"LOOK" Here First {List} Roms/Kernels/Mods/Themes/FAQ'S *Update 27/09/11*

Search This thread

neuropass

Senior Member
Nov 22, 2010
173
37
www.tweakscene.com
So, if you have not yet flashed, satisfy my curiosity and post the firmware that is the default and then do a nandroid backup before you start .

this is the info for a 4G tab from rogers, just updated to android 3.2:


model number: GT-P7500R

android version: 3.2

baseband version: P7500RUXKK2

kernel version: 2.6.36.3 se.infra@SEP-63 #1

build number: HTJ85B.UXKK2 P7500RUXKK2
 

jlokos

Senior Member
May 27, 2011
2,714
820
Willamette Valley
Google Pixel 8 Pro
Recovery mode navigation

I 'm sure there is a simple answer; however, I looked everywhere and can't find it. I somehow disabled the back key in recovery mode, and I can't get back to the menu to allow to me to reboot my tab. I've tried every combo of power and up and down volume rockers. I'm currently stuck in choose zip to apply...Help!

EDIT: As I said, I knew it was simple. Just hold the power button down for a few seconds and it will re-enter recovery mode.
 
Last edited:

DarthV

Senior Member
Aug 9, 2010
148
6
Canadian Maritimes
My sister just bought a 10.1 tab from Rogers and I haven't really kept up, so I'd like to confirm on what the best way to root it would be. I've already rooted my 16gb wifi, can I just use the same method (flashing cwm with odin then flashing the root update zip from cwm) ?

Don't think she's planning on using the 4g (lol) modem, only wifi.

GT-7500R
Android 3.1
 

GazaIan

Senior Member
Dec 27, 2010
1,570
405
Your basement
twitter.com
I 'm sure there is a simple answer; however, I looked everywhere and can't find it. I somehow disabled the back key in recovery mode, and I can't get back to the menu to allow to me to reboot my tab. I've tried every combo of power and up and down volume rockers. I'm currently stuck in choose zip to apply...Help!

EDIT: As I said, I knew it was simple. Just hold the power button down for a few seconds and it will re-enter recovery mode.
For future reference, run down the menu three times to enable or disable the back option.
 

Bisis

Senior Member
Mar 14, 2009
273
0
CWM Recovery - differences through ROM Manager and ODIN

I have P7500 3G model.
I used steps of the first post and succesfully rooted the device and installed CWM from ROM Manager.

What is the difference between flashing CWM recovery through ROM Manager and through ODIN?
 

dh4645

Senior Member
Aug 19, 2010
653
51
PA
how do i get rid of the crapware on the device after rooting?
what is the most common crapware everyone uninstalls.

also what is the best/most used ROM for P7510 and why is it the best
 

TommyPickles

Senior Member
Jan 9, 2008
96
3
I've searched high and low but can't find a simple answer: When I boot my Galaxy Tab 10.1 I/O Edition up I have a choice currently between Fastboot mode (USB icon) or ODIN mode (Downloading)

There's no option for recovery. I've flashed (fastboot flash recovery recovery.img) and it seems to have worked, but still no dice. The only way I can get into recovery atmo is manually booting in (fastboot boot recovery.img)

Can someone advise?! And also can you update the first post to reflect advice for people like me, because of the 3.2 bug many people have borked their tablet and might have same limited options..
 

zuperpailon

Senior Member
Oct 2, 2011
174
13
Santiago
I have a 3g Tab ...

Accidently I used the files under GOOGLE I/O & RETAIL WIFI VERSION [GTP7510] instead of the ones under RETAIL 3G [GTP7500]



It rooted fine, but I have a doubt:

Can this give me any problems in the furure?
 

chiefmcbeef

Member
Apr 1, 2010
30
0
Im looking to load a stock ROM onto my tab and then restore the standard recovery as I have the Newton Rings issue and need warranty service.

The info in the first post states to install the original rom/kernel zip from CWM recovery.

I've downloaded a stock ROM from samfirmware but this is a tar and tars don't show up in CWM. So, I've put the tar into a zip, and tried putting the contents of the tar into a zip as well as the contents of the tar and rar (boot.img, bootloader.bin etc etc) into a zip and CWM fails to install the ROM.

Is there a step that I need to carry out to create a zip of a stock ROM from samfirmware?

Otherwise, is Odin ok to use to load a stock rom and recovery back on to make the tab look unmodified?

Thanks!
 
Im looking to load a stock ROM onto my tab and then restore the standard recovery as I have the Newton Rings issue and need warranty service.

The info in the first post states to install the original rom/kernel zip from CWM recovery.

I've downloaded a stock ROM from samfirmware but this is a tar and tars don't show up in CWM. So, I've put the tar into a zip, and tried putting the contents of the tar into a zip as well as the contents of the tar and rar (boot.img, bootloader.bin etc etc) into a zip and CWM fails to install the ROM.

Is there a step that I need to carry out to create a zip of a stock ROM from samfirmware?

Otherwise, is Odin ok to use to load a stock rom and recovery back on to make the tab look unmodified?

Thanks!

Tar files are to be used with Odin. Not cwm.

Follow the instruction in http://www.teamovercome.net/p7500/?page_id=5. Under 'Re-“Stocking” Yer System…' section
 

TheHighlightGuy

Senior Member
Jul 23, 2011
526
131
Austin
Can't get to Download Mode

Hey all, no matter how long I hold the Power + Vol Down button it just keeps looping to Samsung Galaxy Tab 10.1 screen, it never gets to the Download Mode. Can anyone help out here?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 109
    This thread is here to make the lives of every one just that much easier. Will try to keep the first and reserved posts as up to date as humanly possible.

    Please ask all questions in relation to issues you are having following the FAQ instructions to make it easier to answer your questions and easier for us to track the solutions that way the FAQ post is as up to date and accurate as possible.

    As the GT10.1 landscape changes this thread will get updated. I will try and keep everything as simple and to the point as possible. Contributors will be much appreciated.

    THE BASICS

    BOOTLOADER MODE

    Turn device off. Then hold down power + volume down button (the button closer to power button) until you see two icons appear then let go. Left icon (box) is recovery and right icon (Android robot) is Download. Use Vol. down to navigate then vol. up to select.

    DOWNLOADING MODE

    Just tap volume up when you have highlighted the android robot icon. You should see downloading appear under the icon.

    RECOVERY MODE

    Vol. up/down to navigate up or down and power button to select.

    This is what you use to install ROMs/KERNELs and even themes for your specific roms when they become available. Just highlight the box icon and hit Vol. up. What we are doing now is replacing the stock recovery on your device with Clockwork Mod Recovery which allows you install unsigned ROMs/Kernels/Updates. When in recovery mode you can also back up whatever current ROM you have on your device so if you install a new ROM and something goes wrong you could always use recovery to restore. Whenever you install a new ROM it's advised to always wipe the device using cwmR to ensure a more stable install. Install new ROMS will also mean you will be losing all the apps on your device. It will look like you have a brand new device after the install unless its an update.zip for whatever rom you are currently on and the developer of that rom supports it.

    Don't worry about losing your apps as you can always re-download them once you sync your device with your google account. However, the state of those apps and your settings will be lost, so I strongly suggest that you use an app like titanium back up and always make a back up of your apps before flashing any new ROMs. Check in the Recommended Apps section for a direct link to Titanium backup.

    Here is the clockwork mod menu

    - Reboot system now (self explanatory :) )
    - Apply update from SDcard. (when you connect your device to your computer it will show up as tablet. The SDcard that cwm refers to is simply your device storage. Always make sure to copy install.zips to the root directory of your tablet storage.) You use this when applying an update for a specific ROM if that is what the ROM developer says.
    - Wipe Data/ Factory Reset You should always do this before you install a new ROM or if you are having minor issues with your device.
    - Wipe cache partition Think of this as the lite version of whats above :). If you do above though it doesn't hurt to do this too.
    - Install zip from SDcard Use this to install new ROMs.
    - Back up and Restore
    - Mounts and Storage use this to connect your device to your computer when in recovery mode. It is also possible to transfer files to your device while in this mode.
    - Advanced What you are interested in here is something called dalvik cache, you want to wipe this too before installing any new ROM
    - Power off

    CLICK ME FOR ALL TERMINOLOGY DEFINITIONS

    NVFLASH

    Nvflash is a low level formatting and imaging tool. If you don't have a working recovery, or have broken the actual boot-loader on your tablet, this is the tool you will need to turn to. For those with unlocked bootloaders (and no fastboot capability), its the best way to root your device. Nvflash is pretty much NVida's version of say an ODIN program but done through cmd prompt. It can save a tablet if one is soft/semi-bricked or maybe full-bricked. To use nvFlash you must first put your tablet in APX mode (think of it as a way to allow you use commands on your computer to control your tablet).

    Refer to this thread for downloads and instructions.



    So off we go.

    ROOTING YOUR TAB

    GO TO SamsunFirmware.com AND DOWNLOAD A STOCK FIRMWARE FOR YOUR TAB VERSION> KEEP IN SAFE PLACE!!!!!!! You are already on the right page just scroll down.
    Courtesy of RoboBear


    GOOGLE I/O & RETAIL WIFI VERSION
    [GTP7510]



    DOWNLOADS compiled and hosted by tphillips

    Content - GT-p7510_USB_Driver | hc-3.1_ota-full_sam_tab_10.1.zip(StockROM) | Odin3_v1.85 | recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 | stockretail.tar.md5(recovery) | Samsung_Galaxy_Tab_10.1_root

    Download FilesForDummies.zip here
    Mirror 1
    Mirror 2



    DONT WIPE during any part of this process. Make sure to put the stock rom from the download package on your device/use CWM and do a backup of your rom before you start anything in case something goes wrong. You have been warned!!!!!

    1. Install samsung USB driver or download samsung Kies and install on your computer which will in turn install the drivers for you.

    2. Run Odin.exe, choose PDA and point it to recovery.md5 file.

    3. Connect tab via usb to your computer while in downloading mode then hit start in Odin on computer after connection has been established. Run, wait then reboot.

    4. Connect tab to computer in usb storage mode (make sure usb debugging is off in tab settings) copy root exploit (Samsung_Galaxy_Tab_10.1_root.zip) to you tablet and take note of where it is. You can skip this part i fyou downloaded this file with your tablet.. Turn off tab. Reboot into bootloader again but this time go to recovery. Select to install zip from SDcard. navigate to where the root.zip is. Install the root.zip. Reboot into android. Your tablet is rooted.

    5. Done.

    You can also refer to this well made Video showing the whole procedure or this other awesome video by Dansan682.


    RETAIL 3G
    [GTP7500]


    1. Download this Root.zip file to your tablet and move it to root directory of tablet storage. (you can also download on comp. then transfer to tablet)

    2. Reboot tab and go into recovery mode and apply the root.zip you just downloaded.

    3. Then reboot

    rooted already

    For CWM

    1. After rooting download and install Rom Manager from market.

    2. open Rom Manager app and have it install clockwork Mod to your device, you should see your device listed within Rom manager.

    3. Done.

    Courtesy of Robobear

    RETAIL 4G
    [GTP7500]
    courtesy of poitee

    Downloads

    Kernel.zip
    Recovery.zip

    1. Copy Files to root of device storage.
    2. Boot into Bootloader mode and navigate to and enter recovery mode.
    3. Apply Kernel.zip then recovery.zip
    4. reboot.....Done.

    UNROOTING & RESTORING STOCK RECOVERY

    1. Using CWM Flash the stock rom for your device. This unroots your device and basically makes it like a brand new tablet.

    2. Use Odin to flash the stock recovery from the filesfordummies.zip.

    3. Done, your device is exactly how it was when you picked it up.


    FLASHING ROMS AND KERNELS


    This is pretty easy as long as you have CWM on your device.

    Simply boot CWM recovery, navigate to either update/instal zip from SDcard (pls adhere to ROM/kernel install instructions) and flash the .zip file of the ROM or kernel.

    I will update this section with links to all the existing and stable ROMs and kernels as the become available. I will advice that you hold off on the kernels if you can as every stable kernel will eventually get cooked into a ROM unless of course you want to help test them or be on the bleeding edge :).

    AVAILABLE ROMS & KERNELS
    LEGEND

    - WIFI
    - 4G
    - 3G

    ★ - Custom ROM
    - Kernel

    If your Device is supported the stars will tell you all you need to know.

    [ROM]Stock US Retail WiFi in case something goes wrong :)
    [Solution] HC 3.1 OTA Stock ODIN
    [ROM]Stock|EU|Wifi|Retail|Touchwiz
    [ROM][STOCK][ARABIC][AUG'13]W/ Official TOUCHWIZ
    [ROM][CWM] 3.1|WiFi|Touchwiz UX|DEODEXED
    [ROM][CWM] 3.1|WiFi|Touchwiz UX [UPDATE: New WiFi Base Rom]
    [ROM][CWM]3.1|WiFi|Bonsai ROM|ToucWiz option|
    [ROM][CWM]3.1| Blazar TW Rom|OC 1.6GH Kernel|Prerooted| by Poitee
    [ROM] [CWM]3.1|StarBurst ROM| by PhantomHacker
    [ROM][CWM][EUR][3G] BroodComb G-P7500 XWKG9 [ALPHA]
    [ROM]Task650's KME ROM UEKME Touchwhiz
    [KERNEL] 3.1|WiFi|OC 1.4GHZ| by Pershoot
    [ROM] LiquidSpeed>>> New!!!
    [KERNEL] 3.1|WiFi|OC1.6GHZ|Voltage Control|Voodoo Sound|CIFS-NTFS| by Poitee
    [TABUNTU] Galaxy Tab 10.1 NATIVE Ubuntu WIFI now with a video




    IRC ONLINE CHAT

    Drop in HERE if you need some Help :). #gtab


    ROM/KERNEL/THEMES/UPDATES BETA TESTING!!!!

    Ever wanted to get whats coming before anyone else (never mind the small issue of being a guinea pig :) ) Well here is your chance. In this section I will put up the contact info of any dev currently looking for testers and for a limited duration, once the devs has all their testers his link will be closed. You can also think of this section as a great way to see what is coming and what stage of development its in. So stop just downloading stuff people, now you can actually really contribute to making what gets released the best it can be and as bug free as possible.


    FAQ

    Be sure to ask whatever questions you have in relation to anything and any problems you come across. But please start every question you have with either a

    (Q) basically letting me know its a question or a
    (P) letting me know its a problem

    I will put up all your questions or problems on here so everyone can see them and the answers or fixes . this way people won't have to filter through tons of pages to get help.


    (Q) Should I follow these instructions for an IO edition tab? Or should I just use the fastboot flash [cwm recover] and flash the zips through that?
    (A) This method will work on the IO version.

    (Q) kernel 2.6.36.4 is a NO-GO for the 3G version?
    (A) Yes, it doesn't work on the 3G version yet.

    (Q) If my tab ins locked does that mean i cant flash kernels on it?
    (A) You can flash anything as long as you have a recovery that will support it. In our case CWM. Being locked and unlocked really only stops you from flashing stuff "easily" but since we can change the recovery, we can flash anything.

    (Q) Does the Odin file wipe tab?
    (A) No. All Odin is doing here is flashing a new recovery to your tab. Nothing more.

    (P) Can't see tablet as USB storage device on Mac.
    (A) Unfortunately Android and Macs don't play nice... you best bet is to use dropbox or a simple bluetooth transfer to transfer files from your mac to your tablet. Then on your Tab use a file manager app to move your files to where you want them to be. For now. Another option is to download everything that requires you using CWM with your tablet so its all already there. So in CWM all you have to do is navigate to your downloads folder. I just created a folder called mods and I have them all there.

    (P) Stuck in BootLoop after Flashing ROM via Odin.
    (A) You should use nvFlash to falsh CWM if you don't still have it then do a full wipe of your device including reformating all partions in mounts and storage except the boot partition then using Odin install a stock Rom on your device.

    (P) I messed things up on my LTE tab and I now somehow dont have a recovery mode anymore!!!!!
    (A) Go Here and scroll to post #4 and follow tijayz instructions.... make sure to thank him!!!


    USER TIPS AND RECOMMENDED APPS

    TIPS

    1. Working Hulu

    2. How to utilize the entire screen for setting widgets and icons without the 1inch gap on the sides? Use ADW launcher EX

    3. Rotation Lag Fix

    4. Look here for a Mod to permanently set your browser user agnet to desktop. No more mobile sites.


    RECOMMENDED APPS!!!!!go on!!, find an awesome app and suggest it to be added to this list!!! Only android market or direct .apk links so isers can download and install straight from their devices :)

    Titanium BackUp
    Circle Launcher
    ADW Launcher EX
    Beautiful Widgets
    CNN
    Minimalistic Text
    Thumb Keyboard
    Tablet Keyboard
    XBMC
    PLEX
    Playstation Emulator
    SNES emulator
    Multipicture Live wallpaper. Kiss weirdly cropped wallpapers goodbye :)
    Wallpaper Slideshow
    Dolphin Browser HD
    Pulse news Reader
    AutoDesk SketchBook Pro
    Feedly
    File Manager HD (honeycomb)


    All credit goes to all the awesome devs and members of xda. I have done nothing but make this thread. :)
    4
    DEV CENTRE

    This section will have a host of developer specific tools and even tutorials. XDA making it easier for XDA?????? :)

    Good Times....

    To start things off

    APK Manager: Honeycomb Edition by tphillips
    2
    Hi to all,

    First of all big thanks and credits for Lorddeff07 for this extraordinary thread.

    Since I am very long in android world and currently my phone is Samsung Galaxy S II, I decided to buy this beautiful tab.

    Today I got deliver 3G version (P7500). I noticed that rooting, flashing our tabs is not so quite easy as for galaxy s phones.

    I wanted to root my 3G version (P7500) using your guide from first post




    Although DL link is broken, so can u upload it again mate or directs us to some other guide for rooting and CWM for P7500 models.

    Also, as I saw, currently there isn't any custom rom for P7500 models? Am I right or I am missing something?

    Thank you so much for your time replaying my post and for your work toward community


    Kind regards,
    Vert

    hi vert, i've send the reply to lordeff but when i rechecked my sent item i can't find the reply i gave him... so anyway heres an update on P7500 ROOT:

    i use this file : http://db.tt/plhe1bq

    from this Thread RIZNATCK

    but basically since P7500 already on 3.1, i just put the root exploit.zip on my root sd.. then reboot into recovery (power + DOWN)

    just apply zip then you'll be rooted.. simple as that... no odin no nvflash no mumbo jumbo... lucky us 3G version huh?

    then CWM also same.. i saw one guy (forgot where, but he's around here) just mention download ROM manager to install CWM.. so i thought what the heck i'm rooted now so might as well as try... and it worked! so yea LOL...
    2
    I'm just going to copy exactly waht I typed in the IRC -- I'm stuck without being able to reboot into recovery with an I/O tab. Also cannot get fastboot to work

    - i got some help from here earlier but now i'm stuck again in rooting/flashing a custom rom on the IO edition
    <slobdogg> i went through the ODIN process to revert to 3.0.1, then was able to adb reboot recovery and install the root file
    <slobdogg> afterwards i installed clockwork mod using RM, and then did the update to a 3.1 OTA file on XDA
    <slobdogg> now i'm supposed to reboot into recovery to reinstall root but i cannot
    <slobdogg> even in ADB if i reboot recovery it just restarts the device...also, I cannot enter recovery through the Vol Down + Power method, just fastboot and odin
    <slobdogg> so im right back where I was (3.1 with no root)

    in order to do adb reboot recovery you need a rooted boot.

    flash the latest tools pack, and you will get root/adb root shell/busybox,dropbear,ssh,etc.,etc.

    you need to get CWM or the stock IO recovery on the device, prior to being able to flash.
    1
    Thanks so much. But the download link doesnt work. Would appreciate it if you could get it working! Looking forward to flashing roms!

    EDIT:Nevermind-its working

    Sorry, try again... its working on my end though.