temporary into CWM recovery 2.5.x.x
Thanks doomed151 for that.1Seems like unrevoked 3.32 failed at getting root (with both stock Froyo and CM7 RC3), tried out with 3.14 and what came out was a success.
Thanks!
Download unrevoked 3.14 here: http://puu.sh/1ngI/unrevoked_3.14.exe
