R: [16.DEC.12][ROM][4.2]CyanogenMod 10.1
Fantastic
See here http://xdaforums.com/showthread.php?p=36956036
Inviato dal mio multiboot HD2
Fantastic
See here http://xdaforums.com/showthread.php?p=36956036
Inviato dal mio multiboot HD2
S
sportsstar89
Guest
Can you please tell me how to get sound to work? When i try to start an audio file, i get this message in the adb :
Last edited:
S
sportsstar89
Guest
New Build. Got Wi-Fi to initialize so it is *working* but unfortunately enabling Wi-Fi after everything is loaded will cause a kernel panic and bootloop so I need somebody who is a kernel man to help me out a bit but good news is were extremely close.
After the panic, either allow the device to reset by itself (it will wait 5 secs before auto reboot) or do it by pressing the reset button under the battery cover.
If you're using magldr, make sure sdcard is inserted and 1st partition is FAT32, go to services, DUMP DMEST.TXT, Go back, connect the phone to pc and mount as Mass storage through magldr or recovery.
If you're using clk, boot to recovery, connect the phone to pc, open up a terminal and execute "adb shell cat /proc/last_kmsg > DMESG.TXT" and the same should be created in the current working directory.
Post the resulting DMESG.txt here
R: [2.FEB.13][ROM][4.2]CyanogenMod 10.1
wonderful news, slowly the magnificent xda dev are recovering the immortal hd2. sportss thanks and thanks Rick for the commitment, devotion and hard work that you do. YOU ARE MAGNIFICENT
Inviato dal mio HD2 - Nativesd PACman v1.2a JB 4.1.2.
wonderful news, slowly the magnificent xda dev are recovering the immortal hd2. sportss thanks and thanks Rick for the commitment, devotion and hard work that you do. YOU ARE MAGNIFICENT
Inviato dal mio HD2 - Nativesd PACman v1.2a JB 4.1.2.
S
sportsstar89
Guest
Hey, could you maybe send me a link to your current build? With that I might actually be able to debug and find the issue you are having.
Can you please post the config changes you've done and the toolchain you're using to compile this ? gcc 4.4.1 works best for me (2010q1 from codesourcery)
我就是为了WIFI才来的！
Only for WIFI！
:good::good::good::good::laugh::laugh::laugh::laugh::laugh::victory::victory::victory::victory:
Only for WIFI！
:good::good::good::good::laugh::laugh::laugh::laugh::laugh::victory::victory::victory::victory:
@sportsstar89 These day i'm trying to get a working build from your source but every time that i flash that, i get the exactly same logcat.
Can you tell me what i'm doing wrong? :silly: http://pastebin.com/F1mwLQwS
Can you tell me what i'm doing wrong? :silly: http://pastebin.com/F1mwLQwS
S
sportsstar89
Guest
Re: [11.FEB.13][ROM][4.2]CyanogenMod 10.1
Yes the link is in the post before yours
And I will when I get home but its should be in the commit history and I use arm-eabi-4.4.3 and GCC 4.6
Sent from my Nexus 4 using xda premium
Yes the link is in the post before yours
And I will when I get home but its should be in the commit history and I use arm-eabi-4.4.3 and GCC 4.6
Sent from my Nexus 4 using xda premium
S
sportsstar89
Guest
Re: [11.FEB.13][ROM][4.2]CyanogenMod 10.1
Your not building hwcomposer
Sent from my Nexus 4 using xda premium
Your not building hwcomposer
Sent from my Nexus 4 using xda premium
I saw that, but i don't know what i'm missing. i've cloned the leo device tree,qsd8k-common,leo blobs and qcom-display, if you can point me to what i'm missing... (i'm a begineer)
I haven't touched anything so why it building hwcomposer?
Last edited:
S
sportsstar89
Guest
Re: [11.FEB.13][ROM][4.2]CyanogenMod 10.1
Just start from scratch and clone qsd8k common, Leo blobs and tree and the legacy repos from evervolv
Sent from my Nexus 4 using xda premium
Just start from scratch and clone qsd8k common, Leo blobs and tree and the legacy repos from evervolv
Sent from my Nexus 4 using xda premium
S
sportsstar89
Guest
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
28:laugh: Lag fixed.
Some changes in build.prop. Disabled debug and changed "persist.sys.usb.config=adb"
Here is my build.prop:
Speed is like Android 4.1.2 now.Code:# begin build properties # autogenerated by buildinfo.sh ro.build.id=JRO03L ro.build.display.id=JRO03L ro.build.version.incremental=eng.steve.20121213.150041 ro.build.version.sdk=17 ro.build.version.codename=REL ro.build.version.release=4.2.1 ro.build.date=Thu Dec 13 15:02:00 EST 2012 ro.build.date.utc=1355428920 ro.build.type=userdebug ro.build.user=steve ro.build.host=steve-DX4300 ro.build.tags=test-keys ro.product.model=HTC HD2 ro.product.brand=htc ro.product.name=leo ro.product.device=leo ro.product.board=htcleo ro.product.cpu.abi=armeabi-v7a ro.product.cpu.abi2=armeabi ro.product.manufacturer=HTC ro.product.locale.language=en ro.product.locale.region=US ro.wifi.channels= ro.board.platform=qsd8k # ro.build.product is obsolete; use ro.product.device ro.build.product=leo # Do not try to parse ro.build.description or .fingerprint ro.build.description=cm_leo-userdebug 4.2.1 JOP40D eng.steve.20121213.150041 test-keys ro.build.fingerprint=google/htc_leo/leo:4.1.1/JRO03L/239410:user/release-keys ro.build.characteristics=default ro.cm.device=leo # end build properties rild.libpath=/system/lib/libhtc_ril.so rild.libargs=-d /dev/smd0 com.qc.hardware=1 ro.sf.lcd_density=192 ro.ril.ecc.HTC-ELL=92,93,94 ro.ril.ecc.HTC-WWE=999 ro.ril.enable.a52.HTC-ITA=1 ro.ril.enable.a53.HTC-ITA=1 ro.ril.enable.a52=0 ro.ril.enable.a53=1 ro.ril.enable.dtm=1 ro.ril.gprsclass=12 ro.ril.hsdpa.category=8 ro.ril.hsupa.category=5 ro.ril.hsxpa=2 ro.ril.def.agps.mode=2 ro.ril.disable.power.collapse=0 windowsmgr.max_events_per_sec=120 mobiledata.interfaces=rmnet0,rmnet1,rmnet2,ppp0 ro.media.dec.jpeg.memcap=20000000 ro.opengles.version=131072 ro.telephony.default_network=3 ro.ril.enable.prl.recognition=1 ro.ril.enable.managed.roaming=1 ro.ril.oem.nosim.ecclist=911,112,999,000,08,118,120,122,110,119,995 ro.ril.emc.mode=2 ro.telephony.ril.v3=signalstrength,singlepdp,skipbrokendatacall #ro.vold.umsdirtyratio=20 persist.sys.usb.config=adb persist.service.adb.enable=1 wifi.interface=wlan0 wifi.supplicant_scan_interval=45 #dev.pm.dyn_samplingrate=1 ro.vendor.extension_library=/system/lib/libqc-opt.so debug.sf.hw=1 #debug.composition.type=mdp #hwui.render_dirty_regions=false #hwui.disable_vsync=true #debug.sf.no_hw_vsync=1 #hwui.print_config=choice debug.enabletr=false dalvik.vm.lockprof.threshold=500 dalvik.vm.dexopt-flags=m=y dalvik.vm.checkjni=false dalvik.vm.heapsize=128m dalvik.vm.heapgrowthlimit=48m dalvik.vm.heapstartsize=5m dalvik.vm.dexopt-data-only=1 dalvik.vm.verify-bytecode=false # SOFTBUTTONS # uncomment below prop to enable softbuttons #qemu.hw.mainkeys=0 # # ADDITIONAL_BUILD_PROPERTIES # keyguard.no_require_sim=true ro.com.android.dateformat=MM-dd-yyyy ro.carrier=unknown debug.sf.hw=1 #debug.composition.type=mdp #debug.gr.numframebuffers=2 dalvik.vm.lockprof.threshold=500 dalvik.vm.dexopt-flags=m=y dalvik.vm.checkjni=false dalvik.vm.heapstartsize=5m dalvik.vm.heapgrowthlimit=48m dalvik.vm.heapsize=128m dalvik.vm.heaptargetutilization=0.75 dalvik.vm.heapminfree=512k dalvik.vm.heapmaxfree=2m #debug.camcorder.disablemeta=1 rw.media.record.hasb=0 wifi.interface=wlan0 wifi.supplicant_scan_interval=45 com.qc.hardware=1 #dev.pm.dyn_samplingrate=1 ro.vendor.extension_library=/system/lib/libqc-opt.so ro.rommanager.developerid=cyanogenmod ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html ro.com.google.clientidbase=android-google ro.com.android.wifi-watchlist=GoogleGuest ro.setupwizard.enterprise_mode=1 ro.com.android.dataroaming=false ro.cm.version=10.1-20121213-UNOFFICIAL-leo ro.modversion=10.1-20121213-UNOFFICIAL-leo ro.config.ringtone=Orion.ogg ro.config.notification_sound=Deneb.ogg ro.config.alarm_alert=Hassium.ogg net.bt.name=Android dalvik.vm.stack-trace-file=/data/anr/traces.txt
Camera preview has some strips but pictures are ok.
Adb and usb mount did not work.17
Hi,
I can help you fix lot of issues in one shot.
I will send you the PM with fixes, go ahead and do it.
Regards,
VJ14
After the panic, either allow the device to reset by itself (it will wait 5 secs before auto reboot) or do it by pressing the reset button under the battery cover.
If you're using magldr, make sure sdcard is inserted and 1st partition is FAT32, go to services, DUMP DMEST.TXT, Go back, connect the phone to pc and mount as Mass storage through magldr or recovery.
If you're using clk, boot to recovery, connect the phone to pc, open up a terminal and execute "adb shell cat /proc/last_kmsg > DMESG.TXT" and the same should be created in the current working directory.
Post the resulting DMESG.txt here12
Hey, could you maybe send me a link to your current build? With that I might actually be able to debug and find the issue you are having.12Ok. Maybe this is missing for compiling CM10.1
BoardConfig.mk
Code:# Wifi related definesBOARD_WPA_SUPPLICANT_DRIVER := WEXT BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_wext WPA_SUPPLICANT_VERSION := VER_0_8_X BOARD_WLAN_DEVICE := bcm4329 WIFI_DRIVER_MODULE_PATH := "/system/lib/modules/bcm4329.ko" WIFI_DRIVER_FW_PATH_STA := "/vendor/firmware/fw_bcm4329.bin" WIFI_DRIVER_FW_PATH_AP := "/vendor/firmware/fw_bcm4329_apsta.bin" WIFI_DRIVER_MODULE_ARG := "iface_name=wlan firmware_path=/vendor/firmware/fw_bcm4329.bin nvram_path=/proc/calibration" WIFI_DRIVER_MODULE_NAME := "bcm4329"
