[ROM] CANADIAN - LG Eclypse - C800G
KDZ Stock ROM/Recovery Image
| Bell Mobility / Virgin Mobile CANADA / Solo Mobile / PC MOBILE / Bell Alliant / Sasktel / MTS |
**INSTRUCTIONS ON HOW TO LOAD KDZ TO PHONE IS POSTED BELOW**
You can use the files posted below if you brick your phone and want to unbrick it.
(( :good: Credit and Thanks to "RennyC" for Pointing this out :good)
I have also posted below the T-MOBILE - MyTouch Q C800 Android - v2.3.6 V10v file as the file also works with the Canadian LG Eclypse - C800G.
BELL MOBILITY (CANADA)
Model: LGC800G
Suffix: ABLMDG
Buyer: BLM/BELL MOBILITY (CANADA)
Download Stock Rom (Android v2.3.4 - LGC800G-V10c-DEC-01-2011): V10C_00.kdz
Download Updated Rom (Android v2.3.6 - LGC800G-V10k-AUG-24-2012) V10K_00.kdz
BELL WIRELESS ALLIANCE (CANADA) - (Bell Alliant, Sasktel & MTS)
Model: LGC800G
Suffix: ABWADG
Buyer: BWA/BELL WIRELESS ALLIANCE (CANADA)
Download Stock Rom (Android v2.3.4 - LGC800G-V10c-DEC-01-2011): V10C_00.kdz
Download Updated Rom (Android v2.3.6 - LGC800G-V10k-AUG-24-2012): V10K_00.kdz
PC MOBILE (CANADA)
Model: LGC800G
Suffix: APCCDG
Buyer: PCC/PC MOBILE (CANADA)
Download Stock Rom (Android v2.3.4 - LGC800G-V10c-DEC-01-2011): V10C_00.kdz
Download Updated Rom (Android v2.3.6 - LGC800G-V10k-AUG-24-2012): V10K_00.kdz
SOLO (CANADA)
Model: LGC800G
Suffix: ASOLDG
Buyer: SOL/BELL MOBILITY SOLO (CANADA)
Download Stock Rom (Android v2.3.4 - LGC800G-V10c-DEC-01-2011): V10C_00.kdz
Download Updated Rom (Android v2.3.6 - LGC800G-V10k-AUG-24-2012): V10K_00.kdz
VIRGIN MOBILE (CANADA)
Model: LGC800G
Suffix: AVMBDG
Buyer: VMB/VIRGIN MOBILE (CANADA)
Download Stock Rom (Android v2.3.4 - LGC800G-V10c-DEC-01-2011): V10C_00.kdz
Download Updated Rom (Android v2.3.6 - LGC800G-V10k-AUG-24-2012): V10K_00.kdz
T-MOBILE - MyTouch Q C800 Android - v2.3.6 V10v
Model: LGC800
Suffix: ATMODG
Download Stock Rom (LG SITE): V10V_00.kdz
Download Stock Rom (DropBox): V10V_00.kdz
INSTRUCTIONS ON HOW TO LOAD KDZ TO PHONE
all you need to download the following files.
1.) KDZ updater:
- http://xdaforums.com/atta...5&d=1287222698
2.) Your Mobile Carrier KDZ File Posted above
Originally Posted by victortangocharlie and edited by nikhil4186
Procedure to install original firmware using KDZ-FW-UPD.exe ( KDZ FIRMWARE UPDATER )
1. Install LG PC Suite IV from SD card which came with phone by connecting the phone to PC through USB cable. This is done to install the drivers for the phone on the PC (the procedure is as follows)
- Enable the 'USB Mass Storage Only' mode in the phone's Settings/SDcard & Phone Storage menu.
- Connect phone to PC with the USB Cable.
- Press the 'Turn on USB Storage' button which appears on phone.
- Browse to the folder containing the 'LG PC Suite IV' on the phone's SD card using Windows Explorer and run the LG Installer file. PC Suite will now install on your system along with the required drivers for your phone.
- Cancel setting up PC Suite or continue setting up PC Suite if you want to Sync or backup the phone data.
- After closing PC Suite, Safely remove the USB device from your system.
- Press the 'Turn off USB Storage' button on phone screen.
- Detach the USB Cable.
- Disable the 'USB Mass Storage Only' mode in the phone's Settings/SDcard &Phone Storage menu.
Quote:
OPTIONAL STEP
Switch off the screensaver and other power saving features on the PC and also set the screen timeout delay on the phone to 30 minutes.(Settings/Display/Screen Timeout)
2. Remove the screen lock
3. Charge the phone to the maximum.
4. Enable USB Debugging on Phone (Settings/Applications/Development).
5. Detach all other peripherals from your PC. Exit all running applications on your PC especially other PC suites if any. Also exit running programs from the notification bar on the desktop. (Also uninstall Nokia or other phone drivers & microsoft visual ++ runtime environments - not an essential step.)
6.[IMPORTANT] Disable 'LGE Virtual Modem' in PC's Device Manager. (In your Windows operating system, go to Control Panel > System > Hardware > Device Manager > Modems > Right click on LGE Virtual Modem and click Disable.)
If this step is not followed the Phone will get bricked!
7. Move all the apps from the SD Card to phone memory and then Unmount the SD card from the phone (Settings/SDcard & Phone Storage) so as to remove it (physically) from the phone.
8. Open the phones back cover and remove the SD Card.
9. Download KDZ_FW_UPD_EN.7z onto your PC and extract it to a folder. Available HERE.Direct Download Link. (MD5 of 7zip file - 813A28BE9182AB604A1D43E745CE7AD7)
10. Run the msxml.msi file and complete the installation.
11. Connect the phone to PC with USB Cable.( If you are using a desktop PC, make sure you use USB ports that are in the back of your PC, avoid the front ports.)
12. Run KDZ_FW_UPD.exe from the extracted folder.
13. Chose TYPE as 3GQCT & Phone Mode as DIAG.
14. In the 'KDZ file' space, browse for the firmware you want to install.
15. Press the 'Launch software update' button.
16. The firmware flashing process is now underway.
If all goes well, in 5-10 minutes the phone will be flashed with the new firmware.
The phone takes about 2 or more whole minutes in that state before booting up fully and entering the home screen. Wait till phone reboots by itself ( which it might not) so wait for a while before manually switching it on.
17. After booting up fully, detach the phone from the pc.
Last edited: