Error 132 when using RUU

Search This thread
By:
Advanced…
R

raziel024

Senior Member
May 31, 2011
81
4
Right now I'm facing problem to update to stock using RUU.
My version is 2.17.707.3 so I dowload from HTCRUU the file named RUU_ENDEAVOR_U_ICS_40_S_hTC_Asia_WWE_2.17.707.3_Radio_2.1204.135.20_release_278245_signed.exe, but after some operations (reboot to bootloader, etc) gives me an 132 error saying: "Signature error". Why is that?
Also I found other RUU file named RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed.exe, Can i use just this to update to JB?
 
ckpv5

ckpv5

Inactive Recognized Contributor
Feb 11, 2008
14,354
18,301
Kuala Lumpur
Before you proceed, check the actual version no. Go to bootloader in fastboot mode, do command fastboot getvar version-main then you will know which RUU is correct for you.

Example, mine is 3.14.707.24, then RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Ra dio_5.1204.162.29_release_296434_signed.exe is the correct RUU for my device.
Code: 
D:\HTC\fastboot>fastboot getvar version-main
version-main: 3.14.707.24
finished. total time: -0.000s

D:\HTC\fastboot>
 
ckpv5

ckpv5

Inactive Recognized Contributor
Feb 11, 2008
14,354
18,301
Kuala Lumpur
Then follow this procedure to flash the RUU

1) Boot to bootloader in fastboot mode, relock your bootloader - fastboot oem lock
2) Still in fastboot mode, run the RUU follow the updater instruction until it finish.

Important points relock bootloader & run ruu in fastboot
 
R

raziel024

Senior Member
May 31, 2011
81
4
I already do that too. The problem is that after 1 minute, it says ERROR 132, "Signature Problem"
 
ckpv5

ckpv5

Inactive Recognized Contributor
Feb 11, 2008
14,354
18,301
Kuala Lumpur
ERROR 132, "Signature Problem" usually refer to unlocked bootloader. As you said you did relock the bootloader, I have no idea. Maybe someone else can assist you on this.
 
  • Like
Reactions: raziel024
R

raziel024

Senior Member
May 31, 2011
81
4
Quick question. After flash the stock recovery is mandatory to erase the cache using fastboot erase cache?
After relock the bootloader, can I flash the stock recovery?
 
ckpv5

ckpv5

Inactive Recognized Contributor
Feb 11, 2008
14,354
18,301
Kuala Lumpur
Not mandatory but recommended.
You can't flash stock recovery or stock boot.img after you relock the bootloader.
If you need to flash those to you device, do it before you relock the bootloader.
 
  • Like
Reactions: raziel024
leddra2k

leddra2k

Senior Member
Aug 11, 2011
52
9
ckpv5 said:
Not mandatory but recommended.
You can't flash stock recovery or stock boot.img after you relock the bootloader.
If you need to flash those to you device, do it before you relock the bootloader.
Click to expand...
Click to collapse

Im also stuck with this issue! Error 132!!! I cant flash my HOX+ back to stock :( and I need toO!!! hhheelp!!
 
A

armandino

Member
Apr 7, 2007
39
1
i have htc one x 4.0.3
fastboot getvar version-main
device >
1.29.401.12
total time: 0.010s

The bootloader is relocked and the Hboot is 0.95

tried to upgrade to JB 4.1 with RUU_ENDEAVOR_U_JB_45_S_hTC_EUROPE_WWE_3.14.707.24_Ra dio_5.1204.162.29_release_296434_signed.exe but wont finish due to a 132 signature problem error...

What are the steps i have to do ?

best regards
 
Last edited:
hpnxfox

hpnxfox

Senior Member
Mar 11, 2011
158
50
Slavonski Brod
leddra2k said:
Im also stuck with this issue! Error 132!!! I cant flash my HOX+ back to stock :( and I need toO!!! hhheelp!!
Click to expand...
Click to collapse

Ok, just to ask, this is HTC One X section, and in quote i can see that you have HTC One X +? Did you download RUU for HTC one X or HTC One X +?

Because guide for back to stock with RUU is just like previous members wrote... go into fastboot, relock bootloader, run RUU (with administrators rights in vista or win7)..


And for the others: http://xdaforums.com/showthread.php?t=1859714
Stock OTA and RUU: http://androidfiles.org/ruu/?dir=Endeavor


IMPORTANT from the link:

Get the RUU file required for your device:
Make sure that USB debugging is enabled (Settings/Developer options). In order to determine which ruu file you require, boot your device into bootloader mode (Power off and then restart device by holding Power and Volume Down button together). Connect to pc via USB and check that device shows FASTBOOT USB on screen. Enter the following command in command prompt:

Code: fastboot getvar version-main

If for example this command returns the value 1.29.401.x then you need to use that file or you can use a higher numbered file from the same region eg 2.17.401.x. NOTE: You can't use a lower numbered file eg 1.26.401.x and you also can't use a file from a different region eg 2.17.707.x.:

PROCESS :

1. Boot your phone to fastboot mode by holding power+vol down button for 10 secs..(if your phone keeps restarting in normal phone mode, go to Setting>Power and untick Fast boot)

2. Plug your phone into your PC and open a Command Prompt.

(windows XP - Click Start > Run > type CMD in box then press OK
(Windows 7 - Click Start > type CMD in search box then press Enter)

3. cd to the location of your fastboot files folder

4. Relock bootloader - type command:

Code: fastboot oem lock

The phone will then restart into fastboot again showing "RELOCKED"

6. On your pc run the RUU (vista and win7 run as administrator) that you downloaded earlier, follow the steps as prompted and patiently wait for it to finish.

REMEMBER your phone should be charged ABOVE 50% (Full battery is advice) AND if the RUU or restore is INTERRUPTED 4 any reason during restore your
phone will be PERMANENTLY BRICKED..
 
Last edited:
A

armandino

Member
Apr 7, 2007
39
1
I have successfuly installed the rom 4.1 from insertcoin i have update the hboot and the right firmware. Thebproblem im facing is the phone keeps rebooting, the installation of the rom ended with no errors... i have full wiped the phone formated the cache... amy idea how to fix the auto reboot? Thanks
 
vin4yak

vin4yak

Senior Member
Mar 10, 2013
4,351
2,423
31
Mumbai
vinu.info
armandino said:
I have successfuly installed the rom 4.1 from insertcoin i have update the hboot and the right firmware. Thebproblem im facing is the phone keeps rebooting, the installation of the rom ended with no errors... i have full wiped the phone formated the cache... amy idea how to fix the auto reboot? Thanks
Click to expand...
Click to collapse

It's because you didn't flash the correct boot.img or you didn't full wipe your device.. start over and follow these steps:

1. flash boot.img from rom.zip and then fastboot erase cache
2. Go to recovery and flash this script : http://d-h.st/B2K
3. Flash rom.zip
4. Reboot

PS: From next time, please don't highjack other people's thread by asking questions not related to the topic! If you need further help, open a new topic!
 
L

ladylane100

Member
Apr 9, 2015
5
0
F:\>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-baseband: 1.46.40.0721
(bootloader) version-cpld: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) product: a11_chl
(bootloader) platform: hTCBmsm8226
(bootloader) cidnum: SPCS_002
(bootloader) battery-status: good
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 6a60e19e
(bootloader) gencheckpt: 0
 
Thant

Thant

Senior Member
Apr 25, 2010
2,413
729
Sofia
ladylane100 said:
F:\>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-baseband: 1.46.40.0721
(bootloader) version-cpld: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) product: a11_chl
(bootloader) platform: hTCBmsm8226
(bootloader) cidnum: SPCS_002
(bootloader) battery-status: good
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 6a60e19e
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse

Strange I think you are not with ONE X international we never have this this radio 1.46.40.0721 and for first time I see this CID SPCS_002
 
M

mmustafeezz

Member
Feb 23, 2015
13
0
(bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) imei: removed by me
(bootloader) version-main: 3.36.709.3
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U11440792_97.00.51203G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: 11111111

!!!!!!!!!!!!!!!!!!I AM ALSO GETTING ERROR 132 WITH HTC M9 RUU DOWNLOADED FROM HTC OFFICIAL SITE...!!!!!!!!!!!!!!!!!!
RUU_HIMA_UL_N70_SENSE80_ATT_MR_NA_Gen_Unlock_4.30.617.12.exe
 
You must log in or register to reply here.

Similar threads

mike1986.
[ROM] Android Revolution HD 33.1 | High Quality & Performance | Sense 5 | 4.18.401.3
Replies
50K
Views
9M
C
cmaz
W
JellyBean - OTA/ETA's - Confirmed JB Updates [RUU Update Method Included]!!!
Replies
3K
Views
641K
W
Wilks3y
X
  • Poll
[KERNEL][13/09/13][306|188v4][3.xx][AOSP & SENSE4][S2W][GAMING][BATTERY][UV]XM-Kernel
Replies
7K
Views
875K
kassaaam
kassaaam
BugsyLawson
  • Locked
Endeavor RUU, OTA and Stock Nandroid Mirrors
Replies
205
Views
205K
dottat
dottat
GabrielSousa
[TUT] How to upgrade HOX with a RUU(hboot.img, etc..) after installed a custom rom
Replies
412
Views
242K
GabrielSousa
GabrielSousa

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 1
    ckpv5
    ckpv5
    ERROR 132, "Signature Problem" usually refer to unlocked bootloader. As you said you did relock the bootloader, I have no idea. Maybe someone else can assist you on this.
    View
    1
    ckpv5
    ckpv5
    Not mandatory but recommended.
    You can't flash stock recovery or stock boot.img after you relock the bootloader.
    If you need to flash those to you device, do it before you relock the bootloader.
    View

New posts