[GUIDE] How to flash ICS 3.33 firmware | flash/update ARHD ICS ROM

Search This thread
By:
Advanced…
banderz777

banderz777

Senior Member
Jan 14, 2012
199
30
60
Muskegon,MI
Thanks

Just wanted to thank you for the good guide to installing ICS on the Sensation...
I could not wait any longer so I went and installed ICS Sense 4.0 and I am loving it, so way did I wait so long.... maybe I was an idiot. LOL
 
H

harky

Senior Member
Jun 14, 2008
575
6
Singapore
hi,
i flashed to this rom...Android Revolution HD™ 6.5.5 | ICS
can i check how do i flash back to stock rom??
using stock RUU will do?
 
joaquinf

joaquinf

Senior Member
Sep 17, 2010
2,844
2,327
Bucaramanga
Last edited:
W

Watevah

Senior Member
Nov 16, 2010
52
4
Thank you!

Thanks bro, awesome guide. Everything went flawlessly on my friend's Sensation.
 
X

xride09

New member
Apr 4, 2012
1
0
HTC sensation rom HELP !

HI
i just installed to the insert coin rom and it installed correctly. however it keeps rebooting? what shall i do? PLEASE I REALLY NEED HELP FROM THE COMMUNITY, IT WILL BE MUCH APPRECIATED, THANKS
 
r.king35

r.king35

Senior Member
Jun 15, 2010
426
59
Can someone tell me if it will make a difference in the boot up screen my screen says LOCKED and not REVOLUTIONARY. If it is locked can i still install the rom as per the thread if my phone is s-off'd and hboot 1.27 and perm rooted etc.
 
T

trkaaa

Senior Member
Feb 13, 2010
924
895
r.king35 said:
Can someone tell me if it will make a difference in the boot up screen my screen says LOCKED and not REVOLUTIONARY. If it is locked can i still install the rom as per the thread if my phone is s-off'd and hboot 1.27 and perm rooted etc.
Click to expand...
Click to collapse

  • Flash ICS Firmware 3.32 again ( for ARHD 6.4 , 6.5 , .6.6 ) to replace that locked hboot 1.27 with the unlocked hboot 1.27 ( to be able to use fastboot commands later on )
 
H

henrylar

Senior Member
Feb 8, 2008
211
41
trkaaa said:
  • Usually flashing ARHD 6.5 is for S-OFF devices
  • you should of done S-OFF before updating to ICS , revolutionary don't support hboot 1.27 yet
  • if you want S-OFF , then watch for this thread http://xdaforums.com/showthread.php?t=1522351 for a new method to S-OFF ICS devices as they say , wait for their beta and decide for yourself
  • anyway , there is a method to flash ARHD on S-ON devices if you want to do it until S-OFF method for your case is issued
  • for flash ARHD on S-ON , follow the title "Flash custom roms " in my Post [FONT=&quot]here , Basically it uses htc dev to unlock bootloader and instal custom rom and flash the boot.img for the saame rom through fastboot[/FONT]
Click to expand...
Click to collapse

Thank you very much, trkaa, it was an extremely helpful answer, and difficult to find elsewhere. I hope others will find your answer as well, because there is a lot of crap out there about this. I have now been reading a lot, and I see what you mean - I should have s-off'ed it before I accepted the upgrade. So now I have to wait for the new S-OFF method, that will hopefully come. Just one more question: I cannot really understand what options I have and what problems I run into if I go for your third option, flashing ARHD on S-ON. I can see all the problems with the HTC dev unlock, and I am not sure that I will go that route. What I am unsure about is, can I install ARHD 6.6 and/ or the gingerbread editions as I like after htc dev unlock, or should I expect a variety of problems? Maybe no one can really tell the problems I might run into with hboot 1.27000 yet?
 
T

trkaaa

Senior Member
Feb 13, 2010
924
895
henrylar said:
Thank you very much, trkaa, it was an extremely helpful answer, and difficult to find elsewhere. I hope others will find your answer as well, because there is a lot of crap out there about this. I have now been reading a lot, and I see what you mean - I should have s-off'ed it before I accepted the upgrade. So now I have to wait for the new S-OFF method, that will hopefully come. Just one more question: I cannot really understand what options I have and what problems I run into if I go for your third option, flashing ARHD on S-ON. I can see all the problems with the HTC dev unlock, and I am not sure that I will go that route. What I am unsure about is, can I install ARHD 6.6 and/ or the gingerbread editions as I like after htc dev unlock, or should I expect a variety of problems? Maybe no one can really tell the problems I might run into with hboot 1.27000 yet?
Click to expand...
Click to collapse

  • thank you , just trying to help

  1. to answer your question , htc dev don't allow flashing of firmware ( like 3.32 or 1.17 , ...etc ) , it just unlocks few bootloader options not all of them
  2. this means that whatever firmware given to you by ICS OTA will not be changed ( i.e for example your software number in about phone says 3.32.x.x )
  3. so if you use htc dev , you have to install cutom rom that are based on 3.32 firmware only ( because that is your existing software as the above example ) , not a higher firmware version" i guess , not sure for higher versions " if it is issued in future , or a lower firmware like GB
  4. this means also you will not be able to install GB custom rom or RUU

Conclusion

  1. my advise is to wait for solution , if it is a matter of a week or two
  2. if solution don't come , you can either stay on the OTA or install any ICS Custom Rom ( with the same base as your OTA )
  3. note that almost same bugs exist in both OTA and custom roms ,so no big difference ( except for SU APK's )
  4. if you decided to install ARHD ( i recommend that rom ) , so make sure in about phone your software version is 3.32.x.x , and you will not need to flash firmware ( because it is already flashed by the OTA ) , this rom is reported flashed by one member using htc dev ( he is your same case )
  5. you can install any other ICS custom rom with the same firmware base
  6. it is your choice to make
 
Last edited:
  • Like
Reactions: henrylar
H

henrylar

Senior Member
Feb 8, 2008
211
41
Thank you. I think I will patiently wait for the S-OFF option that hopefully will come to surface. My experience with ARHD on my previous Desire HD makes the option of using that attractive, however.
But, just to be sure, with the htc dev procedure I will not be able to install the AHRD XE version with the end number 3.32.401.105 on my plain Sensation, because that is a different firmware? In the end, if the only difference is Beats Audio I wouldn,t care anyway.
 
Last edited:
T

trkaaa

Senior Member
Feb 13, 2010
924
895
henrylar said:
Thank you. I think I will patiently wait for the S-OFF option that hopefully will come to surface. My experience with ARHD on my previous Desire HD makes the option of using that attractive, however.
But, just to be sure, with the htc dev procedure I will not be able to install the AHRD XE version with the end number 3.32.401.105 on my plain Sensation, because that is a different firmware? In the end, if the only difference is Beats Audio I wouldn,t care anyway.
Click to expand...
Click to collapse

  • the important numbers for Firmware ( Base ) are the first 2 parts 3.32 only
  • the third part 401 reflects the region and / or specific carrier
  • the fourth number reflects model of device 5 is for sensation , 105 is sensation XE
  • i think no problem for installing 3.32.401.105 ( with beats Audio ) on normal Sensation , it should install (if it has the same base as your OTA )
 
Last edited:
  • Like
Reactions: henrylar
You must log in or register to reply here.

Similar threads

mike1986.
[ROM] Android Revolution HD 7.3 | ICS | High Quality & Performance | Legendary
Replies
81K
Views
16M
Ulumia
Ulumia
baadnewz
[ROM]InsertCoin 6.0.0 Ice Cream Sandwich 4.0.3 EPIC ROM | 3.33.401.6
Replies
7K
Views
1M
rzr86
rzr86
baadnewz
  • Locked
Please delete
Replies
18K
Views
3M
dexter93
dexter93
shnizlon
[ROM][Sense 4.0][FINISHED] OrDroid 9.0.0 | EQS | APM | Tweaks | Fast & Stable
Replies
17K
Views
3M
dodge67
dodge67
rmk40
[ROM][04/26/12] Virtuous Inquisition v4.0.2 :: AOSP-Experience Senseless ICS (4.0.3)
Replies
12K
Views
2M
M
materijalmen

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 254
    joaquinf
    joaquinf
    The content in this guide will help you to update your phone with the latest firmware from 3.33.xxx.x RUU and flash/update the latest version of Android Revolution HD (ARHD) Ice Cream Sandwich ROM.
    • If you want to update your firmware and flash ARHD, please follow post#1 and post#2 in this thread.
    • If you just want to update to the 3.33 firmware, please follow post#1 in this thread. This is a general guide and can be applied to flash any ICS 3.33-based rom afterwards.
    • If you want to flash/update the latest version of ARHD and you are coming from a previous 3.32-based version of ARHD (>6.4.0) or a different 3.33-based ROM, please follow post#2 in this thread.
    About S-ON / S-OFF and Hboot version​
    Please follow the instructions according to your Bootloader status (S-ON / S-OFF) and Hboot version
    The following information has been gathered and compiled from many posts and threads.
    Special thanks to: mike1986., Hawke84, Kohr-Ah, jotha, mf2112, malybru, PaulGiz, erraggy and trkaaa for their useful posts and threads in which i've based to make this guide.

    How to flash the ICS 3.33 firmware​

    Readme first
    1. There is no need to flash the radio. It is already included in the firmware package. (radio included: 11.76A.3504.00P_11.24A.3504.31_M)
    2. Check MD5 Checksum of every file before flashing it. MD5 Checker tool: Download the file, unzip it and follow the instructions
    3. CAUTION: This procedure can brick your phone. Please make sure you've read, understood everything and know how to do it before you continue.
    4. Please make sure your battery is fully charged before start flashing.
    5. As a precautionary measure, remove the sim card from the phone and keep it out during the whole process.

    Step 1. Flashing 4EXT recovery touch

    During the installation of ARHD ROM you will be asked if you want to add/flash certain features ( i.e: stock or custom kernel, TMOUS 4g support, sony bravia engine, among other things). To make those choices you need to flash 4ext recovery touch before the ROM, if you decide to flash the ROM with CMW recovery this options will not appear. 4ext recovery touch is included in ARHD by default, any other recovery will be overwriten after the installation.

    If you've decided not to flash ARHD and/or the ROM you've chosen do not require you to have 4EXT recovery touch installed, you can skip this section.

    To dowload and install the newest version of 4ext recovery TOUCH (v1.0.0.5 RC5). (thanks to madmaxx82) use one of the following methods provided:
    • First method: Your phone MUST be rooted in order to install the 4ext recovery touch. Follow the Installation guide (thanks to LarsChristian).
    • Second method: This method is only for windows users. Download the user-friendly 4EXT Recovery touch flashing tool. Check the MD5 of the zip, extract the downloaded file and read the guide inside.
      Is highly recommended to install the 4EXT Recovery Updater or 4EXT Recovery Control to keep up with the latest updates and news. Go to 4EXT thread or www.4ext.net.
    • Third method: Download this file, check the MD5 of the zip and install it following the steps 4 and 5 from post#1 in this thread.

      If you get the "CID error" you'll need to know what your CID is and manually add it to the android-info.txt file contained in the .zip, or you can do SuperCID following Step4 in this guide and repeat the process afterwards.
      NOTE: File used in third method WILL NOT install the needed 3.33 firmware in any way, only contains the recovery.img to flash 4ext recovery touch.

    Step 2. Backup your current ROM/Apps/Data
    1. Make a NANDROID backup of your current ROM.
      • Go to settings>power and untick fast boot
      • Power off phone
      • Hold volume-down + power button to boot into the bootloader
      • Select recovery
      • Wait for 4EXT recovery touch to boot
      • Go to: backup|restore>Backup>Yes
      • Wait until backup is finished
      • Reboot phone
    2. Make a backup of your apps (with titanium backup or you preferred app). This is optional
    3. Make a backup of your SMS, contacts and important data. After superwiping and flashing the ROM all of them will be gone.This is optional
      You can use either the HTC sense buit-in backup option or one of this free apps:

    Step 3. Downloading the firmware package

    Download the latest 3.33 universal firmware package (PG58IMG.zip) from here.

    Step 4. Updating the firmware

    This step is MANDATORY otherwise you ROM will not boot. Please take a look at the firmware thread so you can understand what you are about to do.
    After updating the firmware you will have the 3.33 firmware with unlocked bootloader (revolutionary hboot 1.27). Which basically means that you can use advanced fastboot commands, such as: flash new radios and splashscreens
    1. Copy the PG58IMG.zip file you've downloaded to the root of the sdcard. Root of the sd card mean that you can't put the file inside any folder. Also, you can't rename the file. Please keep the PG58IMG otherwise the bootloader won't recognize it.
    2. Power off your phone or remove the batt and put it back again.
    3. Hold volume-down + power button to boot into the bootloader
    4. Wait for the firmware package to be found and confirm to update as prompted
    5. Once it completed successfully and prompted you to reboot, pull the battery out.

    Step 5. Removing the PG58IMG.zip file from the sd card

    Now that you have updated the firmware succesfully, it is necessary to delete the PG58IMG.zip file from the sd card to gain access to the bootloader without being asked if you want to update the firmware. To do so, we have two options:

    Option#1. If you can have access to the sd card from a computer:
    1. Remove the sdcard from your phone,attach it to your computer and delete the PG58IMG.zip from the sdcard.
    2. Remove the sdcard from your computer and return it to your phone.
    3. Hold volume-down + power to boot into bootloader.
    4. Wait 10 seconds until the bootloader is fully loaded
    5. Now your bootloader screen should read:
      -Revolutionary-
      PYRAMID PVT SHIP S-OFF RL
      HBOOT-1.27.1100
      RADIO-11.24A.3504.31_M
    6. Navigate with the volume button and select recovery with the power button
    7. Wait for the recovery to boot
    8. You are good to go, now you can flash the ROM. Please follow post#2 in this thread.
    Option#2. If you can't have access to the sd card from a computer:
    1. Remove the sd card from the phone
    2. Hold volume-down + power to boot into bootloader.
    3. Wait 10 seconds until the bootloader is fully loaded
    4. Now your bootloader screen should read:
      -Revolutionary-
      PYRAMID PVT SHIP S-OFF RL
      HBOOT-1.27.1100
      RADIO-11.24A.3504.31_M
    5. Insert the sd card now
    6. Navigate with the volume button and select recovery with the power button
    7. Wait for the recovery to boot
    8. You are good to go, now you can flash the ROM. Please follow post#2 in this thread.
    9. Delete the PM58IMG.zip file from your sd card using your preferred file manager as soon as your phone has booted succesfully. You won't be able to boot into recovery normally until you delete this file. As a workaround use this method to enter into recovery mode.


    A very special thanks to all members who have contacted me with positive messages, kind words and those who asked for a way to buy me a beer. Many thanks for your appreciation and support guys.

    Donation list:
    • BrianMCollins
    • owlen
    • jonomac
    ​
    View
    79
    joaquinf
    joaquinf
    [APR.16.12] How to flash/update Android Revolution HD Ice Cream Sandwich ROM

    The content in this guide will help you to flash/update the latest version of Android Revolution HD (ARHD) Ice Cream Sandwich ROM.
    • Android Revolution HD is a custom ROM based on latest official HTC 3.33.401.x update. It is mandatory to have (at least) the 3.32 firmware (3.33 recommended) flashed on your phone or else it will not boot.
    • Please check your current ROM base number under: Settings>About Phone>Software Information>More>Build Number. If the first digits of this number are 3.32 or 3.33 then you have the proper firmware flashed and you can continue following this guide. Otherwise you need to update the firmware first, to do so, please follow post#1 in this thread. This is a general guide and can be applied to flash any ICS 3.33-based rom afterwards.
    • Android Revolution HD can be flashed in HTC Sensation, HTC Sensation 4G & HTC Sensation XE
    • You can flash either non-xe (without beats audio) or xe (with beats audio) version. Yes, the only difference is beats audio.
    About S-ON / S-OFF and Hboot version​
    Please follow the instructions according to your Bootloader status (S-ON / S-OFF) and Hboot version
    The following information has been gathered and compiled from many posts and threads.
    Special thanks to: mike1986., Hawke84, Kohr-Ah, jotha, mf2112, malybru, PaulGiz, erraggy and trkaaa for their useful posts and threads in which i've based to make this guide.

    How to flash/update Android Revolution HD v.6.7.x / 1.2.x
    Ice Cream Sandwich ROM     ​

    Readme first
    1. You need the latest 3.33 firmware installed in your phone before flashing the ROM, please follow post#1 in this thread. This is a general guide and can be applied to flash any ICS 3.33-based rom afterwards.
    2. There is no need to flash the ARHD recommended radio. It is already included in the firmware package. (radio included: 11.76A.3504.00P_11.24A.3504.31_M)
    3. Check MD5 Checksum of every file before flashing it. MD5 Checker tool: Download the file, unzip it and follow the instructions
    4. CAUTION: This procedure can brick your phone. Please make sure you've read, understood everything and know how to do it before you continue.
    5. Please make sure your battery is fully charged before start flashing.
    6. As a precautionary measure, remove the sim card from the phone and keep it out during the whole process.

    If you've followed the post#1 in this thread you already have 4EXT recovery touch installed and your data is backed up, please jump to the step3.

    If you have a previous version of ARHD installed (>6.4.0) you don't need to flash again the 4EXT Recovery touch, make sure you have the latest 3.33 firmware then jump to the step2.    ​


    Step 1. Flashing 4EXT recovery touch

    During the installation of ARHD ROM you will be asked if you want to add/flash certain features ( i.e: stock or custom kernel, TMOUS 4g support, sony bravia engine, among other things). To make those choices you need to flash 4ext recovery touch before the ROM, if you decide to flash the ROM with CMW recovery this options will not appear. 4ext recovery touch is included in ARHD by default, any other recovery will be overwriten after the installation.

    If you've decided not to flash ARHD and/or the ROM you've chosen do not require you to have 4EXT recovery touch installed, you can skip this section.

    To dowload and install the newest version of 4ext recovery TOUCH (v1.0.0.5 RC5). (thanks to madmaxx82) use one of the following methods provided:
    • First method: Your phone MUST be rooted in order to install the 4ext recovery touch. Follow the Installation guide (thanks to LarsChristian).
    • Second method: This method is only for windows users. Download the user-friendly 4EXT Recovery touch flashing tool. Check the MD5 of the zip, extract the downloaded file and read the guide inside.
      Is highly recommended to install the 4EXT Recovery Updater or 4EXT Recovery Control to keep up with the latest updates and news. Go to 4EXT thread or www.4ext.net.
    • Third method: Download this file, check the MD5 of the zip and install it following the steps 4 and 5 from post#1 in this thread.

      If you get the "CID error" you'll need to know what your CID is and manually add it to the android-info.txt file contained in the .zip, or you can do SuperCID following Step4 in this guide and repeat the process afterwards.
      NOTE: File used in third method WILL NOT install the needed 3.33 firmware in any way, only contains the recovery.img to flash 4ext recovery touch.

    Step 2. Backup your current ROM/Apps/Data
    1. Make a NANDROID backup of your current ROM.
      • Go to settings>power and untick fast boot
      • Power off phone
      • Hold volume-down + power button to boot into the bootloader
      • Select recovery
      • Wait for 4EXT recovery touch to boot
      • Go to: backup|restore>Backup>Yes
      • Wait until backup is finished
      • Reboot phone
    2. Make a backup of your apps (with titanium backup or you preferred app). This is optional
    3. Make a backup of your SMS, contacts and important data. After superwiping and flashing the ROM all of them will be gone.This is optional
      You can use either the HTC sense buit-in backup option or one of this free apps:

    Step 3. Downloading the installation files
    1. Download the Sensation superwipe script (is the same for Sensation /XE/4G users) from the ARHD OP(Thanks to mike1986.). WARNING: Use only the superwipe script for the HTC Sensation. Using a different one can brick your phone.
    2. Download the ROM from the ARHD OP (Thanks to mike1986.). You can flash either non-xe (without beats audio) or xe (with beats audio) version. Yes, the only difference is beats audio.
      • 6.6.x XE = With beats audio
      • 6.6.x = Without beats audio
      • 1.2.x = Recommended for TMOUS users. Based on the latest official HTC 3.32.531.14 (U.S. T-Mobile) firmware. Without beats audio
    3. Copy the super wipe and ROM zip files to the sdcard

    Step 4. Flashing/updating the ROM
    Note to ARHD updaters!
    • If you are coming from ARHD 6.7.x version there is no need to superwipe. Flashing the ROM without superwipe will not modify or delete your data/settings/apps/desktop layout. However, the mods you've installed will be gone and you will need to flash them again. I'd recommend to check if the mods are available/compatible with the updated ROM you are flashing to avoid future issues.
    • If you are coming from a previous 3.32-based ARHD ROM (>6.4.0) superwipe is required highly recommended!. There have been some changes and updates in the ROM since then and the best advice is to do a clean install. Please consider a superwipe to avoid issues and get the better ARHD experience.
    • If you are moving from/to the XE ROM version, superwipe isn't required but recommended. If you decide not to superwipe and you are having issues or strange behaviour please consider a superwipe to avoid issues and get the better ARHD experience.
    1. Power off phone
    2. Hold volume-down + power button to boot into the bootloader
    3. Select recovery
    4. Wait for 4EXT recovery touch to boot
    5. Select install from sd card
    6. Install the superwipe script. This will wipe ALL your data and reboot the phone into recovery again when completed.
    7. Select install from sd card again
    8. This time flash the ROM and follow the on-screen instructions
    9. During the installation you will be asked the following questions:
      • Is your device HTC Sensation 4G?. This will add wifi calling option. ONLY FOR TMOUS USERS
      • Adding sony bravia engine support?. Check out this video. Most of users haven't noticed any difference with or without the bravia engine patch. So you make your choice.
      • Flashing boot.img.
        Step 1: Select between stock kernel and custom kernel. If you have a Sensation XE and you install stock kernel your phone will run @1.5GHz because that's the stock cpu speed. If you don't have a Sensation XE your phone will run @1.2GHz.
        Step 2: Select between SebastianFM kernel and faux123 kernel. If you want to have an idea of the difference between both go to this useful post. (Thanks to PaulGiz)
    10. When the ROM is fully flashed select back
    11. Select reboot from 4ext recovery
    12. Done, enjoy ICS :D, the first boot should take around 5-10 mins

    Step 5. After flashing
    1. Before restoring or installing any app go to settings>Security>Tick unknow sources. This will allow the installation of non-Market apps.
    2. If you are going to restore any of your apps make sure you don't restore system apps or data. Just restore user apps and their data. Please read this post for a short explanation of why you shouldn't backup/restore system data.
    3. Restore your SMS backup. You must've done a backup before flashing the ROM.
      You can use either the HTC sense built-in tool or one of this free apps:
    4. There is no need to flash the recommended radio, remember? you already have it.
    5. If you want to change the radio please visit Sensation RIL and RADIO thread and follow the instructions. (Thanks to mf2112)
    6. TMOUS Users, there is something you can do to possibly improve your data speeds and connectivity. For further information please visit Sensation RIL and RADIO thread and follow the instructions. (Thanks to mf2112)
    7. Don't forget to visit Hawke84's thread ICS Problem Fixes / Mods. (Thanks to Hawke84)
    8. Please read and use the search button before posting, maybe that rare and unknown issue you are having it's already fixed or has been discussed already.
    9. If I've helped you with this guide don't forget to press the THANKS button and rate the thread :D 5 stars if possible. Thanks

    Do you want to go back to Gingerbread?

    If you want to flash a stock ROM and/or you are changing back to S-ON using a RUU and it comes up with an error please follow the second method posted here. You can also reboot your phone manually into bootloader and then run the RUU.
    To change back to S-ON please follow the STEP 5 in this guide

    If you want to flash a custom Gingerbread ROM please follow this steps:
    1. You need to flash the proper GB firmware with Hboot 1.17.
    2. Go HERE And download the 1.17 universal Firmware. This file is the original Revolutionary 1.17.1111 Firmware with a completed Gingerbread Firmware v 1.45 package (It does contain the Radio 10.14.9035.01_M). (Thanks to Kohr-Ah for the User-Friendly Firmware)
    3. Follow the same steps you've followed to upgrade the firmware, but this time with the Hboot 1.17 PG58IMG.zip file.
    4. Flash superwipe script for sensation
    5. Flash Gingerbread ROM
    6. Or you can just restore your Gingerbread NANDROID backup, if you have one, AFTER downgrading the firmware and flashing the radio.
    7. Go to Radio/RIL thread and follow the instructions to check if you have the matching RIL (HTC-RIL 2.2.0169HMQ) for the 10.56.9035.00U_10.14.9035.01 radio contained in the 1.17 firmware package. (thanks to mf2112)

    Useful links
    1. [HELP THREAD] Ask any question. Noob friendly
    2. Android Revolution HD thread. (thanks to mike1986.)
    3. Firmware Package. (thanks to mike1986.)
    4. User-friendly firmware. (Thanks to Kohr-Ah)
    5. [KERNEL]Overclocked kernel 3.0.16-v1.30.4 | CPU Voltage Table. (thanks to SebastianFM)
    6. [Kernel]Sense GB/ICS(v029/v001)OC~1.73GHz/UV/SLQB/ZRAM/Power Saving[Mar-21]. (thanks to faux123)
    7. Sensation RIL and RADIO. (Thanks to mf2112)
    8. ICS Problem Fixes / Mods. (thanks to Hawke84)
    9. Mods, Add-Ons and additional Links for ARHD on Sensation (thanks to Kohr-Ah)



    A very special thanks to all members who have contacted me with positive messages, kind words and those who asked for a way to buy me a beer. Many thanks for your appreciation and support guys.

    Donation list:
    • BrianMCollins
    • owlen
    • jonomac
    ​
    View
    9
    joaquinf
    joaquinf
    Update Log

    Code: 
    [FONT="Verdana"][B][JUL.15.12][/B]
[LIST]
[*]First post updated to flash the latest 3.33 firmware version
[*]Second post updated to flash the latest ARHD 6.7.x /1.2.x version 
[*]4EXT Recovery touch Flashing tool updated to v1.0.0.5 RC5 
[*]PM58IMG.zip file to flash recovery via bootloader updated to v1.0.0.5 RC5 
[*]Help thread link added to the useful links section
[*]Minor cosmetic changes and fixes
[/LIST][B][MAY.03.12][/B]
[LIST]
[*]4EXT Recovery touch Flashing tool updated to v1.0.0.5 RC3 
[*]PM58IMG.zip file to flash recovery via bootloader updated to v1.0.0.5 RC3 
[*]Added link to [GUIDE] Flashing roms with S-ON (thanks to Asskicker2)
[*]Minor cosmetic changes and fixes
[/LIST][B][MAY.01.12][/B]
[LIST]
[*]All download links updated to Dev-Host 
[*]Added more information for S-ON devices and installation instructions according to Hboot version
[*]Added third method to flash 4EXT recovery touch via bootloader (PM58IMG.zip file)
[*]Added link to a guide on how to flash gingerbread RUU
[*]Added ril information and link in the Gingerbread section
[*]Minor cosmetic changes and fixes
[/LIST][B][APR.16.12][/B]
[LIST]
[*]Completely redesigned layout split in two different posts. Post#1: How to flash the ICS 3.32 firmware, Post#2: How to flash/update Android Revolution HD v.6.6.2 - Ice Cream Sandwich ROM
[*]New design, easier to follow
[*]Added instructions to update ARHD coming from a previous version.
[*]Thread name changed to [B][GUIDE][APR.16.12] How to flash ICS 3.32 firmware | flash/update ARHD 6.6.x ICS ROM[/B]
[*]Still more to come :D
[/LIST][B][APR.03.12][/B]
[LIST]
[*]OP updated to the latest ARHD 3.32.401.5_R and 3.32.401.105_R base
[*]Added Sensation RIL and RADIO thread link.(Thanks to mf2112)
[*]Gingerbread section updated to the complete 1.17 firmware package (Thanks to Kohr-Ah)
[*]Minor cosmetic changes
[/LIST][B][MAR.27.12][/B]
[LIST]
[*]Info updated to latest ARHD 6.5.4 (thanks to Grem135 for the installation screenshots)
[*]Added faux123 kernel thread link
[*]Added shnizlon theme thread link
[*]Minor cosmetic changes
[/LIST][B][MAR.26.12][/B]
[LIST]
[*]Info updated to the latest 4EXT Recovery touch v1.0.0.4 RC3 
[*]4EXT Recovery touch v1.0.0.4 RC3 flashing tool updated
[/LIST][B][MAR.24.12][/B]
[LIST]
[*]Info updated to the latest ARHD 6.5.3 release
[*]Minor cosmetic changes
[/LIST][B][MAR.12.12][/B]
[LIST]
[*]Info updated to the latest 4EXT Recovery touch v1.0.0.4 RC2 
[*]4EXT Recovery touch v1.0.0.4 RC2 flashing tool updated
[*]Added info regarding doing S-off to hboot version non supported by revolutionary tool 
[*]Added link to [Guide] Successful S-OFF after (wrong S-ON) brick for ICS/GB ,Downgrade S-ON firmware. Thanks to trkaaa
[*]Minor cosmetic changes
[/LIST]
[B][MAR.07.12][/B]
[LIST]
[*]Info updated to the latest 4EXT Recovery touch v1.0.0.4 RC1 
[*]4EXT Recovery touch v1.0.0.4 RC1 flashing tool updated
[*]Minor cosmetic changes
[/LIST]
[B][MAR.04.12][/B]
[LIST]
[*]Info updated to latest ARHD 6.5.0 (HTC update 3.32.401.5)
[*]Minor cosmetic changes
[/LIST]
[B][MAR.01.12][/B]
[LIST]
[*]Updated to Firmware from 3.32.401.3 & 3.32.401.103 RUU and ARHD 6.4.0 Based on FINAL HTC 3.32.401.3 update
[*]Minor cosmetic changes
[/LIST]
[B][FEB.28.12][/B]
[LIST]
[*]Added MD5 Checker tool
[*]Thread name changed from: [GUIDE] How to flash ARHD 6.3.x series | ICS firmware update. to: [GUIDE] How to flash ICS 3.30 firmware and ARHD 6.3.x ICS ROM
[*]Minor cosmetic changes
[/LIST]
[B][FEB.22.12][/B]
[LIST]
[*]Updated to Firmware from 3.30.401.1 & 3.30.401.101 RUU and ARHD 6.3.0 Based on newest Release Candidate RUU for HTC Sensation (3.30.401.1) / HTC Sensation XE (3.30.401.101)
[*]Minor cosmetic changes
[/LIST]
[B][FEB.14.12][/B]
[LIST]
[*]Added user-friendly 4EXT Recovery touch flashing tool (By me :D)
[/LIST]
[B][FEB.03.12][/B]
[LIST]
[*]([I]After flashing[/I]). Added link to flashable rosie fix (Tanks to Hawke84)
[/LIST]
[B][FEB.02.12][/B]
[LIST]
[*]([I]Do you want to go back to Gingerbread?[/I]). Added 1.17 User-Friendly Firmware information
[*]Added new section with useful links (WIP)
[*]Minor cosmetic changes
[/LIST]
[B][FEB.01.12][/B]
[LIST]
[*]Added missing thanks 
[*]([I]Upgrading the firmware[/I]). Added description 
[*]([I]Removing the PG58IMG.zip file from the sd card[/I]). Added new section with more detailed information and additional steps
[*]([I]Flashing the ROM[/I]). Added aditional information about the installation of the ROM and the questions asked while flashing 
[*]([I]Before Flashing[/I]). Added the option to backup SMS and some users suggested apps with market links(Tanks to HPDoubleDutch and Hawke84)
[*]([I]After flashing[/I]). Added the option to restore SMS and some users suggested apps with markete links (Tanks to HPDoubleDutch and Hawke84)
[*]([I]Before Flashing[/I]). Added Titanium Backup market link
[*]([I]Before Flashing[/I]). Added info. about allowing the installation of non-Market apps
[*]Minor cosmetic changes
[/LIST]
[B][JAN.30.12][/B]
[LIST]
[*]Initial post
[*]([I]Before Flashing[/I]). Added info. about how to make a NANDROID backup in 4EXT recovery touch
[*]([I]Flashing the ROM[/I]). Unlocked bootloader information updated, item 3.
[*]Minor cosmetic changes
[/LIST]
[/FONT]
    View
    3
    ganeshp
    ganeshp
    girishiyengar said:
    hey thanks for the fanstastic guide...i have a completely stock sensation 1.18,, runinng 2.3.4,, revolutionary fails to get root..after a few searches i noticed that i have to use the taco root method..so will i have to use taco roo???t or am i doing some step in a wrong way..
    Click to expand...
    Click to collapse

    tacoroot is the solution
    and here is the guide
    SOFF WITH TACOROOT FOR HBOOT 1.18

    EDIT: jaoquinf
    why dont you add this guide to your OP..its 100% confirmed that for 1.18 HBOOT revolutionary is failing to get root (zerg root failed error)
    so just add a clause saying "in case of HBOOT 1.18 and revolutionary failed while acquiring root ..use this guide .or something"

    just a suggestion though :D
    View
    3
    ganeshp
    ganeshp
    girishiyengar said:
    oh damn.. :( so i will have to download a non xe ROM right??? nd can i flash a sense 4 ROM using the same steps in ur guide???
    Click to expand...
    Click to collapse

    use beats mudhi's mod..it will give you equalizer
    just flash this mod via recovery...thats all

    BEATS MOD BY MUDHI

    sorry joaquinf for invading your thread :D
    View

New posts