I played once with BLN for Galaxy R without modifying the kernel though. The problem with the stock kernel was that the buttons' backlight couldn't be controlled while the screen was off.
To ardatdat :
Well I have navigate to your kernel src yesterday, I have found that your 3D oc patch in tegra2_clocks.c is not complete.
I have seen that you patched the 3D CLK clock with
PERIPH_CLK("3d", "3d", NULL, 24, 0x158, 0x31E, 400000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_MANUAL_RESET), /* scales with voltage and process_id */
However, for the RATE_LIMIT part, you didn't patch the '3d' CLK rate limit as it is still limited on our board.
RATE_LIMIT("3d", 300000000, 0x04, 0x7, 0x08, 0x0F, 0x10),
So please fix it by either change the value of the rate limit to 400000000 or merge the SKUID into the one with 400000000 please.
btw, I have sent you a PM as well in case you don't watch on this subforum any more.
To ardatdat :
Well I have navigate to your kernel src yesterday, I have found that your 3D oc patch in tegra2_clocks.c is not complete.
I have seen that you patched the 3D CLK clock with
PERIPH_CLK("3d", "3d", NULL, 24, 0x158, 0x31E, 400000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_MANUAL_RESET), /* scales with voltage and process_id */
However, for the RATE_LIMIT part, you didn't patch the '3d' CLK rate limit as it is still limited on our board.
RATE_LIMIT("3d", 300000000, 0x04, 0x7, 0x08, 0x0F, 0x10),
So please fix it by either change the value of the rate limit to 400000000 or merge the SKUID into the one with 400000000 please.
btw, I have sent you a PM as well in case you don't watch on this subforum any more.
*** To all beta tester ***
First, thanks for your tests during these days and valuable feedback have been collected.
I will soon send out v1.6 beta 2 to all beta testers (maybe a few hours later), please check your PM for that and please help to test for it.
New in v1.6 beta 2:
===============
- Add script to wipe cache and dv-cache when flashing the kernel
- No worry, will not wipe any of your personal data
- You will experience longer boot up (only the first time after you have flashed, because dv-cache is wiped)
- Increase stability and smoothness by fine tuning parameters in 1.1Ghz
Again, don't hesitate to give me 'thanks' & leave any comments here. Thanks very much for all of your valuable test & response. Thanks.