Uberizer - A Must For All Tablet Users!

Search This thread

gesange

Senior Member
Jan 10, 2012
249
146
Gornji Petrovci
I present you the powerfull tool that I ever seen for tablets........UBERIZER!

uberizer001.gif

This is not mine!
It's the tool from Techkn0w ( type in on google )
Dont give me credits because I just wanted to share and I apologize to the one's about forgetting to mention the original site.

I recommend PDAnet drivers( instructions on the link below): http://www.topnotchtablets.com/installADBdriver

DOWNLOAD: http://www.mediafire.com/?6wnvzxmeepc11o1


Use the Uberizer to:
* connect
* improve
* backup
* control
* debug
* unlock full play store
* mod
* optimize
* personalise
* root
* and more!


Uberizer Quickstart Guide:
Connecting your device to your computer:

To get started using the Uberizer you will need to connect to your computer. This can be done 2 ways:
* Wireless (RECOMMENDED) (REQUIRES ROOT!)
* Wired (Advanced users only) (Can ROOT devices)

The reason why wireless is recommend is because it's easy! Wired installation requires you to install
the ADB driver which can sometimes have problems, some devices have wierd ADB ports so you will have
problems finding the proper cable for it and some devices don't have ADB ports at all.

** Setting up your device for Wireless Uberizing (RECOMMENDED)

1. Go to the Wireless Menu (w)
2. Enable Wireless ADB using ONE of these options: 2, 4 or 5, whichever is most easy for your situation.
3. If you use an app (4 or 5), start the app on your Android device.
Use option 6 to connect to the given IP in the app.
If you chose option 2, you must find your device IP, go to Settings, About device, Status, to see the IP.

** Setting up your device for Wired Uberizing (Advanced users only)

1. Install ADB drivers (from dir usb_driver) for wired ADB
2. Boot Android, connect device (on the device, the statusbar will display "usb debugging mode is activated")
3. Run this tool, analyse device so this tool can seek info of your device
and will check if your model is supported by mods

NOTE: Your device must have "ADB Debugging" checked in: "Settings \ Developer options \ USB debugging (Debug mode when USB is connected)"

Enjoy :D

If I helped hit the "THANKS" button :) (its not that hard is it?)
 
Last edited:

gesange

Senior Member
Jan 10, 2012
249
146
Gornji Petrovci
Credits goes to the developers of this application and the site.
Just want to share something useful here......so please no agression here.
Thanks

Sent from my shooteru using xda premium
 
  • Like
Reactions: syuikaoxxi

JG

Senior Member
Jun 12, 2012
1,734
1,138
United States
OP Thanks for this I looked everywhere for a DL site and got the run around everywhere until you posted this .Finally got it cant wait to try!
 
  • Like
Reactions: gesange

gesange

Senior Member
Jan 10, 2012
249
146
Gornji Petrovci
here forum of the developer ..

the original poster shud have asked permission from the developer prior to posting the direct link

search for techknow .. toxic.nl

Sorry I have forgotten too mention it in here.
Techknow is the original site and I really dont want credits for work i do not own or anything like that.


Sent from my HTC EVO 3D X515m using Tapatalk 2
 

mari133

Member
Feb 15, 2011
12
0
Mogilno
Hi,
I have dump:
boot.img 32 Mb
bootloader 16 Mb
data.tgz 52 Mb
recovery.img 32 Mb
system.tgz 162 MB

and when i try to restore by Uberizer i have problem
"invalid options --z"


Can anyone help me?
 

master rx

Member
Jul 5, 2009
6
1
Bogota D.C.
Excelent

Thanks for sharing this software. This help me to recover a blocked A13 Fake Galaxy Tab. Also thanks for the creator of this software, is a impressive tool for chinese tablets.

Sorry for my bad english by the way.
 
  • Like
Reactions: dreamersx

dogmatism

Senior Member
Dec 20, 2006
290
152
OP has an old version 1.4

Here is the latest 1.8

https://www.mediafire.com/?uq2bjmbp71nnb4f

A lot of updates since that, change log for 1.8:
Changelog:
v1.8 (189 functions):
* upgraded google market / play store to 4.4.2.2
* fixed recovery flash in the Allwinner recovery procedure
* removed driver preinstallation procedure as it has some problems with some devices
* fixed root check option
* added auto launch of the TechKnow ToolKit on installation
* added various item k/26: scriptexe, takes a .SH file from \files_to_sd and executes it!
* added changer_files\CONMOD.sh, a script to change configurations of WM8650's
* added v. MediaManager 1. Add Wireless Device
* added v. MediaManager 2. List online mediaplayers
* added v. MediaManager 3. Sync \files_to_sd to all
* added v. MediaManager 4. Play file on mediaplayers
* added v. MediaManager 5. Stop file playback on all
* added v. MediaManager 6. EZ Video Syncmode
* added v. MediaManager 7. EZ Image Syncmode
* added v. MediaManager 8. EZ Audio Syncmode
* added v. MediaManager 9. Deploy APKs to all
* added v. MediaManager 10. Sync date and time
* added v. MediaManager 11. Erase all /sdcard
* added v. MediaManager H. Help
* removed preinstall drivers directory
* rewrote the CWM WRITE procedure for AllWinner
* updated the code to show techknow's new domain: www.techknow.me instead of the old www.techknowforum.net
* added i. 13 show/dump device partition information

ref: http://www.techknow.me/forum/index.php?topic=7477.0
 

petesimon

Senior Member
Aug 5, 2013
84
26
Oklahoma
www.facebook.com
need mirror link to Uberizer 1.8

OP has an old version 1.4
Here is the latest 1.8
https://www.mediafire.com/?uq2bjmbp71nnb4f

Thanks, but that link https://www.mediafire.com/?uq2bjmbp71nnb4f is dead/deleted. I'm trying to mod the firmware of a HD sports action camera that has an Allwinner V3 cpu (single core?) and runs Android 4.2 and uses squashfs mainly.

Is this link okay?: http://www29.zippyshare.com/v/8765535/file.html

or what's another reliable link to Uberizer 1.8 or newer? Thanks.
 
  • Like
Reactions: lex66676

Retnuh66

Member
Jan 20, 2011
5
0
I know this is a super old thread, but I just downloaded the first link and Avast flagged it as adware. Thought it would be good to warn people. This might be a false positive. Use at your own risk or in a sandbox.

Edit: Now analyzed with VirusTotal.

You can see the full report here - https://www.virustotal.com/en/file/...50f0420ab5d4be027085500cb476153ecee/analysis/

Results -
AegisLab: Trojan.Win32.Generic.4!c
Arcabit: Android.Adware.Dowgin.gQKG
BitDefender: Android.Adware.Dowgin.gQKG
Bkav: W32.OnGamesLT070912HKGHAA.Trojan
F-Secure: Android.Trojan.Ransom.gTHZV
GData: Android.Trojan.Ransom.gTHZV
MAX: malware (ai score=85)
NANO-Antivirus: Trojan.Android.Agent.dudyld

Again, this may be a false positive. But I'm very suspicious about it.
The actual installed executable itself also comes up on a few programs as a virus.

This might be the result of using a sketchy packer (a lot of people do, especially when re-packing a cracked program) but it doesn't make a lot of sense to me that this executable would have been repacked, and the fact that some scanners are coming up with specific viruses (dowgin, which is android adware) makes it seem less like it's just a heuristic thing.

Side note: I do get VirusTotal results for the installed executable when downloading the installer from various sources, however I get different (less) results on the installer depending on where I got it.
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 52
    I present you the powerfull tool that I ever seen for tablets........UBERIZER!

    uberizer001.gif

    This is not mine!
    It's the tool from Techkn0w ( type in on google )
    Dont give me credits because I just wanted to share and I apologize to the one's about forgetting to mention the original site.

    I recommend PDAnet drivers( instructions on the link below): http://www.topnotchtablets.com/installADBdriver

    DOWNLOAD: http://www.mediafire.com/?6wnvzxmeepc11o1


    Use the Uberizer to:
    * connect
    * improve
    * backup
    * control
    * debug
    * unlock full play store
    * mod
    * optimize
    * personalise
    * root
    * and more!


    Uberizer Quickstart Guide:
    Connecting your device to your computer:

    To get started using the Uberizer you will need to connect to your computer. This can be done 2 ways:
    * Wireless (RECOMMENDED) (REQUIRES ROOT!)
    * Wired (Advanced users only) (Can ROOT devices)

    The reason why wireless is recommend is because it's easy! Wired installation requires you to install
    the ADB driver which can sometimes have problems, some devices have wierd ADB ports so you will have
    problems finding the proper cable for it and some devices don't have ADB ports at all.

    ** Setting up your device for Wireless Uberizing (RECOMMENDED)

    1. Go to the Wireless Menu (w)
    2. Enable Wireless ADB using ONE of these options: 2, 4 or 5, whichever is most easy for your situation.
    3. If you use an app (4 or 5), start the app on your Android device.
    Use option 6 to connect to the given IP in the app.
    If you chose option 2, you must find your device IP, go to Settings, About device, Status, to see the IP.

    ** Setting up your device for Wired Uberizing (Advanced users only)

    1. Install ADB drivers (from dir usb_driver) for wired ADB
    2. Boot Android, connect device (on the device, the statusbar will display "usb debugging mode is activated")
    3. Run this tool, analyse device so this tool can seek info of your device
    and will check if your model is supported by mods

    NOTE: Your device must have "ADB Debugging" checked in: "Settings \ Developer options \ USB debugging (Debug mode when USB is connected)"

    Enjoy :D

    If I helped hit the "THANKS" button :) (its not that hard is it?)
    6
    Sir, there is password in download link...
    may i know for this

    it's TechKnow :D
    4
    OP has an old version 1.4

    Here is the latest 1.8

    https://www.mediafire.com/?uq2bjmbp71nnb4f

    A lot of updates since that, change log for 1.8:
    Changelog:
    v1.8 (189 functions):
    * upgraded google market / play store to 4.4.2.2
    * fixed recovery flash in the Allwinner recovery procedure
    * removed driver preinstallation procedure as it has some problems with some devices
    * fixed root check option
    * added auto launch of the TechKnow ToolKit on installation
    * added various item k/26: scriptexe, takes a .SH file from \files_to_sd and executes it!
    * added changer_files\CONMOD.sh, a script to change configurations of WM8650's
    * added v. MediaManager 1. Add Wireless Device
    * added v. MediaManager 2. List online mediaplayers
    * added v. MediaManager 3. Sync \files_to_sd to all
    * added v. MediaManager 4. Play file on mediaplayers
    * added v. MediaManager 5. Stop file playback on all
    * added v. MediaManager 6. EZ Video Syncmode
    * added v. MediaManager 7. EZ Image Syncmode
    * added v. MediaManager 8. EZ Audio Syncmode
    * added v. MediaManager 9. Deploy APKs to all
    * added v. MediaManager 10. Sync date and time
    * added v. MediaManager 11. Erase all /sdcard
    * added v. MediaManager H. Help
    * removed preinstall drivers directory
    * rewrote the CWM WRITE procedure for AllWinner
    * updated the code to show techknow's new domain: www.techknow.me instead of the old www.techknowforum.net
    * added i. 13 show/dump device partition information

    ref: http://www.techknow.me/forum/index.php?topic=7477.0
    2
    For all who would like to know and want an update. :)

    Uberizer v1.8 by HcH (HardCoreHacker) from www.TechKnow.me his site.

    You can download the latest version from here: http://www.techknow.me/forum/index.php?topic=7477.0

    Just in case you missed dogmatism link to the bottom of his post above. :)

    - orbit
    2
    AW: Uberizer - A Must For All Tablet Users!

    Wow, that actually looks promising. Will test soon.

    Sent from my GT-I9300 using xda premium