[Q] cant install android 4.4 on my defy plus

Search This thread
By:
Advanced…
V

vaibhavm

Member
Jan 21, 2014
6
0
Hi,

My phone detail --

MB526, have android 4.1.2 and have rom -CM-X MIG 2.02


I have two issues :-

1. my wifi disconnects after some time and i have to disable it for long time and then enable it to work ,so any way to solve it -on my other phone
there is no issue about wifi atall.

2.I been trying to install kitkat 4.4 on my defy plus but always fails to do in recovery with message like this:--

error in /sdcard/.....zip, installation aborted"

tried both recoveries but now on touch TWRP -- any idea ?


Thanks
 
I

imdroid87

Member
Jan 17, 2014
17
1
vaibhavm said:
Hi,

My phone detail --

MB526, have android 4.1.2 and have rom -CM-X MIG 2.02


I have two issues :-

1. my wifi disconnects after some time and i have to disable it for long time and then enable it to work ,so any way to solve it -on my other phone
there is no issue about wifi atall.

2.I been trying to install kitkat 4.4 on my defy plus but always fails to do in recovery with message like this:--

error in /sdcard/.....zip, installation aborted"

tried both recoveries but now on touch TWRP -- any idea ?


Thanks
Click to expand...
Click to collapse


I tooo faced the same problem at the beginning with cm11 (cm-11-20140117-NIGHTLY-mb526) by quarx, though I was able to install cm11(cm-11-20131229-NIGHTLY-mb526) by quarx successfully.... Im a noob to this flashing stuff still managed and understood a bit of this procedure... I believe I read this some where on this forum that if you want to install ***cm11 (cm-11-20140117-NIGHTLY-mb526)*** then you need to go back to the custom rom first then from there you can install , though I'm not 100% Sure and afraid to do any experimentation with my Defy+.... As of now Im on
"Android 4.3.1"
Kernel 2.6.32.9-Aerokernel
10.2-20131030-NIGHTLY-mb526

I am facing almost the same problems as yours "Installation failed" as if there is a problem with the zip file which I'm sure of that isnt the case :/

Please somebody help the noobs...!!!


Thank you.
 
B

becer

Member
Aug 31, 2010
11
5
Warsaw
imdroid87 said:
Yes I did the recovery Update and then rebooted and then tried installing cm11 (cm-11-20140117-NIGHTLY-mb526) but unfortunately it failed "Aborted" :(:confused:
Click to expand...
Click to collapse

Try maybe installing from scratch (starting with original sbf).
I reinstalled Kitkat on my Defy+ tonight - sbf, rooted sbf, 2ndInit, cm-10-20131030, recovery update and then 140120.
 
  • Like
Reactions: imdroid87
I

imdroid87

Member
Jan 17, 2014
17
1
becer said:
Try maybe installing from scratch (starting with original sbf).
I reinstalled Kitkat on my Defy+ tonight - sbf, rooted sbf, 2ndInit, cm-10-20131030, recovery update and then 140120.
Click to expand...
Click to collapse

Buddy "becer" can u please guide me step wise to go back to the Stock Rom then 2init what ever it is I dont understand a thing :confused:


I know what stock Rom is but don't know how to degrade to the stock rom from 4.3.1 and how to install this 2init thing :confused:

would be a great help if you could guide me through the procedure step wise

Thank You.
 
I

imdroid87

Member
Jan 17, 2014
17
1
cyrusct82 said:
1. root with Framaroot http://xdaforums.com/showthread.php?p=37508806
2. Install 2nd init http://xdaforums.com/showthread.php?p=12837303
3. Update recovery with this http://xdaforums.com/showthread.php?p=48501247
4. Install CM11


Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse

Buddy Im already running cyanogenmod on my defy+ and in the second link what you gave for installing the 2ndinit Recovery it says:

DO NOT INSTALL THIS IF ARE YOU ALREADY RUNNING CYANOGENMOD. That ROM already has bootmenu pre-installed, and you'll probably end up having to flash an SBF file to recover your phone.

NOTE: You need ROOT installed on your Defy to use this application.


What should I do ???:confused:
 
V

vaibhavm

Member
Jan 21, 2014
6
0
I will try from start by using original sbf file using RSD and then CM11 and updating recovery after that Kitkat ,btw can you mention which ROM you tried because i tried these 2 earlier --> omni-4.4.2-20140117-mb526-HOMEMADE .zip and AOSPA 4.0+ PARANOIDANDROID [beta]
Kitkat 4.4.2 KOT49H android-4.4.2_r1.

Also can some1 help me with my wifi frequently disconnection problem too please .
 
I

imdroid87

Member
Jan 17, 2014
17
1
vaibhavm said:
I will try from start by using original sbf file using RSD and then CM11 and updating recovery after that Kitkat ,btw can you mention which ROM you tried because i tried these 2 earlier --> omni-4.4.2-20140117-mb526-HOMEMADE .zip and AOSPA 4.0+ PARANOIDANDROID [beta]
Kitkat 4.4.2 KOT49H android-4.4.2_r1.

Also can some1 help me with my wifi frequently disconnection problem too please .
Click to expand...
Click to collapse



I tried this

Mokee
"MK43.1-jordanplus-201312040138-NIGHTLY"
with Gapps
gapps-jb+-20130730_defy-minimal


and

update-recovery
CM11 by Quarx
"cm-11-20131229-NIGHTLY-mb526"
with Gapps
1-16_GApps_Standard_4.4.2_signed


They both worked for me but unable to install the latest one.... I'm trying the method just mentioned by the senior member but unable to root again using framaroot as its showing me this error

"Half-Success :-/ ... system partition is read-only, use local.prop trick. Reboot your device and use adb to see if it run as root"

I don't know what to do now :silly:
 
V

vaibhavm

Member
Jan 21, 2014
6
0
imdroid87 said:
I tried this

Mokee
"MK43.1-jordanplus-201312040138-NIGHTLY"
with Gapps
gapps-jb+-20130730_defy-minimal


and

update-recovery
CM11 by Quarx
"cm-11-20131229-NIGHTLY-mb526"
with Gapps
1-16_GApps_Standard_4.4.2_signed


They both worked for me but unable to install the latest one.... I'm trying the method just mentioned by the senior member but unable to root again using framaroot as its showing me this error

"Half-Success :-/ ... system partition is read-only, use local.prop trick. Reboot your device and use adb to see if it run as root"

I don't know what to do now :silly:
Click to expand...
Click to collapse


Mine sbf is rooted alredy so maybe try it first then go to CM10 .
its DEFYPLUS_U3_4.5.1-134_DFP-231_CEE_ROOTED_No_Signed.rar
downloaded it earlier from here only.
 
B

becer

Member
Aug 31, 2010
11
5
Warsaw
I have tried Mokee, but direct return to Quarx compilation made big stability problems too. Solution was to flash with original rom, then rooted one, 2ndInint and Quarx cm10, then cm11.

As I had Android 2.3.6 (3.4.5.1 - 231), I used these roms - http://xdaforums.com/showthread.php?t=1542956.
It is very important to wipe data and cache just after first, original flash - otherwise you will have infinite boot loop and cannot run phone.

Look at http://xdaforums.com/showthread.php?t=966537 too.
 
I

imdroid87

Member
Jan 17, 2014
17
1
becer said:
I have tried Mokee, but direct return to Quarx compilation made big stability problems too. Solution was to flash with original rom, then rooted one, 2ndInint and Quarx cm10, then cm11.

As I had Android 2.3.6 (3.4.5.1 - 231), I used these roms - http://xdaforums.com/showthread.php?t=1542956.
It is very important to wipe data and cache just after first, original flash - otherwise you will have infinite boot loop and cannot run phone.

Look at http://xdaforums.com/showthread.php?t=966537 too.
Click to expand...
Click to collapse



Im phone is f***** :eek:, what I did is install this framaroot and installed rootchecker..... I tried to do the rooting using "installsu" and then clicked Gilmo and it gave me this message:

“Half-Success :-/ … system partition is read-only, use local.prop trick. Reboot your device and use adb to see if it runs as root”

then I restarted my phone and check with root checker and found its saying its saying Root access successful and then I wondered which I suppose I shudnt have wondered :crying: to user framaroot and do the "unroot" and again restarted , and now after restart I tried to do the regular thing wipe cache ,Dalvik , Data and the phone is not even mounting them its sayin
E: Can't mount /cache/recovery/command etc

Im able to open the android 4.1.2 (Jb - quarx)
but not able to install a thing in my internal memory coz I messed up bad with the partition table bad:crying:
I tried to fix it through this
http://xdaforums.com/showthread.php?t=1759558&highlight=status+0

but no luck :/
 
V

vaibhavm

Member
Jan 21, 2014
6
0
I been able to flash and run cm-10.2-20140120-NIGHTLY-mb526.zip thts-- android 4.3 ,so do factory reset and go here http://quarx2k.ru/roms/defy-cm10.2/ --get latest build .

my problem is only wifi disconnects frequently -seems on this working fine ,will check it for few days ,anyway 4.4 will still have bugs so better be on some lower version.
 
I

imdroid87

Member
Jan 17, 2014
17
1
vaibhavm said:
I been able to flash and run cm-10.2-20140120-NIGHTLY-mb526.zip thts-- android 4.3 ,so do factory reset and go here http://quarx2k.ru/roms/defy-cm10.2/ --get latest build .

my problem is only wifi disconnects frequently -seems on this working fine ,will check it for few days ,anyway 4.4 will still have bugs so better be on some lower version.
Click to expand...
Click to collapse


Oooh in that case even if I can install the latest Cm11 by Quarx then I should not be doing it as the problem your saying about the wifi getting disconnecting frequently is not acceptable :silly:
anyways just fighting with my Defy+ as of now , Installing the Stock sbf on it as I bricked the phone :rolleyes:

So the new Question arises what CM version is more stable or can I ask whose performance is Better in terms of speed.... As I don't mind with Features but I dont want Lags.... Previously I installed 4.2.1 I Suppose and installed the mininal gapps and was have around 240mb free of RAM...
is that good ???

Thank you for the responses buddies :):fingers-crossed:
 
I

imdroid87

Member
Jan 17, 2014
17
1
imdroid87 said:
Oooh in that case even if I can install the latest Cm11 by Quarx then I should not be doing it as the problem your saying about the wifi getting disconnecting frequently is not acceptable :silly:
anyways just fighting with my Defy+ as of now , Installing the Stock sbf on it as I bricked the phone :rolleyes:

So the new Question arises what CM version is more stable or can I ask whose performance is Better in terms of speed.... As I don't mind with Features but I dont want Lags.... Previously I installed 4.2.1 I Suppose and installed the mininal gapps and was have around 240mb free of RAM...
is that good ???

Thank you for the responses buddies :):fingers-crossed:
Click to expand...
Click to collapse



vaibhavm I have installed this 4.4.2 Android Panroid
http://xdaforums.com/showthread.php?t=2576930
[AOSPA 4.4.2 KOT49H] [Beta] Defy(+) PARANOIDANDROID 4.0+ [18/01/2014]

Working awesome fast and seems stable until now and I have gone through some reviews about it on defy+ on that forum even they are giving it positive reviews..
Check it out for sure:D:good::fingers-crossed:
 
You must log in or register to reply here.

Similar threads

L
Defy MINI xt320: ROOT?
Replies
1K
Views
520K
krule031
krule031
C
  • Sticky
[ANSWER] Does my Defy have a RED or a Green lens?
Replies
90
Views
199K
walter79
walter79
janeindiran
Is your DEFY/DEFY+ bricked??
Replies
470
Views
130K
S
Shinoks
M
USB Host mode on Defy
Replies
158
Views
100K
lohtse
lohtse
unrafa
[Q] Is there any Real Time Voice changer in phone calls??
Replies
40
Views
284K
A
Aleplus

Top Liked Posts

24 Hours All time

New posts