[ROM][4.0.4][MTD] CyanogenMod 9.0.0 | READ : http://goo.gl/rkEeh

Status
Not open for further replies.
Search This thread

qm4n76

Senior Member
Oct 26, 2011
340
109
Gorontalo
Yeah!

My bad! I forgot some gpio settings!

But I fixed it.

Uploading P1 model right now.

Greetings from Brazil!
thanks humberto,
downloading now, flashing/feedback asap..,
EDIT: Warning!! If you came from alroger build 19th, do not flashing through with humberos build 22th, or you need to restock your tab, there will be an error can not find MTD Partition, and tab would be bootloop repeatlly, I dont know whats wrong, but I try a few time flashing humberos build 22th among other build (cdesai build, humberos previous build) everything is ok, but when try flashing again above alroger build 19th same error occur, does any one have encounter this problem???
btw, forget to mention, have try flashing cdesai build 22th and build 23th above alroger build 19th same error occure, maybe this problem coming from alroger ROM..,
 
Last edited:
  • Like
Reactions: ozcandurmusoglu

XenoStrat

Senior Member
Feb 29, 2012
203
65
Warning!! If you came from alroger build 19th, do not flashing through with humberos build 22th, or you need to restock your tab, there will be an error can not find MTD Partition, and tab would be bootloop repeatlly

No problem for me from alroger's 20120519 to humberos's 20120522.

EDIT: about OC:
- works on 1400, 1500 with no voltage change (Antutu score : 3719 yeah!)
- tried 1600, with no voltage change and with -25mV, none worked (tablet rebooted).
 
Last edited:
  • Like
Reactions: spike1985

leblan

Senior Member
Aug 16, 2006
54
5
Riyadh
thanks humberto,
downloading now, flashing/feedback asap..,
EDIT: Warning!! If you came from alroger build 19th, do not flashing through with humberos build 22th, or you need to restock your tab, there will be an error can not find MTD Partition, and tab would be bootloop repeatlly, I dont know whats wrong, but I try a few time flashing humberos build 22th among other build (cdesai build, humberos previous build) everything is ok, but when try flashing again above alroger build 19th same error occur, does any one have encounter this problem???
btw, forget to mention, have try flashing cdesai build 22th and build 23th above alroger build 19th same error occure, maybe this problem coming from alroger ROM..,
Confirmed, I came from 19 to 23 and no boot and no recovery. Download is available though
 

spike1985

Senior Member
Jul 12, 2007
337
130
Düsseldorf
android.spike1985.de
No problem for me from alroger's 20120519 to humberos's 20120522.

EDIT: about OC:
- works on 1400, 1500 with no voltage change (Antutu score : 3719 yeah!)
- tried 1600, with no voltage change and with -25mV, none worked (tablet rebooted).

I got more than 3850 points in Antutu Q1.5 Ghz with a bunch of background tasks like messengers and so on! :p

Same experience with 1.6
 
  • Like
Reactions: XenoStrat

leblan

Senior Member
Aug 16, 2006
54
5
Riyadh
thanks humberto,
downloading now, flashing/feedback asap..,
EDIT: Warning!! If you came from alroger build 19th, do not flashing through with humberos build 22th, or you need to restock your tab, there will be an error can not find MTD Partition, and tab would be bootloop repeatlly, I dont know whats wrong, but I try a few time flashing humberos build 22th among other build (cdesai build, humberos previous build) everything is ok, but when try flashing again above alroger build 19th same error occur, does any one have encounter this problem???
btw, forget to mention, have try flashing cdesai build 22th and build 23th above alroger build 19th same error occure, maybe this problem coming from alroger ROM..,
Could you tell me what version you used for Restock
I used
- KP1 => stuck at hidden
- JQ1 => could not mount \data
Any advice appreciated
 

grukko

Senior Member
Apr 28, 2011
323
58
i still have recovery but it's rebooting at the beginning of the flash every time. guess it's time to restock.

update: I wiped dalvik/cache, took out my sdcard and this time the rom flashed successfully.

update2: my tab does not like anything over 1400mhz :(
 
Last edited:
  • Like
Reactions: spike1985

k0sh

Senior Member
Mar 24, 2011
2,338
461
Galaxy World
play.google.com
is it that hard to add a date :updates date: in your title or at least changelog ? because i can't know anything from your thread . make it CLEARER to the public . idk y its so hard on you to do that.
 

ayysir

Senior Member
Aug 30, 2011
4,552
5,980
Bronx, NY
is it that hard to add a date :updates date: in your title or at least changelog ? because i can't know anything from your thread . make it CLEARER to the public . idk y its so hard on you to do that.

The builds are dated.....

GDrive Cm9/AOKP Themes Folder (not my themes and these are free themes credit to devs): goo.gl/JnLIS
 

humberos

Inactive Recognized Developer
Oct 8, 2010
1,616
5,321
Brasília
www.humberos.com.br
is it that hard to add a date :updates date: in your title or at least changelog ? because i can't know anything from your thread . make it CLEARER to the public . idk y its so hard on you to do that.

Sorry, but which version are you mean?

CyanogenMod 9 Nightly builds ?

Unofficial builds ?

The thread title is: [ROM][4.0.4][MTD] CyanogenMod 9 Nightly builds | DEVELOPMENT THREAD

So, you have to check changelogs from Nightly server.

Greetings from Brazil!
 

k0sh

Senior Member
Mar 24, 2011
2,338
461
Galaxy World
play.google.com
Sorry, but which version are you mean?

CyanogenMod 9 Nightly builds ?

Unofficial builds ?

The thread title is: [ROM][4.0.4][MTD] CyanogenMod 9 Nightly builds | DEVELOPMENT THREAD

So, you have to check changelogs from Nightly server.

Greetings from Brazil!

i'm asking for simple method that shows the user which builds are this and whats the exact date for it . as you were doing as well in your threads you were putting a date in your thread title to SHOW to people that something happened and they have to check it. its not that hard though to do that .
 

ayysir

Senior Member
Aug 30, 2011
4,552
5,980
Bronx, NY
i'm asking for simple method that shows the user which builds are this and whats the exact date for it . as you were doing as well in your threads you were putting a date in your thread title to SHOW to people that something happened and they have to check it. its not that hard though to do that .

Lol like I said the build themselves are dated. Keep updating thread title for each nightly is tedious. Its not hard just to check get.cm or goo.im

GDrive Cm9/AOKP Themes Folder (not my themes and these are free themes credit to devs): goo.gl/JnLIS
 
  • Like
Reactions: slyv3 and humberos

humberos

Inactive Recognized Developer
Oct 8, 2010
1,616
5,321
Brasília
www.humberos.com.br
i'm asking for simple method that shows the user which builds are this and whats the exact date for it . as you were doing as well in your threads you were putting a date in your thread title to SHOW to people that something happened and they have to check it. its not that hard though to do that .

Sorry again.

Now, I confused!

But we have the date label (rom filename) for both versions. My own unofficial build and Nighlys builds.

Greetings from Brazil!
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 190
    Read this, IMPORTANT: http://goo.gl/rkEeh

    Code:
    ** These CyanogenMod builds are highly experimental and unsupported.
    **
    ** If one of this builds bricks your phone, kills your cat or causes
    ** a thermonuclear war, don't point at us. We'll laugh at you.
    ** You decided to make this modifications to your Tablet.
    **
    ** Please refrain from submitting bug reports for any issues
    ** you may encounter while running one of these builds.
    **
    ** Submitting bug reports on experimental builds is the leading 
    ** cause of male impotence.


    This is a stable Build of the current state of CyanogenMod 9 for the Samsung Galaxy Tab.
    CM9 is based on latest AOSP sources plus some useful tweaks and features.

    Known issues, Downloads and Screenshots: Post #2
    General Discussion thread : SGT7 General
    Developer only post : Post #3 (how to build and more)
    What is MTD (for epic, but its the same for all Samsung devices - except the ROM links ofcourse) http://xdaforums.com/showthread.php?t=1387334

    Please refrain from submitting bug reports for any build not released by us - report em to whom u got the build from

    We'll release new builds when we feel like doing so, although we do keep our sources updated all the time!

    The people behind this :

    angel_666
    cdesai
    humberos
    jt1134
    koxudaxi
    red_rebel
    sbradymobile
    eaut
    Techomancer

    Big thanks to Teamhacksung for all their work on the aries, and for all the help

    And Ofcourse - the CyanogenMod Team!
    88
    Known Issues + Useful info :
    USB Tethering won't work in windows (works in ubuntu, untested on OSX)
    Internal sd is /mnt/sdcard, and external is /mnt/emmc
    USB Host works with a Y cable as the tab doesn't supply power, doesn't with the standard Samsung Adapter for the new tabs.

    Official Nightlies : http://get.cm/
    p1 : http://get.cm/?device=p1 [GSM Tabs]
    p1c : http://get.cm/?device=p1c [CDMA Tabs]
    Modems :
    p1 [GSM] : http://goo.gl/EjHq5 (Flash via CWM)
    p1c [CDMA] : http://goo.gl/Dhmjl (Flash via Odin)

    READ THIS BEFORE FLASHING
    ^It's for the epic but it's pretty much the same thing except the ROM links, and the only ROMs having MTD now are CM9 based ROMs - no MTD on GB

    Only way to revert to a normal ROM now is flashing a stock Samsung ROM by odin (with repartition checked)


    How to Flash the above zips :

    You need to restock your tab if you are running an old MTD build, (only if /system isn't 406 mb, check it by the command `df system` or use an app (such as root explorer) )
    IF you are coming from a FSR (STL/BML) ROM (aka Samsung ROM - anything else than the latest CM9 builds / AOKP builds, i.e. any GB ROM, no need to restock)
    IF you are coming from a froyo ROM, you need to flash a stock GB ROM first, follow the guide below :

    Restocking :
    Follow the team overcome restock guide [http://www.teamovercome.net/p1000/?page_id=17], and completely restock your tab.
    Once you've flashed it, reboot into download mode again and flash any kernel with recovery (any non-MTD kernels from humberos.com.br, or this forum, for your tab model)
    After you've flashed the kernel, reboot into recovery, and this time, install the zip you just downloaded from CyanogenMod servers.
    Install Google Apps if you want (gapps-ics-* from goo.im) [optional]
    Reboot and enjoy your tab :)

    Normal install :
    You need to have a kernel with CWM Recovery
    Get the zip from the above download links
    Put the zip on your sdcard, reboot into recovery, and install the zip
    It'll reboot a few times during the install, that's normal :)


    attachment.php
    attachment.php
    attachment.php
    44

    Sources :

    CyanogenMod : https://github.com/CyanogenMod
    SGT7 (based off CyanogenMod sources with a few tweaks of our own) https://github.com/sgt7

    All device tress (p1, p1c and p1-common) and kernel tress (p1 and p1c) have been merged into the CyanogenMod tree now, if you want to submit a change/patch, use cm code-review [http://wiki.cyanogenmod.com/wiki/Howto:_Gerrit]

    How to get the sources :
    Setup Android Build Environment (http://source.android.com)
    Code:
    mkdir ~/cm9
    cd ~/cm9
    repo init -u git://github.com/CyanogenMod/android.git -b ics
    (Type in your name and email address when asked)
    Code:
    repo sync
    (^^This'll take a while, as ~7GB of sources are downloaded initially)

    How to build :
    Code:
    source build/envsetup.sh
    cd device/samsung/p1 ; ./extract-files.sh
    brunch p1
    Replace p1 with p1c for CDMA variants.
    Building may take a long time depending on your machine, might range from a few minutes to many hours
    After the build is done, navigate to ~/cm9/out/target/product/p1
    The zip you'll be looking for would be update-cm-9.0.0-RC0-p1-UNOFFICIAL-signed.zip

    If you want to build just the kernel, type the below commands
    Code:
    source build/envsetup.sh
    make out/target/product/p1/boot.img

    If you want just the kernel - u'll get it in the same folder, boot.img
    Flash it with heimdall
    heimdall flash --kernel ~/cm9/out/target/product/galaxytab/boot.img --recovery ~/cm9/out/target/product/galaxytab/boot.img

    ^^The above instructions were for building a clean CyanogenMod build for p1, without any changes we did to the sources (mainly frameworks and some apps)

    IF you want to build that, sync from https://github.com/sgt7/android.git instead of CyanogenMod, and then build using the same commands
    38
    I got some news!

    https://plus.google.com/115013390614274076135/posts/CcmArQkDDXn

    Official builds coming soon!


    But, till then, i suggest the kangers not to sync, as i'll be changing stuff upstream which might break the build(mainly vendor/samsung, device is now p1 and p1c)

    So, dont repo sync until i give a heads up(or remove vendor/samsung from your manifest)

    And, don't try to build p1 atm (uploading it in a while) - Can build the good old galaxytab fine, just don't try to build p1 or you'll be on your own (you'll know why soon)
    37
    CM9 - Updates

    Hi fellows!

    Just check it!

    http://www.humberos.com.br/p/android-ics.html

    ps. Today is my brother birthday!
    This is for him!



    Greetings from Brazil!

    Enjoy!