[DEV] ICS port for I9000/I9000B - BETA (ICS sources) - work in progress

Status
Not open for further replies.
Search This thread

richiebm

Senior Member
Sep 22, 2010
102
25
Is safe, only do a nandroid of your actual rom/mod.
You must have your actual stock rom (odin one) with your pit, for unistall this rom.

Ps: really sorry for my basic english

Thank you for your reply. I have two questions, if it doesn't bother you :)

1) After flashing ICS onto my SGS, will the CWM recovery still be there? Because, if anything fails, I should be able to flash to CM7, which I have in my sd card for emergency purposes. Will the 3 button combo to recovery still work?

2) Or is flashing stock using Odin the only way to get my phone working if anything goes wrong?

Thanks a bunch ....
 
  • Like
Reactions: D1GG3R

drakenabarion

Senior Member
Dec 13, 2010
1,164
199
Kildare
OnePlus Nord 2T
Nothing Phone 2
Kernel for i9000 does not have the ril inside, ril is on the last image i've uploaded, you need to download and install the lastest image (first post) and then the i9000 kernel.

Its true that the negative color its a androidGLES problem, but the only working (so far) software GLES is the one that cames with the emulator, so enabling the hardware video chip will fix the color (since it is going to be rendered on real hardware and not in the softGLES)

Cheers

Thanks. Sorry for the confusion. :)

Sent via my GT-I9000 running CM7 (GB 2.3.7) using XDA premium
 

onecosmic

Senior Member
Nov 17, 2010
84
1,685
Buenos Aires
Thank you for your reply. I have two questions, if it doesn't bother you :)

1) After flashing ICS onto my SGS, will the CWM recovery still be there? Because, if anything fails, I should be able to flash to CM7, which I have in my sd card for emergency purposes. Will the 3 button combo to recovery still work?

2) Or is flashing stock using Odin the only way to get my phone working if anything goes wrong?

Thanks a bunch ....

This rom uses a Cyanogen kernel, so you have all CWM recovery features available.

Cheers
 

felix_tung

Member
Oct 24, 2009
40
4
Just tried twice now installing rom first and kernel after. Touchscreen doesn't seem to be working and neither does RIL. Using i9000 international.
 
  • Like
Reactions: Paulroberts

perosredo

Senior Member
Jan 25, 2011
483
86
You need to start using version numbers with each build or this is going to get ugly.

That being said, thanks; most appreciated.
 
Last edited:
  • Like
Reactions: beekay201

RockRatt

Senior Member
Aug 1, 2010
4,101
3,711
Very good job on this, I have been following the first thread you were posting on. I do have a question for you all, when flashing does it flash bootloaders? Or does it use the same gingerbread bootloaders? I know this is not for the captivate i897 but in the past we were kind of able to flash i9000 roms but had reverse logic on the headphone Jack and lost some of our buttons. So this is why I am wondering about bootloaders in case someone from the captivate can port over what you have so far even if it means loss of buttons so we can test things out. Thanks for your hard work.

Sent from My KickAss CM7 Captivate
 

drakenabarion

Senior Member
Dec 13, 2010
1,164
199
Kildare
OnePlus Nord 2T
Nothing Phone 2
Very good job on this, I have been following the first thread you were posting on. I do have a question for you all, when flashing does it flash bootloaders? Or does it use the same gingerbread bootloaders? I know this is not for the captivate i897 but in the past we were kind of able to flash i9000 roms but had reverse logic on the headphone Jack and lost some of our buttons. So this is why I am wondering about bootloaders in case someone from the captivate can port over what you have so far even if it means loss of buttons so we can test things out. Thanks for your hard work.

Sent from My KickAss CM7 Captivate

I use the gb bootloader and it was not changed during flash (can only be changed using Odin and I didn't use Odin).

Oh but you reminded me if something. Many many months ago, cm7 couldn't access external sdcard while on gingerbread bootloaders. Maybe something related to that could fix the external sdcard access. Do people running Froyo have sdcard access in these builds? (Then again, chances are that if someone would test this build, then they have already the most uptodate bootloader :) )

(Sorry if I am way off here. I hope these ideas can help out even if I am not directly able to code well).

Edit: another go at testing with everything linked from this thread. RIL is working fine. Can make calls etc. Touchscreen doesn't work well so maybe I am doing something wrong (or misread. I was sure I read that you fixed touchscreen swiping on I9000.)

Sent via my GT-I9000 running CM7 (GB 2.3.7) using XDA premium
 
Last edited:

abhimahi

Senior Member
Nov 1, 2011
82
12
Sydney, Australia
sonic > super sonic > ultra sonic > ONECOSMIC

I love you man...u are great

---------- Post added at 05:33 AM ---------- Previous post was at 05:26 AM ----------

One quick question...
can i flash this on my sgs running on rooted xxjvr?
 

Ryyuu

Senior Member
Jul 5, 2010
269
129
Brisbane
I have been playing around with it for the past few minutes.
I'm glad we have a somewhat working port of ICS.

I am able to help with testing if needed. I cannot code though.

I have found that trying to unlock the screen using swype gestures does not work -- However, if you press the menu and back buttons the screen will unlock.
I haven't been able to get any swipe gestures working on the phone at all. Tapping works, I can access the app menu, and can open apps but I cannot pull down the notification bar nor can I swipe to change screens.

I can confirm that RIL IS working! I have full 3g signal and am able to browse the web.

I am about to do a wipe and try again t see if I can get the lock-screen working..
I will update soon.
 
Last edited:

Ryyuu

Senior Member
Jul 5, 2010
269
129
Brisbane
Are you using the files from the first post of this thread?
Certainly am.

Okay, so flashing is successful every time.

The phone does not respond to long presses on the screen or swiping genstures, only tapps. This is why the lock-screen isn't working nor are any of the swipe movements.

Will continue to play with this to see if there is something I can do.

onecosmic - Do you have the touchscreen working on your device? IE. are you able to unlock the phone successfully?
 
Last edited:

drakenabarion

Senior Member
Dec 13, 2010
1,164
199
Kildare
OnePlus Nord 2T
Nothing Phone 2
Do you have the touchscreen working correctly?
Do apps keep crashing for you?

Its not fully stable yet but its going well by the look of it. Some random restarts, but touchscreen working well. Laggy system for now but things are set to improve.

Great job (and yes I typed this in ics)

Sent via my GT-I9000 running CM7 (GB 2.3.7) using XDA premium
 
  • Like
Reactions: namuk and xella
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 715
    Links and rom updated:

    ICS Sources build Image (Not SDK anymore, version 4.0.1_r1)

    BIG, HUGE, MASSIVE, THANKS TO PAWITP FROM CM TEAM!!! (specially camera.aries.so, great job!)

    FUGU kernel, linux 3.0, integrated voodoo sound and color :) (big thanks to renaudallard)

    Here is the most recent image BETA 2:

    Changelog on the second post.


    We moved to google code:

    http://code.google.com/p/ice-cream-sandwich-sgs/downloads/list

    (ATENTION: image comes with a kernel for i9000b, if you have a i9000 international or vibrant, download the correct kernel)

    Thanks to ytt3r for the vibrant kernel :)

    Agreat tutorial made by ybinnenweg for installation and common issues (Thanks!):

    http://xdaforums.com/showthread.php?p=19563068#post19563068

    How to root the rom:

    http://xdaforums.com/showpost.php?p=19175375&postcount=628


    Github's:

    http://github.com/onecosmic

    http://github.com/syndtr

    http://github.com/koaaN

    http://github.com/pawitp

    http://github.com/teamhacksung

    http://github.com/cyanogenmod


    IRC channel:

    http://webchat.freenode.net/
    ##icssgs <- yes, double ## (we switched channel)

    What works:
    Both cellphones:
    Hardware Acceleration
    Audio
    calls, sms, 3g - no more script needed.
    Touch
    Wifi
    SDCards (internal and external)
    Market
    Contacts sync
    Calendar sync
    camera
    panorama mode
    face unlock
    Gps
    data usage
    Partition schemma is now including datadata back to avoid issues with slow movinand devices
    usb support
    bluetooth

    What does not work:
    Camera (video recording)
    Phone encryption


    I'll be posting updates as soon as i have them.

    CREDITS:

    Pawitp: ril fixes, hw acc , camera lib hack(big android guy :) ).
    teamhacksung
    Cyanogenmod team
    Syntr: kernel patches
    Galnet : First Release
    kooaN: i9000 kernel update
    Thearc77 : google apps
    WarDrake: mirroring
    ytt3r: kernel patching, vibrant and captivate kernels
    SGS CM team: ICS patches
    Motafoca 3g switch apk


    And all the other people that is helping to make this a reality :)


    Cheers
    142
    Changelog:

    Beta 2:

    Adb now works at boot (previously it only worked after the phone full boot was complete)
    PIN lock fixed (it should work, i cannot test it since i dont have pinlocked sim)
    adb reboot recovery now reboot the phone to the recovery instead of performing a normal reboot
    Recovery now allows you to make nandroid backups
    Fixed Market download problem
    Minor fixes (code cleanup)
    133
    Tutorial How to flash Alpha 7! NOOBPROOF

    OK, for all you people who are too lazy to read the damn thread or simply don't understand it(no offense) I will write this very noob-proof guide to install alpha 6. This guide is for the I9000 SGS; I’d love to write it for the I9000B, but as I don’t have this device I can’t ensure you everything will work.
    Warning, alpha builds are not fully working!! They may contain bugs & have random reboots, by using this guide you accept this. Also I’m not responsible for hard-bricking your phone, which acually shouldn’t happen if you just follow this guide very exactly.

    So we start off, ofcourse we need some files & requirements:
    - A phone with a custom kernel installed!! This is very important as we need to enter CWM(ClockWorkMod(recovery))!
    - The rom itself ( http://ice-cream-sandwich-sgs.googlecode.com/files/ICS_4.0.1_r1-alpha7.zip )
    - The kernel (http://ice-cream-sandwich-sgs.googlecode.com/files/CM7FuguMod_20111124_update-i9000.zip )
    - SuperUser fix (http://ice-cream-sandwich-sgs.googlecode.com/files/Superuser-3.0.6-efgh-signed.zip )
    - 3G fix ( http://xdaforums.com/attachment.php?attachmentid=793818&d=1322157965 )
    - The ability to read english & set your brain to read & do mode.

    OK, now you’ve downloaded all those files and set your brain to read & do let’s start off.
    First of all we need to disable your simlock, as ICS will not enable your network with a simlock. If you don’t feel like disabling your simlock, there is no point for you flashing ICS.
    To do this we’ll do the following:
    1. Go to settings
    2. Go to the security tab
    3. Click on sim card lock, and disable it.

    After you’ve done this you have to make sure your on a JVT rom. Also disable the lagfix.(I’m not going to explain this. Why? Well if you have flashed any custom rom you know how to do this.)

    Now hook up your phone to your PC in USB mode, and in the root of your internal storage make a folder called “Flashable zips”. Now copy ALL those zip files you’ve just downloaded to this folder, ALL of them.

    After your done we will reboot in recovery, for the beginners a small tutorial.
    1. Turn off your phone by holding down the power button and clicking “power off phone”.
    2. Wait for your phone to TOTALLY turn off, when it is it’ll vibrate for a moment.
    3. Now hold the “Volume UP” + “Home” + “Power” buttons until you see the Galaxy S I9000 logo appear, when the logo appears release the buttons and wait a bit. Now you will be in recovery!

    Now we are going to backup your phone, incase you want to return to your old setup. (I will not provide a guide how to return, but as long as you have the backup almost any dev can help you with putting it all back together) Now here follow these exact instructions to backup your current setup.
    1. Use the volume buttons to navigate to “backup and restore”
    2. Press either the power button or home button to select the option. (the text may disappear depending on your kernel, just re-press the button you pressed to make it disappear and the text will be there again)
    3. Now press “Backup” and it will start backing up your phone, this may take a while.. get a coffee.
    Check if the backup was succesfull, the recovery will report this in white/orange tekst.

    You’ve succesfully made a nandroid!

    Now we need to wipe our phone.
    1. In the recovery menu select “wipe data/factory reset”
    2. Now select “wipe cache partition”
    3. Go ahead and go to the “advanced” option
    4. In there select “wipe Dalvik Cache”
    5. Go back to the menu you were before.

    OK, now it’s time to start the actual flashing, again follow these instructions to the letter!
    1. In the recovery menu navigate to “install zip from sdcard” and press your selection key
    2. Now choose the option “choose zip from sdcard”
    3. Navigate to the folder we just made “Flashable zips”
    4. In there select “ICS_4.0.1_r1-alpha7.zip”
    5. Now navigate to the option “Yes – install ICS_4.0.1_r1-alpha7.zip”
    It will now flash the rom.
    Does your phone reboot into a blue recovery menu? Just follow the steps again as discribed above ^.

    Once we have done this, we will have to flash the kernel.
    1. In the recovery menu navigate to “install zip from sdcard” and press your selection key
    2. Now choose the option “choose zip from sdcard”
    3. Navigate to the folder we just made “Flashable zips”
    4. In there select “CM7FuguMod_20111124_update-i9000.zip”
    5. Now navigate to the option “Yes – install CM7FuguMod_20111124_update-i9000.zip”

    Once it’s done, go ahead and hit the “reboot system now” option.
    Now wait for the phone to boot. Take a coffee in the meantime, this can take a while.

    Now an important thing!!
    Android will comeup with 2 options, first check the box "set as default" then press the FIRST ONE!

    When it’s up and running, we need to install script manager. Open up the market and setup your gmail account. Once you’ve done this search in the market for “script manager”, and download & install Script Manager FREE.

    We need to flash a 3G fix by WarDrake. It seems the bootanimation is too big and it causes 3G to not work for most of us. Thus the bootanimation needs to be removed. Follow these instructions to flash this package.
    1. In the recovery menu navigate to “install zip from sdcard” and press your selection key
    2. Now choose the option “choose zip from sdcard”
    3. Navigate to the folder we just made “Flashable zips”
    4. In there select “enable3gv3.zip”
    5. Now navigate to the option “Yes – enable3gv3.zip”
    Thanks WarDrake for finding this out!!

    Once you've flashed the 3G fix go ahead and flash the superuser fix.
    1. In the recovery menu navigate to “install zip from sdcard” and press your selection key
    2. Now choose the option “choose zip from sdcard”
    3. Navigate to the folder we just made “Flashable zips”
    4. In there select “Superuser-3.0.6-efgh-signed.zip”
    5. Now navigate to the option “Yes – Superuser-3.0.6-efgh-signed.zip”
    When it’s done flashing hit the “reboot system now” option.

    Now the 3G script is already included, and you might have noticed a 3G icon above the signal bars, though data still doesn't work. For this part of the tutorial I’d like to thank WarDrake who simplyfied this fix. I’m using his instructions and all credits go to him!!
    1. Open script manager and go navigate to : /etc/init.d
    2. In here select the script named 99enable3g and open it as a script
    3. Now click on the button "help" and select: run as root, run at boot, run on network change. (DO NOT RUN IT)
    4. Hit the “save” button.
    5. Exit script manager

    Once you’re done reboot your device and suddenly….

    AAMMMMGGG 3GG NETWORKKZZZ <3

    Thanks again to WarDrake for this amazing fix!

    If you followed my instructions correctly, you should be running Alpha 7! If it doesn't work you are probably one of The Almighty R’tards and you will have to start all over again, good luck.

    Now you’ve all noticed I used the same tutorial everytime, that’s because It’s easier for people to understand, and they will learn how to flash files by doing the same procedure over and over.

    Disclaimer,
    If you somehow managed to f*ck this up, go to hell and go f*ck yourself.
    Mods feel free to remove my disclaimer.

    Written by YBinnenweg(on forums & IRC)

    Please look through the F.A.Q before joining IRC and asking the same question over and over.
    F.A.Q
    Q: AAAMGG MIEE PHONE NO BOOOOOTTT?@!?!?!
    A: If you would have read the tutorial you would know that if your phone reboots into a blue recovery menu, you should FLASH THE ROM AGAIN.

    Q: My touchscreen doesn't work!
    A: Try reflashing the i9000 kernel, though if you are using a i9000b don't flash it.
    62
    Oke, seems some ppl can't play nice. Thread locked till OP send me a PM or he is ready for update.

    Past few days i had to clean the mess up. This has to stop.
    31
    Heads up:


    Well, system pushed to 350mb (old system + datadata size), i'll try to put together wifi and removed stuff on a single image.


    Cheers