Just so we're all on the same page. No need to flash this one if you don't want to use the lazy governor as it's basically the same as test7 other than the addition of lazy:
There is like lock screen customizations and a couple of AOKP wallpapers, that's really all I think of at the moment.
Sent from my ADR6300 using XDA
AOKP also has the ability to add a horribly obtrusive navigation bar (read: Galaxy Nexus) with soft keys to the bottom of your screen, and take up real estate from our already limited resolution.
I'll give it a spin. Which governor do you typically use? I'm wrapping up a week using lagfree with no other changes, i.e. under/over volting/clocking, and I've been well pleased with the battery life. Especially today, moderate use: 7hrs up and still 75% battery.
AOKP has a few things that I like. The main thing for me is that toggles are better looking IMO and I love the battery circle mod...kind of petty sounding but I just like them better. There are a few other minor things too. The navigation bar stuff doesn't apply to us as our screens are too small. If drk.hd could integrate AOKP with HWA that would be the jam.
I like both lagfree and lazy about the same but I like them both the best. SAV2 would be a close third though. It's really hard to tell as the inc is not my daily driver and I only use it now for toying with ROMs or kernels and not really to test performance.
Just installed this and it's pretty stable. Only a few questions about it...
1. No torch/flashlight? Do I have to install an app for that?
2. Autostarts can't seem to get root access, so it doesn't work. Everything looks fine in superuser, and all other rooted apps work.
1. No torch/flashlight? Do I have to install an app for that?
2. Autostarts can't seem to get root access, so it doesn't work. Everything looks fine in superuser, and all other rooted apps work.
1) correct, I use "Teslaled" which is available in the Store. It's slightly awesome.
2) clear data in Superuser and see if that helps.
1. Teslaled doesn't have the max brightness option that CM7's Torch app has. But, it seems that I had a backup of Torch 2.3.7 in Titanium Backup which works perfectly once restored. I wonder why a Torch app doesn't come with CM9 since CM7's works perfectly...
2. I've reinstalled autostarts, cleared superuser, etc. with no change. What happens after a fresh install is superuser comes up, asks to allow/deny the request, i allow, and then i get an error that there's no root access. has anyone else been able to use autostarts without issue?
Last edited:
I use Tesla led also and its pretty damn bright, I can't imagine it being much brighter
Sent from my ADR6300 using XDA
Sent from my ADR6300 using XDA
Seems that torch 2.3.7 is brighter than teslaled when on max brightness, but the regular led (the non-max brightness setting) is much dimmer than it should be...
seems updating to autostarts 1.7.5 did the trick. sorry for the false alarm
seems updating to autostarts 1.7.5 did the trick. sorry for the false alarm
Last edited:
yes, i prefered the Torch from CM7 and just restored the backup and it works perfectly! Now i just wish i could get the FM radio to work.
What is autostarts and what is the advantage of having it?
Also, does anyone know how to check which apps are accessing GPS? I used to use spare parts and that would tell me the GPS usage, but it doesn't do it anymore.
I've been running this rom with the latest incredikernel for the last day and a half and I'm incredibly impressed, especially since it's technically still in alpha. No random reboots so far, and I've run it pretty hard (Spotify and Navigation at the same time, etc.). The only caveat is the battery life. I've got the governor set to smartassv2 and when the phone is inactive it's great, but as soon as it's put into use then the battery percentage starts to drop dramatically. Yesterday I killed the battery in 5-6 hours with moderate to lite use. Anyone else had any luck with the other governors?
Sent from my ADR6300 using XDA
Sent from my ADR6300 using XDA
Having a problem with notifications. I've tried three different SMS apps and I can't figure out how to get the notification light working. I have gone into settings on phone and added the app to notification light and the test works. When I receive a message however, I don't get a blinking notification light. I have even changed settings in the app such as in go SMS but the test within the app will not blink. Any ideas?
Sent from my ADR6300 using Tapatalk 2
Sent from my ADR6300 using Tapatalk 2
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
56This rom is built from CM9 source with device and Hardware trees based on Evervolv's. There are NO other customizations to this rom, just pure AOSP and CM9.
NOTICE:
** This CyanogenMod build is highly experimental and unsupported. Many things may be broken. I offer no guarantees as to this working at all on your phone.
What Works
- Hardware Acceleration
- Bluetooth, GPS, Wifi
- LED notification, Rotation, etc.
- Panorama
- Barcode scanning
- Camcorder
Instructions
- Download the rom and Gapps from below
- Reboot into recovery
- Make a backup! Don't blame me if you install this and can't go back.
- Wipe data/Factory Reset
- Under Mounts/Storage, wipe System
- Install the rom
- Install Gapps
- Reboot
- Enjoy
Downloads
Dev-Host - Build a9
Mediafire mirror - Build a9
Gapps
MD5 for Build a9: 9c0777a3c5462b7de1d16da2664b5e5b
Older releases
All
NOTICE - HWA is included with the latest KGSL drivers, so the only kernels that work are the stock kernel and others built specifically for the drivers. This includes the latest Incredikernel HWA Beta and mamarley's Beta kernel
Incredikernel HWA Beta 2 can be found here.
mamarley's kernel can be found here
What's New
- New KGSL drivers for smoother HWA
- Many behind-the-scenes updates for a much smoother experience
Unofficial Changelog
CM-Nightlies Kang
Credits
- The CM team for CyanogenMod
- Evervolv for the device tree, and getting ICS to where it is on the Incredible
- The Tiamat team for the kernel source and HWA
My Github can be found here.10I hope you aren't tired of flashing, because I have one more coming your way, and this one is big. The Evervolv team just pushed through some major fixes to the camera HALs just this morning that should enable barcode scanners and panorama mode. Additionally, rywri has just posted a new camera apk with some code that fixes the camera fc when using panorama. Check his thread out here.
What this means for YOU is that I'm (probably) going to put out yet another build today with working barcode scanner and panorama.
That's odd, it's working for me. I do know that CM made some changes to su recently to try to fix some bugs...9New build is up! Get it while it's hot!
Like the preview release, only kernels built for the new drivers work. This limits you to Incredikernel HWA Beta 2 and mamarley's beta kernel, along with the stock kernel, of course.
Get it here!8New Build
New build is out! Get it here.
Changes:
- CM9 updates
- Evervolv updates
- General cleanup
I'm done with finals now, so my dev work should be speeding up. The main thing to work on right now is actually the kernel, so we don't have to rely on outside kernels. Then comes getting the needed changes to the qcom libs into CM. Busy busy!
New posts
-
[Discussion] Magisk - The root-hiding and mod-hiding cat-and-mouse game
- Latest: intel_core_i7
-
General [HELP THREAD] Ask ANY Question. Noob Friendly.- Latest: SubwayChamp
