[NEW METHOD]Root SGAP GT-S7500[GUIDE][UPDATED]

Search This thread

kk9999gada

Senior Member
Install CWM 5.5.0.4, Root, BusyBox & Init.d Support(NEW METHOD)
Samsung Galaxy Ace Plus (GT-S7500)

Requirements :
  1. Odin3 Flash Program
  2. CWM Package
  3. SuperSU Package
  4. BusyBox.zip
  5. Windows PC
  6. Samsung Drivers Installed (Get from Here If not installed)
  7. GT-S7500 only

Disclaimer:
  1. Make Sure you have GT-S7500 only and no other variant.
  2. Make Sure you are ready with all the stuffs mentioned above
  3. You are Doing all this at your own risk
  4. No developer will be responsible if you Brick your device

CWM Procedure:
  1. Download all the things Mentioned Above
  2. Extract Odin3.zip
  3. Extract cwm-trebon.zip and place it inside Odin3 folder
  4. Copy UPDATE-SuperSU-vx.xx.zip and Busybox.zip to root of External SD of your Phone
  5. Now Open Odin3 v1.85.exe
  6. Check Auto Reboot, F. Reset Time & PDA only
  7. Uncheck everything that is not mentioned above
  8. Now Click on PDA and select cwm-trebon.tar.md5
  9. Boot your Phone in Download Mode by Pressing Volume Down Key + Home Key + Power Button together
  10. Now Press Volume Up to Continue
  11. Now the Phone is Ready to be connected to PC
  12. Connect your Phone to PC
  13. Odin3 will detect your Phone and The Box will turn yellow
  14. Now Recheck whether every thing mentioned above is done or not
  15. Now hit Start Button to begin Flashing
  16. After flashing is done the phone will reboot
  17. Now the CWM is installed
  18. Now follow Rooting Procedure

Rooting + BusyBox Procedure:
  1. Boot your Phone in CWM mode by Pressing Volume Up Key + Volume Down Key + Home Key + Power Button together
  2. Now in CWM navigate to Install Zip From SDcard using Volume Keys
  3. Now Select Choose Zip from SDcard by pressing Home Key
  4. Now select UPDATE-SuperSU-vx.xx.zip
  5. Select Yes to Install
  6. Now select BusyBox.zip
  7. Select Yes to Install
  8. After Install is done Reboot Your Phone
  9. Now you are Rooted with Init.d Support

Note :
  1. The Yellow Triangle at boot doesn't matter You can remove it by Using Triangle Away App from Here
    (GUIDE FOR TRIANGLE AWAY ON MY FAQ THREAD)
  2. Don't forget to Visit This FAQ thread
Credits :
mb-14
Chainfire
 

Attachments

  • Odin3.zip
    194.6 KB · Views: 17,284
  • cwm-trebon.zip
    4.6 MB · Views: 44,894
  • Odin.jpg
    Odin.jpg
    36.7 KB · Views: 4,030
  • Busybox.zip
    1.3 MB · Views: 25,412
  • UPDATE-SuperSU-v1.86.zip
    1.1 MB · Views: 12,593
Last edited:

kk9999gada

Senior Member
I have a question. After this root, stock recovery will be replaced by CWM. So is it possible to go back to stock recovery after rooting?? And If it is possible then will be noticeable by samsung if I go to samsung care??
I'm new in rooting....

Yes, You can go back to stock recovery any time you want, just flash stock rom and you will also be unrooted.
 
  • Like
Reactions: AmanMehndiratta

Jayadratha Mondal

Senior Member
Jun 15, 2013
136
17
Kolkata
Flashing and installing new roms from CWM is different??

Flashing and installing new roms from CWM is different?? I mean in case of installing from CWM, no flashing occurs?? May be its a dump like question but please answer..

1. I want to know the differences between flashing and installing roms from CWM

2. All are those attached files latest versions? i.e CWM, busybox & SuperSU?
 
Last edited:

kk9999gada

Senior Member
Flashing and installing new roms from CWM is different?? I mean in case of installing from CWM, no flashing occurs?? May be its a dump like question but please answer.. I want to know the differences between flashing and installing roms from CWM

We flash Stock Rom using Odin and We install Custom Rom using CWM.

Flashing Stock Rom using Odin includes the whole firmware of our phone including Stock Recovery And Installing Custom Rom from CWM includes Only System folder and kernel.
 

Jayadratha Mondal

Senior Member
Jun 15, 2013
136
17
Kolkata
We flash Stock Rom using Odin and We install Custom Rom using CWM.

Flashing Stock Rom using Odin includes the whole firmware of our phone including Stock Recovery And Installing Custom Rom from CWM includes Only System folder and kernel.

Ok both odin and CWM flashes the NAND memory then??
& all are those attached files latest versions? i.e CWM, busybox & SuperSU? Or I can get more latest versions of those files.?
 
Last edited:

Bassel Bakr

Senior Member
May 31, 2013
252
369
Cairo
When I flashed CWM now its shows a yellow triangle. So is it necessary to remove using the app before installing custom rom of yours or do that after rom installation???

Sent from my GT-I9300 using xda premium

It's not necessary to remove it, however, it's better to do so before any rom installation (just in case your rom installation went wrong and you needed to take your phone to samsung care/service center). :)
 

MoHuToP

Senior Member
Aug 7, 2009
393
111
Sofia
Hello guys. One question - why after this rooting, my wifi ability just gone? I can find a wireless networks, i can apply the password, but i can see only "Obtaining IP address..." ?
 

MoHuToP

Senior Member
Aug 7, 2009
393
111
Sofia
The problem must be in connection. It is not due to rooting.

Yes, it looks like bad wireless home network. Thanks for the info!

The method is easy and well constructed, but I want to add something else:
I think is better to add in step 4 - Copy SuperSU-v1.25.zip and BusyBox.zip to root of External SD of your Phone
Newbies will avoid to turn off their devices.


+1 thanks or thumbs up or etc. for ya ; )
 
  • Like
Reactions: kk9999gada

aronxda

Member
Jul 28, 2013
7
0
Odin has two yellow box and hanging at setup connection

Install CWM 5.5.0.4, Root, BusyBox & Init.d Support(NEW METHOD)
Samsung Galaxy Ace Plus (GT-S7500)

Requirements :
  1. Odin3 Flash Program
  2. CWM Package
  3. SuperSU Package
  4. BusyBox.zip
  5. Windows PC
  6. GT-S7500 only

Pre-Requisites:
  1. Don't forget to install drivers before doing anything
  2. Make Sure you have GT-S7500 only and no other variant.
  3. Make Sure you are ready with all the stuffs mentioned above
  4. You are Doing all this at your own risk
  5. No developer will be responsible if you Brick your device

CWM Procedure:
  1. Download all the things Mentioned Above
  2. Extract Odin3.zip
  3. Extract cwm-trebon.zip and place it inside Odin3 folder
  4. Copy SuperSU-v1.25.zip and Busybox.zip to root of External SD of your Phone
  5. Now Open Odin3 v1.85.exe
  6. Check Auto Reboot, F. Reset Time & PDA only
  7. Uncheck everything that is not mentioned above
  8. Now Click on PDA and select cwm-trebon.tar.md5
  9. Boot your Phone in Download Mode by Pressing Volume Down Key + Home Key + Power Button together
  10. Now Press Volume Up to Continue
  11. Now the Phone is Ready to be connected to PC
  12. Connect your Phone to PC
  13. Odin3 will detect your Phone and The Box will turn yellow
  14. Now Recheck whether every thing mentioned above is done or not
  15. Now hit Start Button to begin Flashing
  16. After flashing is done the phone will reboot
  17. Now the CWM is installed
  18. Now follow Rooting Procedure

Rooting + BusyBox Procedure:
  1. Boot your Phone in CWM mode by Pressing Volume Up Key + Volume Down Key + Home Key + Power Button together
  2. Now in CWM navigate to Install Zip From SDcard using Volume Keys
  3. Now Select Choose Zip from SDcard by pressing Home Key
  4. Now select SuperSU-v1.25.zip
  5. Select Yes to Install
  6. Now select BusyBox.zip
  7. Select Yes to Install
  8. After Install is done Reboot Your Phone
  9. Now you are Rooted with Init.d Support

Note :
  1. The Yellow Triangle at boot doesn't matter You can remove it by Using Triangle Away App from Here
  2. Don't forget to Visit This FAQ thread
Credits :
mb-14
Chainfire

Hi kk9999gada
Odin is hanging at Setup connection. I tried all solutions mentioned on this forum and google and tried different Odin versions but still no luck.
could u plz suggest some way or any other replacement of odin. I am new to rooting and very excited to do and worked very hard to resolve that setup connection issue but couldn't find any way yet ... :(...

one more thing :confused: i noticed that i can see two yellow box in Odin after connecting my mobile to PC 0:COM22 and 1:COM16 .. is it usual.. i saw many screenshot on this forum no one show 2 yellow box.... this happens when i 1st start Odin then connect phone to pc but when i connect phone to pc 1st and then start Odin then only one yellow box is visible that is 0:COM22...please suggest....
 

kk9999gada

Senior Member
Hi kk9999gada
Odin is hanging at Setup connection. I tried all solutions mentioned on this forum and google and tried different Odin versions but still no luck.
could u plz suggest some way or any other replacement of odin. I am new to rooting and very excited to do and worked very hard to resolve that setup connection issue but couldn't find any way yet ... :(...

one more thing :confused: i noticed that i can see two yellow box in Odin after connecting my mobile to PC 0:COM22 and 1:COM16 .. is it usual.. i saw many screenshot on this forum no one show 2 yellow box.... this happens when i 1st start Odin then connect phone to pc but when i connect phone to pc 1st and then start Odin then only one yellow box is visible that is 0:COM22...please suggest....

Please don't Quote the whole OP it is against xda rules.

You should boot in download mode in order to flash anything via Odin.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 36
    Install CWM 5.5.0.4, Root, BusyBox & Init.d Support(NEW METHOD)
    Samsung Galaxy Ace Plus (GT-S7500)

    Requirements :
    1. Odin3 Flash Program
    2. CWM Package
    3. SuperSU Package
    4. BusyBox.zip
    5. Windows PC
    6. Samsung Drivers Installed (Get from Here If not installed)
    7. GT-S7500 only

    Disclaimer:
    1. Make Sure you have GT-S7500 only and no other variant.
    2. Make Sure you are ready with all the stuffs mentioned above
    3. You are Doing all this at your own risk
    4. No developer will be responsible if you Brick your device

    CWM Procedure:
    1. Download all the things Mentioned Above
    2. Extract Odin3.zip
    3. Extract cwm-trebon.zip and place it inside Odin3 folder
    4. Copy UPDATE-SuperSU-vx.xx.zip and Busybox.zip to root of External SD of your Phone
    5. Now Open Odin3 v1.85.exe
    6. Check Auto Reboot, F. Reset Time & PDA only
    7. Uncheck everything that is not mentioned above
    8. Now Click on PDA and select cwm-trebon.tar.md5
    9. Boot your Phone in Download Mode by Pressing Volume Down Key + Home Key + Power Button together
    10. Now Press Volume Up to Continue
    11. Now the Phone is Ready to be connected to PC
    12. Connect your Phone to PC
    13. Odin3 will detect your Phone and The Box will turn yellow
    14. Now Recheck whether every thing mentioned above is done or not
    15. Now hit Start Button to begin Flashing
    16. After flashing is done the phone will reboot
    17. Now the CWM is installed
    18. Now follow Rooting Procedure

    Rooting + BusyBox Procedure:
    1. Boot your Phone in CWM mode by Pressing Volume Up Key + Volume Down Key + Home Key + Power Button together
    2. Now in CWM navigate to Install Zip From SDcard using Volume Keys
    3. Now Select Choose Zip from SDcard by pressing Home Key
    4. Now select UPDATE-SuperSU-vx.xx.zip
    5. Select Yes to Install
    6. Now select BusyBox.zip
    7. Select Yes to Install
    8. After Install is done Reboot Your Phone
    9. Now you are Rooted with Init.d Support

    Note :
    1. The Yellow Triangle at boot doesn't matter You can remove it by Using Triangle Away App from Here
      (GUIDE FOR TRIANGLE AWAY ON MY FAQ THREAD)
    2. Don't forget to Visit This FAQ thread
    Credits :
    mb-14
    Chainfire
    4
    2
    I have a question. After this root, stock recovery will be replaced by CWM. So is it possible to go back to stock recovery after rooting?? And If it is possible then will be noticeable by samsung if I go to samsung care??
    I'm new in rooting....
    2
    Flashing and installing new roms from CWM is different?? I mean in case of installing from CWM, no flashing occurs?? May be its a dump like question but please answer.. I want to know the differences between flashing and installing roms from CWM

    We flash Stock Rom using Odin and We install Custom Rom using CWM.

    Flashing Stock Rom using Odin includes the whole firmware of our phone including Stock Recovery And Installing Custom Rom from CWM includes Only System folder and kernel.
    1
    Nice work pawan ! ;)