Stop, listen. Follow my directions, if you fail to follow directions I will no longer help you. Don't PM me and ask. If you screw up ask in the thread.
Rooted Users (Non - Root Users scroll down below):
MR1 RUU
http://www.multiupload.com/KU7GSF2EY0
PG05IMG_MR1_no_hboot.zip - c64b4367086fff4f51ec3d5d766a0456
Bootloader (FLASH THIS LAST) FLASHING THIS WITHOUT SUCESSFULLY FLASHING THE ABOVE FILE WILL CAUSE A SECURITY WARNING
http://www.multiupload.com/26WG1UZCXR
abda920f3e159fb05c00d8c54a5b8768 - PG05IMG_hboot_1.4.0000.zip
Flash the above PG05IMG_MR1_no_hboot.zip to restore everything to stock + OTA BUT still will have the s-off bootloader.
Rename PG05IMG_MR1_no_hboot.zip as PG05IMG.zip, and flash through hboot (like in the root guide).
To restore the bootloader, rename PG05IMG_hboot_1.4.0000.zip as PG05IMG.zip and flash through the bootloader. DO NOT FLASH THIS unless you are absolutely sure PG05IMG_MR1_no_hboot.zip flashed to your device, without issue.
Now you are done, enjoy. If you screwed up, and got a security warning contact me, don't stress. Then again, don't screw up.
Non root users wanting to return to 1.12.605.6 (Stock, pre OTA) can continue below:
NOT FOR ROOT USERS
Taken from AndroidPolice: [Tutorial] How To "Un-Root" The HTC ThunderBolt And Return It To Stock. Please check the site out.
One of the most popular questions about rooting the ThunderBolt is how to undo the process and return to stock, which renews your eligibility for customer support. Well, here you go:
Instructions:
Please read the whole tutorial first, and pay attention to every detail. Note that your battery needs to be charged to at least 40% at the beginning of the process, and remember to check the MD5 sums of all downloaded files before diving in. As always, neither Android Police nor Team AndIRC are responsible for any damage this may cause to your phone, and, needless to say, returning to stock means you will no longer be able to use root apps like ShootMe and Titanium Backup.
First, download the following files:
Stock firmware (MD5 sum: 7141f5620f6128af77d50587e341f4b0)
exploits.zip (MD5 sum: 3b359efd76aac456ba7fb0d6972de3af)
Next, push exploits.zip and misc.img.
To gain root and flash misc.img:
If the output is anything other than "c88dd947eb3b36eec90503a3525ae0de," stop and start over again.
Now let’s write misc.img:
Rename "PG05IMG_Mecha_VERIZON_WWE_1.12.605.6_Radio_1.16.00.0223r_NV_8k_1.41_9k_1.64_
release_174685_signed.zip" to "PG05IMG.zip" before placing it on your SD card.
Finally, reboot into bootloader mode by entering the following command. Allow the stock firmware to flash.
You’re done – your phone should now be stock, S-ON.
Rooted Users (Non - Root Users scroll down below):
MR1 RUU
http://www.multiupload.com/KU7GSF2EY0
PG05IMG_MR1_no_hboot.zip - c64b4367086fff4f51ec3d5d766a0456
Bootloader (FLASH THIS LAST) FLASHING THIS WITHOUT SUCESSFULLY FLASHING THE ABOVE FILE WILL CAUSE A SECURITY WARNING
http://www.multiupload.com/26WG1UZCXR
abda920f3e159fb05c00d8c54a5b8768 - PG05IMG_hboot_1.4.0000.zip
Flash the above PG05IMG_MR1_no_hboot.zip to restore everything to stock + OTA BUT still will have the s-off bootloader.
Rename PG05IMG_MR1_no_hboot.zip as PG05IMG.zip, and flash through hboot (like in the root guide).
To restore the bootloader, rename PG05IMG_hboot_1.4.0000.zip as PG05IMG.zip and flash through the bootloader. DO NOT FLASH THIS unless you are absolutely sure PG05IMG_MR1_no_hboot.zip flashed to your device, without issue.
Now you are done, enjoy. If you screwed up, and got a security warning contact me, don't stress. Then again, don't screw up.
Non root users wanting to return to 1.12.605.6 (Stock, pre OTA) can continue below:
NOT FOR ROOT USERS
Taken from AndroidPolice: [Tutorial] How To "Un-Root" The HTC ThunderBolt And Return It To Stock. Please check the site out.
One of the most popular questions about rooting the ThunderBolt is how to undo the process and return to stock, which renews your eligibility for customer support. Well, here you go:
Instructions:
Please read the whole tutorial first, and pay attention to every detail. Note that your battery needs to be charged to at least 40% at the beginning of the process, and remember to check the MD5 sums of all downloaded files before diving in. As always, neither Android Police nor Team AndIRC are responsible for any damage this may cause to your phone, and, needless to say, returning to stock means you will no longer be able to use root apps like ShootMe and Titanium Backup.
First, download the following files:
Stock firmware (MD5 sum: 7141f5620f6128af77d50587e341f4b0)
exploits.zip (MD5 sum: 3b359efd76aac456ba7fb0d6972de3af)
Next, push exploits.zip and misc.img.
Code:
adb push misc.img /data/local/
adb push busybox /data/local/
adb shell chmod 777 /data/local/busybox
To gain root and flash misc.img:
Code:
adb shell
su
/data/local/busybox md5sum /data/local/misc.img
If the output is anything other than "c88dd947eb3b36eec90503a3525ae0de," stop and start over again.
Now let’s write misc.img:
Code:
dd if=/data/local/misc.img of=/dev/block/mmcblk0p17
Rename "PG05IMG_Mecha_VERIZON_WWE_1.12.605.6_Radio_1.16.00.0223r_NV_8k_1.41_9k_1.64_
release_174685_signed.zip" to "PG05IMG.zip" before placing it on your SD card.
Finally, reboot into bootloader mode by entering the following command. Allow the stock firmware to flash.
Code:
adb reboot bootloader
You’re done – your phone should now be stock, S-ON.
Last edited: