[Q] finding the right firmware/ruu

Search This thread

whimful

New member
Jan 28, 2014
4
0
status: HTC One X, s-off, unlocked, no reliable firmware or ROM

the last things I've done are to follow steps in this thread: http://xdaforums.com/showthread.php?t=2598659
synopsis:
  • unlocked phone, changed CID to HTC__E11,
  • relocked phone, flashed firmware 3.14.401.31, ran RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed.exe
  • unlocked phone, flashed CWM recovery 5.8.4.0

problem: ROM will not start up and run reliably. I can't start recovery from bootloader, so I can't install another rom.

current getvar all:
Code:
version: 0.5a
version-bootloader: 1.39.0000
version-baseband: 5.1204.162.29
version-cpld: None
version-microp: None
version-main: 3.14.401.31
serialno: FA2A4W102453
imei: 35399505028163
product: endeavoru
platform: HBOOT-T30S
modelid: PJ461****
cidnum: HTC__E11
battery-status: low
battery-voltage: 3527mV
devpower: 0
partition-layout: None
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
 

whimful

New member
Jan 28, 2014
4
0
further details

further history:
  • phone was imported into new zealand from unknown origin
  • when I started working on the phone, I remember is having CID: 11111111, and had HBOOT 0.96
  • I think Hong Kong zoned firmware and RUU 1.29.708.15 were a combination which allowed me entry to CWM successfully, though low hboot version limited me from flashing cyanogenmod 10.1/ 10.2. Didn't try other ROMs
  • when I was flashing earlier, the battery charge was above 4000mV, it seems to have lost a lot of charge overnight

any help or advice around finding the right firmware/RUU that might help me install a working ROM would be amazing.
if I'm barking up the wrong tree also happy to explore other leads.
thanks in advance
 

big noob

Senior Member
Oct 1, 2010
475
89
Classified
okey..for working recovery download cwm.img and flash it from FASTBOOT..then you can restore stock backup or flash custom rom..

Sent from my EndeavorU using Tapatalk 2
 

Thant

Senior Member
Apr 25, 2010
2,413
729
Sofia
further history:
  • phone was imported into new zealand from unknown origin
  • when I started working on the phone, I remember is having CID: 11111111, and had HBOOT 0.96
  • I think Hong Kong zoned firmware and RUU 1.29.708.15 were a combination which allowed me entry to CWM successfully, though low hboot version limited me from flashing cyanogenmod 10.1/ 10.2. Didn't try other ROMs
  • when I was flashing earlier, the battery charge was above 4000mV, it seems to have lost a lot of charge overnight

any help or advice around finding the right firmware/RUU that might help me install a working ROM would be amazing.
if I'm barking up the wrong tree also happy to explore other leads.
thanks in advance

first of all flash again the same RUU 3.14.401.31 after this receive all update to latest JB and after this install Philz recovery and custom rom the 3.14 is not the lastest firmware for the HOX it is 4.20.401.3
 
  • Like
Reactions: whimful

ahmed309

Member
Jan 31, 2014
30
0
status: HTC One X, s-off, unlocked, no reliable firmware or ROM

the last things I've done are to follow steps in this thread: http://xdaforums.com/showthread.php?t=2598659
synopsis:
  • unlocked phone, changed CID to HTC__E11,
  • relocked phone, flashed firmware 3.14.401.31, ran RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed.exe
  • unlocked phone, flashed CWM recovery 5.8.4.0

problem: ROM will not start up and run reliably. I can't start recovery from bootloader, so I can't install another rom.

current getvar all:
Code:
version: 0.5a
version-bootloader: 1.39.0000
version-baseband: 5.1204.162.29
version-cpld: None
version-microp: None
version-main: 3.14.401.31
serialno: FA2A4W102453
imei: 35399505028163
product: endeavoru
platform: HBOOT-T30S
modelid: PJ461****
cidnum: HTC__E11
battery-status: low
battery-voltage: 3527mV
devpower: 0
partition-layout: None
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0

can u guide me how u changed ur cid because i also want to change my cid i am using one x with CID Orange_001
 

Thant

Senior Member
Apr 25, 2010
2,413
729
Sofia
can u guide me how u changed ur cid because i also want to change my cid i am using one x with CID Orange_001

fastboot oem writecid 11111111

11111111 - Super CID other CID you can check in nandroid backup thread mine is HTC__032 x.xx.401.x WWE base
 
Last edited:

whimful

New member
Jan 28, 2014
4
0
phone no longer booting

thanks for everyone's suggestions.
since the first post I haven't been able to try anything, because phone seems unresponsive (will not boot at all).

I've tried leaving it all night plugged into a wall charger (while off).

If it is battery, I'm aware of charging issues this phone has and the batchfile/ cwm 5.8.4.0 workarounds, but I can't get into recovery nor bootloader. If it's charge is there any way to get the phone enough charge?

Is the phone bricked?
 

whimful

New member
Jan 28, 2014
4
0
phone now has some charge, still being awkward

ok have access to bootloader again. I'm trying rerunning the RUU, but having trouble... RUU tries to restart phone but fails.

I'm wondering if i've misunderstood how the region matters. the only stability i have seen is with old honkkong region firmware and old RUU (RUU_ENDEAVOR_U_ICS_40_hTC_Asia_HK_1.29.708.15_Radio_2.1204.122.17_release_268338_signed.exe)

can anyone give me a clear idea of whether using x.xx.401.xx on an s-off phone makes any difference ...
or should i be looking for x.xx.708.xx ruu and 708/hongkong firmware?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    further history:
    • phone was imported into new zealand from unknown origin
    • when I started working on the phone, I remember is having CID: 11111111, and had HBOOT 0.96
    • I think Hong Kong zoned firmware and RUU 1.29.708.15 were a combination which allowed me entry to CWM successfully, though low hboot version limited me from flashing cyanogenmod 10.1/ 10.2. Didn't try other ROMs
    • when I was flashing earlier, the battery charge was above 4000mV, it seems to have lost a lot of charge overnight

    any help or advice around finding the right firmware/RUU that might help me install a working ROM would be amazing.
    if I'm barking up the wrong tree also happy to explore other leads.
    thanks in advance

    first of all flash again the same RUU 3.14.401.31 after this receive all update to latest JB and after this install Philz recovery and custom rom the 3.14 is not the lastest firmware for the HOX it is 4.20.401.3