[GUIDE]SuperCharger Script..!!..[SIMPLIFIED]

Search This thread

kk9999gada

Senior Member
SUPERCHARGER SCRIPT
Improve Your Phone's Performance and Experience a New Change

sigpic3357461_40.gif

Link to Original Thread : http://xdaforums.com/showthread.php?t=991276

Welcome to the Most Wanted THREAD that Ace Plus Users were demanding till now.

Disclaimer:
No one will be responsible for any damages caused to your device except you. Make sure you do this at own risk.

Pre-requisites:
  1. Android version required - Gingerbread or JellyBean
  2. Make Sure your phone is charged at least 80%.
  3. You are doing this all at you own risk.
  4. Follow all the On Screen Instructions Very Carefully. Because it might happen that I may miss something while typing in this guide.
  5. Dont forget to create a CWM Backup first.

Requirements :
  1. Rooted Device
  2. Busybox
  3. SuperCharger Script.
  4. Smanager
  5. Patience

Downloads:
  1. Script
  2. Busybox + Zipalign Binary
  3. SManager

Procedure:

-First Stage (Running the Script):
  1. Download all the above given things and copy them to SD card also extract the "V6_SuperCharger_for_Android-Update9_RC12_Test_6.sh" file inside V6_SuperCharger.zip to SD Card.
  2. Flash Busybox + Zipalign Binary through CWM if busy box is not there inside /system/xbin not there in your ROM. If it is there then flash only Zipalign_Binary.zip
    (Do this step Carefully)
  3. Install SManager or Download from Play Store.
  4. Open SManager and Select the V6_SuperCharger_xxxxxxx.sh
    attachment.php
  5. Now a Pop-up will appear Select “SU” (See Image). Select “Is script”
    attachment.php
  6. Now press “Run” and Grant Superuser Access.
  7. Now the Script is started. Follow Stage 2 below.

-Second Stage (Executing the Script Commands):
  1. When you will see like this (See Image) Press the Enter Key…
    attachment.php

    (Note: Whenever it asks to Press enter key, press it. It will ask this after every step.)
  2. Now Select Scrolling Speed. Enter any number you want 1 or 2 or 3.
    (Mine is No. 2)(See Image)
    attachment.php
  3. Now it will ask “Pick a Kernel Strength”. Type “N” or “n” and Hit “Enter”
    attachment.php
  4. Now Type “Y” when asked for “Enable Misc. & SD Card Tweaks?”
    attachment.php
  5. It will now ask to “Enable 3G Turbo Enhancement” Type “Y” and Press Enter.
    attachment.php
  6. Now for “Run Fix Alignment on Boot”, Press “Y” and hit enter.
    attachment.php
  7. Now “Run Detailing on boot?” Press “Y” and Hit Enter
    attachment.php
  8. Now it will ask “How often?” Press 1 and Hit Enter.
    attachment.php
  9. For “Disable Awesome V6 Animation”. Say “No”
    attachment.php
  10. Now the Script will ask to “Apply SuperMinFree Calculator Settings?” Press “Y” and Hit Enter.
    attachment.php
  11. Now it will ask “Enter (U)ltimatic, (I)nstall, E(x)it” Press “x” and Hit Enter.
    attachment.php
  12. Now it will ask to return to Driver’s Console. Press Enter Key.
  13. We have now almost done with the script.
  14. Now you are prompted to enter an option from “Driver’s Console”
  15. Type Option No. “21” and Hit enter.
    attachment.php
  16. Now Press any Key to say “Yes”
    (Don’t press “N”)
  17. Now Enter Option No. “22” and hit enter.
  18. Now press “N” to Nullify and Press enter.
    attachment.php
  19. Now Enter Option No. “17” and press enter.
  20. Now you will be prompted “Continue and Flush it all away?” Press enter.
  21. Now it will ask “Change Options?” Type “Y” and press enter.
  22. Now Enter “E” and Press enter.
  23. Now “How often do you want it to flush?” Type the value and hit enter
    (Enter any value from 1 – 24) (Mine is 3)
  24. Now Enter Option No. “6” and hit enter.
    (This is for balanced 512HP Settings MinFree Values)
  25. Now enter option No. “32” and press enter.
  26. Now it will ask “Do you want to SuperClean & Restart now?” Type “Y” and press enter.
    attachment.php
  27. Now your Device will reboot. It will take some time to reboot so be keep patience
  28. Thats it. Enjoy.

Credits : zeppelinrox
 

Attachments

  • Zipalign_Binary.zip
    149.6 KB · Views: 354
  • Busybox+Zipalign_Binary.zip
    734.6 KB · Views: 380
  • SManager_2.8.3.apk
    1.2 MB · Views: 357
  • V6_SuperCharger.zip
    62.5 KB · Views: 393
  • Screenshot_2013-12-19-12-49-20.png
    Screenshot_2013-12-19-12-49-20.png
    29.2 KB · Views: 4,627
  • Screenshot_2013-12-19-12-49-36.png
    Screenshot_2013-12-19-12-49-36.png
    33.6 KB · Views: 4,602
  • Screenshot_2013-12-19-12-50-30.png
    Screenshot_2013-12-19-12-50-30.png
    22.7 KB · Views: 4,615
  • Screenshot_2013-12-19-12-51-50.png
    Screenshot_2013-12-19-12-51-50.png
    29.1 KB · Views: 4,578
  • Screenshot_2013-12-19-12-52-42.png
    Screenshot_2013-12-19-12-52-42.png
    33.8 KB · Views: 4,584
  • Screenshot_2013-12-19-12-53-38.png
    Screenshot_2013-12-19-12-53-38.png
    29.2 KB · Views: 4,548
  • Screenshot_2013-12-19-12-54-27.png
    Screenshot_2013-12-19-12-54-27.png
    23.5 KB · Views: 4,522
  • Screenshot_2013-12-19-12-54-49.png
    Screenshot_2013-12-19-12-54-49.png
    23.9 KB · Views: 4,508
  • Screenshot_2013-12-19-12-56-54.png
    Screenshot_2013-12-19-12-56-54.png
    23.7 KB · Views: 4,504
  • Screenshot_2013-12-19-12-57-34.png
    Screenshot_2013-12-19-12-57-34.png
    20.5 KB · Views: 4,483
  • Screenshot_2013-12-19-12-58-02.png
    Screenshot_2013-12-19-12-58-02.png
    21.3 KB · Views: 4,452
  • Screenshot_2013-12-19-12-59-05.png
    Screenshot_2013-12-19-12-59-05.png
    26.6 KB · Views: 4,426
  • Screenshot_2013-12-19-13-03-32.png
    Screenshot_2013-12-19-13-03-32.png
    24.2 KB · Views: 4,454
  • Screenshot_2013-12-19-13-06-18.png
    Screenshot_2013-12-19-13-06-18.png
    28.7 KB · Views: 4,385
  • Screenshot_2013-12-19-13-09-41.png
    Screenshot_2013-12-19-13-09-41.png
    23.5 KB · Views: 4,393
  • Screenshot_2013-12-19-13-19-08.png
    Screenshot_2013-12-19-13-19-08.png
    21.9 KB · Views: 4,389
Last edited:

ANDROID-000

Senior Member
Oct 9, 2013
493
58
Finally! Thanks for this thread:D:thumbup:Bro how about the blackdog version of supercharger? I think thats the latest or you prefer to use this version?
 

ANDROID-000

Senior Member
Oct 9, 2013
493
58
I use this Version so I posted this. This version also does well.

You can use blackdog version instead of this and most of the steps for installing are same.

I run it a while ago in galaxy pure by @j.posarekar70 but instead of no lag what happened was opposite. What rom did you use when you run this script.?

---------- Post added at 04:05 PM ---------- Previous post was at 04:01 PM ----------

And i can understand more the guide here than the OP (no offense:D) thanks!
 

coolfzk

Senior Member
Mar 15, 2013
187
49
Zhengzhou
so many steps that I don't want to have a try.still thanks for your effort!

Sent from my GT-S7500 using XDA Premium 4 mobile app
 

kk9999gada

Senior Member
so many steps that I don't want to have a try.still thanks for your effort!

Sent from my GT-S7500 using XDA Premium 4 mobile app

It is very simple just give it a try. It will not take more than 15-20 mins.

I run it a while ago in galaxy pure by @j.posarekar70 but instead of no lag what happened was opposite. What rom did you use when you run this script.?

---------- Post added at 04:05 PM ---------- Previous post was at 04:01 PM ----------

And i can understand more the guide here than the OP (no offense:D) thanks!

I am Currently using this script on Techkang's CM 10.1.3 and it does well.
 
  • Like
Reactions: ANDROID-000

mon_iker

Senior Member
Aug 18, 2008
115
24
I thought minfree and oom values cannot be changed in jelly bean without patching services.jar? I mean, that's what zeppelinrox has put up in his thread...
 

trendchanger

Senior Member
May 6, 2013
369
47
mumbai
done

I have followed everything...but now how to check whether script is running????
performance is improved..no doubt...but still can v check by NY means???
also if u can provid blackdog script instruction it wud b get...
 

Gurtej Sandhu

Senior Member
Apr 19, 2013
84
20
will this improve battery life??

First of all thanks to u dev for your great work...!!!!!
and will this script improves battery life or not and what about touch response..???

and also dev can u port the stock music player (2.3.6) or s4/s3 music player to CM10.2 as i really don't like that apollo player.?????
 

danyznd123

Senior Member
Jun 21, 2013
266
186
Beirut
Can you tell me what is the supercharger script and what are his benefits??
And will it work on your isnpiration rom?
 

kk9999gada

Senior Member
First of all thanks to u dev for your great work...!!!!!
and will this script improves battery life or not and what about touch response..???

and also dev can u port the stock music player (2.3.6) or s4/s3 music player to CM10.2 as i really don't like that apollo player.?????

Yes, it will improve everything that you mentioned.
Porting Music Player is not that easy. Only an expert can do that.

Can you tell me what is the supercharger script and what are his benefits??
And will it work on your isnpiration rom?

Read all the benefits in the Original Thread. the link is in OP.
Inspiration ROM already has this script running in background. No need to do it again.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 9
    SUPERCHARGER SCRIPT
    Improve Your Phone's Performance and Experience a New Change

    sigpic3357461_40.gif

    Link to Original Thread : http://xdaforums.com/showthread.php?t=991276

    Welcome to the Most Wanted THREAD that Ace Plus Users were demanding till now.

    Disclaimer:
    No one will be responsible for any damages caused to your device except you. Make sure you do this at own risk.

    Pre-requisites:
    1. Android version required - Gingerbread or JellyBean
    2. Make Sure your phone is charged at least 80%.
    3. You are doing this all at you own risk.
    4. Follow all the On Screen Instructions Very Carefully. Because it might happen that I may miss something while typing in this guide.
    5. Dont forget to create a CWM Backup first.

    Requirements :
    1. Rooted Device
    2. Busybox
    3. SuperCharger Script.
    4. Smanager
    5. Patience

    Downloads:
    1. Script
    2. Busybox + Zipalign Binary
    3. SManager

    Procedure:

    -First Stage (Running the Script):
    1. Download all the above given things and copy them to SD card also extract the "V6_SuperCharger_for_Android-Update9_RC12_Test_6.sh" file inside V6_SuperCharger.zip to SD Card.
    2. Flash Busybox + Zipalign Binary through CWM if busy box is not there inside /system/xbin not there in your ROM. If it is there then flash only Zipalign_Binary.zip
      (Do this step Carefully)
    3. Install SManager or Download from Play Store.
    4. Open SManager and Select the V6_SuperCharger_xxxxxxx.sh
      attachment.php
    5. Now a Pop-up will appear Select “SU” (See Image). Select “Is script”
      attachment.php
    6. Now press “Run” and Grant Superuser Access.
    7. Now the Script is started. Follow Stage 2 below.

    -Second Stage (Executing the Script Commands):
    1. When you will see like this (See Image) Press the Enter Key…
      attachment.php

      (Note: Whenever it asks to Press enter key, press it. It will ask this after every step.)
    2. Now Select Scrolling Speed. Enter any number you want 1 or 2 or 3.
      (Mine is No. 2)(See Image)
      attachment.php
    3. Now it will ask “Pick a Kernel Strength”. Type “N” or “n” and Hit “Enter”
      attachment.php
    4. Now Type “Y” when asked for “Enable Misc. & SD Card Tweaks?”
      attachment.php
    5. It will now ask to “Enable 3G Turbo Enhancement” Type “Y” and Press Enter.
      attachment.php
    6. Now for “Run Fix Alignment on Boot”, Press “Y” and hit enter.
      attachment.php
    7. Now “Run Detailing on boot?” Press “Y” and Hit Enter
      attachment.php
    8. Now it will ask “How often?” Press 1 and Hit Enter.
      attachment.php
    9. For “Disable Awesome V6 Animation”. Say “No”
      attachment.php
    10. Now the Script will ask to “Apply SuperMinFree Calculator Settings?” Press “Y” and Hit Enter.
      attachment.php
    11. Now it will ask “Enter (U)ltimatic, (I)nstall, E(x)it” Press “x” and Hit Enter.
      attachment.php
    12. Now it will ask to return to Driver’s Console. Press Enter Key.
    13. We have now almost done with the script.
    14. Now you are prompted to enter an option from “Driver’s Console”
    15. Type Option No. “21” and Hit enter.
      attachment.php
    16. Now Press any Key to say “Yes”
      (Don’t press “N”)
    17. Now Enter Option No. “22” and hit enter.
    18. Now press “N” to Nullify and Press enter.
      attachment.php
    19. Now Enter Option No. “17” and press enter.
    20. Now you will be prompted “Continue and Flush it all away?” Press enter.
    21. Now it will ask “Change Options?” Type “Y” and press enter.
    22. Now Enter “E” and Press enter.
    23. Now “How often do you want it to flush?” Type the value and hit enter
      (Enter any value from 1 – 24) (Mine is 3)
    24. Now Enter Option No. “6” and hit enter.
      (This is for balanced 512HP Settings MinFree Values)
    25. Now enter option No. “32” and press enter.
    26. Now it will ask “Do you want to SuperClean & Restart now?” Type “Y” and press enter.
      attachment.php
    27. Now your Device will reboot. It will take some time to reboot so be keep patience
    28. Thats it. Enjoy.

    Credits : zeppelinrox
    6
    Driver's Console

    Console.jpg
    1
    Finally! Thanks for this thread:D:thumbup:Bro how about the blackdog version of supercharger? I think thats the latest or you prefer to use this version?

    I use this Version so I posted this. This version also does well.

    You can use blackdog version instead of this and most of the steps for installing are same.
    1
    so many steps that I don't want to have a try.still thanks for your effort!

    Sent from my GT-S7500 using XDA Premium 4 mobile app

    It is very simple just give it a try. It will not take more than 15-20 mins.

    I run it a while ago in galaxy pure by @j.posarekar70 but instead of no lag what happened was opposite. What rom did you use when you run this script.?

    ---------- Post added at 04:05 PM ---------- Previous post was at 04:01 PM ----------

    And i can understand more the guide here than the OP (no offense:D) thanks!

    I am Currently using this script on Techkang's CM 10.1.3 and it does well.
    1
    What kernel version? (New 3 xxx kernel or 2.6 xxx kernel?) I cant download in his website can i ask your link? Thanks!

    I use Kernel 2.6.x. I'll PM you the link.