Standard disclaimer applies for below mods, do it at your own risk. Always backup before you modify anything.
Deodex + Root:
Read the instructions carefully! Can only be flashed through CWM recovery
First, make sure you have CWM recovery installed. Then follow this steps carefully:
1.Download the file below and place it in the root of the SD card
2.Boot into recovery mode (CWM)
3.Wipe cache and dalvik cache (CWM)
4.Mount system before installation.
5.Navigate with the volume button, then choose install zip from sdcard
6.Choose zip from sdcard
7.Select the zip file you've downloaded and click yes
8.Wait till the installation complete then reboot your phone.
Note: First boot may take little longer than normal boot, hence please wait.
Download:
OS 2.3.4 S5830DDKQ6_Deodex_full @ 4shared.com (73 MB)
Overscroll Glow + Battery Mod + CRT Animation:
Note: If you have SAMSUNG (stock) bootanimation, then please use any custom boot animations before you install below mods. (Have look @ my signature for boot animations). Because this mod will erase SAMSUNG boot animation.
If you are using CF-ROOT, then you don't need to worry as CF-root already has custom boot animation.
1. Download attached file and unzip it
2. Use root explorer or similar app to move downloaded files to system/framework
3. Set permissions for both files appropriately to rw-r--r-- (644)
4. Reboot
Note: Boot may take little longer, don't panic just sit and relax.
Enable CRT Animation:
After completing above process, please follow these steps to enable CRT animation.
1. Long press build.prop from /system folder and open in text editor.
2. Modify this line
'debug.sf.hw=1' by adding # in front of debug, now it should look like mentioned below
'#debug.sf.hw=1'
3. Save and exit by pressing right soft key (this will backup your original build prop as build.prop.bak)
4. Reboot device
5. After reboot go to settings -> display -> animations and choose some or all animations.
Backlight Notification patch:
What is BackLightNotification?
The BackLightNotification mod converts the touchkey backlights into a notification led for sms, touchwiz email, gmail, gtalk and any other app which supports BLN.
For Calendar: Download "Calendar notifier" app from market
For Calls: Download "BLN control - Pro" app from market
1. Download attached file (Flash DDKQ6-services.zip)
2. Clear cache and dalvik cache
3. Flash through CWM
4. Reboot
Enjoy...!!!
Thanks to dhiru 1602 for overscroll glow source
Thanks to seilent for the overscroll glow tutorial
Thanks to ketut and neldar for the BLN
Deodex + Root:
Read the instructions carefully! Can only be flashed through CWM recovery
First, make sure you have CWM recovery installed. Then follow this steps carefully:
1.Download the file below and place it in the root of the SD card
2.Boot into recovery mode (CWM)
3.Wipe cache and dalvik cache (CWM)
4.Mount system before installation.
5.Navigate with the volume button, then choose install zip from sdcard
6.Choose zip from sdcard
7.Select the zip file you've downloaded and click yes
8.Wait till the installation complete then reboot your phone.
Note: First boot may take little longer than normal boot, hence please wait.
Download:
OS 2.3.4 S5830DDKQ6_Deodex_full @ 4shared.com (73 MB)
Overscroll Glow + Battery Mod + CRT Animation:
Note: If you have SAMSUNG (stock) bootanimation, then please use any custom boot animations before you install below mods. (Have look @ my signature for boot animations). Because this mod will erase SAMSUNG boot animation.
If you are using CF-ROOT, then you don't need to worry as CF-root already has custom boot animation.
1. Download attached file and unzip it
2. Use root explorer or similar app to move downloaded files to system/framework
3. Set permissions for both files appropriately to rw-r--r-- (644)
4. Reboot
Note: Boot may take little longer, don't panic just sit and relax.
Enable CRT Animation:
After completing above process, please follow these steps to enable CRT animation.
1. Long press build.prop from /system folder and open in text editor.
2. Modify this line
'debug.sf.hw=1' by adding # in front of debug, now it should look like mentioned below
'#debug.sf.hw=1'
3. Save and exit by pressing right soft key (this will backup your original build prop as build.prop.bak)
4. Reboot device
5. After reboot go to settings -> display -> animations and choose some or all animations.
Backlight Notification patch:
What is BackLightNotification?
The BackLightNotification mod converts the touchkey backlights into a notification led for sms, touchwiz email, gmail, gtalk and any other app which supports BLN.
For Calendar: Download "Calendar notifier" app from market
For Calls: Download "BLN control - Pro" app from market
1. Download attached file (Flash DDKQ6-services.zip)
2. Clear cache and dalvik cache
3. Flash through CWM
4. Reboot
Enjoy...!!!
Thanks to dhiru 1602 for overscroll glow source
Thanks to seilent for the overscroll glow tutorial
Thanks to ketut and neldar for the BLN
Last edited: