We want to introduce our 2nd App - DrainGuard.
German Version
Some may know the Tasker script which I have written for the DesireHD; this was the basic idea to be converted into an independent app. Of course with much more setting possibilities which would not have been possible with Tasker.
What DrainGuard is able to do?
One of the main worries with smartphones is the battery consumption. The fact that a smartphone uses battery if you work with it is quite clear. Therefore this consumption is to neglect - the more it is used, the more it uses and the shorter reaches the battery.
The main saving possibilities are therefore in standby.
DrainGuard should help you to watch the consumption in standby. Standby? The time between a ScreenOff and a ScreenOn. DrainGuard informs the user when turning the display on about the battery consumption. This is quite exact configurable, a 2-stage log file is provided if requested, when a too high drain occurs in standby the user is notified, some values can be displayed via minimalisticText widget.
The intelligence of DrainGuard - the special in it:
It would be easy to indicate "only" the difference between ScreenOff and On and would also be not very expressively.
A small example:
Take an average drain in standby of 1% / h.
if you dont use the phone for 5 hours -> 5% of battery consumption
If you use it now for 1h you get ex. +/-15% drain, in the next 1 hour of standby it DOES NOT use ONLY 1% as before, but approx. +/-3-4%. The battery needs apparently "to calm down" for some time again. Thats the 1st point of Drainguard. This "calming down" can be skipped.
Another problem of measurement are the short ScreenOn's. ex. "what's the time?" “have I missed a phone call / SMS?” or a short telephone call etc....
These short breaks would interrupt the measurement which would not be necessary. The 2nd point of DrainGuard: these short ScreenOn's can also be skipped.
The result of the measurements will be shown via notifications or via toasts (the small popups in android) when the screen is turned back on.
Further Instructions and Infos on our Homepage: CLICK ME
The App is available as TRIAL (Free) version in market. TRIAL Limitations: Only fully functionable from 100-70 % battery.
TRIAL:
Market-Link
The PRO Key App is available for 0,89 EUR in market. Just install it and the TRIAL automatically becomes a FULL Version.
PRO Key:
Market Link
Please try the TRIAL Version until you are sure, it works properly on your device!!.
Edit:
TRIAL APK uploaded to the Thread. It is not recommended to use this version because of no update notification on a new release via market. Only use this APK if you can not download it via market!
Edit2:
How to get a minimalistic Text widget work with DrainGuard?
1.) Please download ZIP from attachment section.
2.) Then put the files in the ZIP to your SDCard into the folder "MinimalisticTextPreferences"
3.) Create a minimalisticText Widget on your screen. 3x1
4.) The settings will be opened, scroll down, press Restore(?) - its called "Wiederherstellen" in german
5.) Select a preference ending with "-calc"
6.) Repeat steps for all files in ZIP, so it will look like my screenshot.
Thats it. The widget should be updated after at least a minute.
German Version
Some may know the Tasker script which I have written for the DesireHD; this was the basic idea to be converted into an independent app. Of course with much more setting possibilities which would not have been possible with Tasker.
What DrainGuard is able to do?
One of the main worries with smartphones is the battery consumption. The fact that a smartphone uses battery if you work with it is quite clear. Therefore this consumption is to neglect - the more it is used, the more it uses and the shorter reaches the battery.
The main saving possibilities are therefore in standby.
DrainGuard should help you to watch the consumption in standby. Standby? The time between a ScreenOff and a ScreenOn. DrainGuard informs the user when turning the display on about the battery consumption. This is quite exact configurable, a 2-stage log file is provided if requested, when a too high drain occurs in standby the user is notified, some values can be displayed via minimalisticText widget.
The intelligence of DrainGuard - the special in it:
It would be easy to indicate "only" the difference between ScreenOff and On and would also be not very expressively.
A small example:
Take an average drain in standby of 1% / h.
if you dont use the phone for 5 hours -> 5% of battery consumption
If you use it now for 1h you get ex. +/-15% drain, in the next 1 hour of standby it DOES NOT use ONLY 1% as before, but approx. +/-3-4%. The battery needs apparently "to calm down" for some time again. Thats the 1st point of Drainguard. This "calming down" can be skipped.
Another problem of measurement are the short ScreenOn's. ex. "what's the time?" “have I missed a phone call / SMS?” or a short telephone call etc....
These short breaks would interrupt the measurement which would not be necessary. The 2nd point of DrainGuard: these short ScreenOn's can also be skipped.
The result of the measurements will be shown via notifications or via toasts (the small popups in android) when the screen is turned back on.
Further Instructions and Infos on our Homepage: CLICK ME
The App is available as TRIAL (Free) version in market. TRIAL Limitations: Only fully functionable from 100-70 % battery.
TRIAL:
Market-Link
The PRO Key App is available for 0,89 EUR in market. Just install it and the TRIAL automatically becomes a FULL Version.
PRO Key:
Market Link
Please try the TRIAL Version until you are sure, it works properly on your device!!.
Edit:
TRIAL APK uploaded to the Thread. It is not recommended to use this version because of no update notification on a new release via market. Only use this APK if you can not download it via market!
Edit2:
How to get a minimalistic Text widget work with DrainGuard?
1.) Please download ZIP from attachment section.
2.) Then put the files in the ZIP to your SDCard into the folder "MinimalisticTextPreferences"
3.) Create a minimalisticText Widget on your screen. 3x1
4.) The settings will be opened, scroll down, press Restore(?) - its called "Wiederherstellen" in german
5.) Select a preference ending with "-calc"
6.) Repeat steps for all files in ZIP, so it will look like my screenshot.
Thats it. The widget should be updated after at least a minute.
Attachments
Last edited: