Good Evening.
I had issues with my Rooted 4.2.2 (knox enabled firmware) and i wanted to unroot and flash my phone back to the Stock non Rooted Firmware.
Im well aware I cant Downgrade to a stock firmware With no Knox..So What i am trying to do is to flash the Official non rooted
I9505XXUDMH6_I9505OXXDMH4_I9505XXUDMH6_HOME (EUR) firmware That my phone had before it got Soft-brick.
I get to errors from Odin When i am doing the recovery Process
1) I Got this:
There is not PIT partition Table
so Ive Used a .pit file From this http://xdaforums.com/showthread.php?t=2265477 Thread
and Ive retried the Process with CSB_signed_Fusion3_EUR_0325_V2.pit file But i got the Following Error:
2)
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMH6_I9505OXXDMH4_I9505XXUDMH6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
So I am Pretty Much At a dead end with not knowing what else to do I would appreciate if anyone can Help me With this Issue
Thank you in advance.
P.S
I am using Odin 3.07 or 3.09 and i get the same issues
my Knox_warrinty_void is at 0x1
My Phone Model is GT-9505 region unlocked
also I have tried every Usb Port on My computer and used 2 different Cables 1 from My S4 and 1 from my S1
Unfortunately i don't have access to a different computer atm, but the above Process is done to a fresh install of Windows 7 SP1 PRO (x64) Partition on my Current PC.
I had issues with my Rooted 4.2.2 (knox enabled firmware) and i wanted to unroot and flash my phone back to the Stock non Rooted Firmware.
Im well aware I cant Downgrade to a stock firmware With no Knox..So What i am trying to do is to flash the Official non rooted
I9505XXUDMH6_I9505OXXDMH4_I9505XXUDMH6_HOME (EUR) firmware That my phone had before it got Soft-brick.
I get to errors from Odin When i am doing the recovery Process
1) I Got this:
There is not PIT partition Table
so Ive Used a .pit file From this http://xdaforums.com/showthread.php?t=2265477 Thread
and Ive retried the Process with CSB_signed_Fusion3_EUR_0325_V2.pit file But i got the Following Error:
2)
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMH6_I9505OXXDMH4_I9505XXUDMH6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
So I am Pretty Much At a dead end with not knowing what else to do I would appreciate if anyone can Help me With this Issue
Thank you in advance.
P.S
I am using Odin 3.07 or 3.09 and i get the same issues
my Knox_warrinty_void is at 0x1
My Phone Model is GT-9505 region unlocked
also I have tried every Usb Port on My computer and used 2 different Cables 1 from My S4 and 1 from my S1
Unfortunately i don't have access to a different computer atm, but the above Process is done to a fresh install of Windows 7 SP1 PRO (x64) Partition on my Current PC.
Last edited: