Due to popular demand, it's now time for a thread like this.
Post #1 - Governors
Post #2 - I/O Schedulers
#1 - Governors
So, what's a governor?
There are many governors around, some for single-cores, some for dual-cores which I won't even refer to (jRCU). In stock you can find 5 governors, in Quasar kernel you can find much more. Most android and xda users don't even know half of governors I'll list as there is no android kernel out there with more governors than Quasar, only one has the same amount and this is a kernel made by my friend and fellow portuguese franciscofranco.
Listing of knzo-known governors:
Legend: & - default | @ - disabled by default | * - exists in stock kernel | + - added in Quasar kernel
And now the official summary for each and brief comment by myself:
Ondemand:
Ondemand is the default choice due to its balanced settings which offers a good compromise between battery and performance. However, it has no suspend profiles and falls a bit short on performance in smartphones.
Powersave:
Powersave sets the max frequency at the same clock as the min frequency. Impossible for daily usage for obvious reasons. Used usually with SetCPU screen-off profiles in combo with Ondemand.
Userspace:
Userspace lets you manually set the frequencies. To be completely honest, I've never used it and I've never heard of anyone who uses it. I'm completely off on how it fares or if it even works or any of its kinks.
Conservative:
Conservative is a slower Ondemand when it comes to ramping. For example, when you turn on the phone and start interacting with it, Ondemand will increase frequency until it reaches max at x speed. Conservative will do the same at x/2. Faster the ramping the more battery it consumes so conservative while a worse governor for performance it's also a good one for battery.
Performance:
If Powersave governor is Yin, this one is Yang. It sets the min frequency the same as max frequency so the phone is always at max power. This is usually used with SetCPU profiles for when charging or plugged to computer. For obvious reasons can't be used in daily usage.
Interactive:
While Conservative is a slower Ondemand, Interactive is a faster one. Ramping will be slightly faster so interaction will seem more snappy with battery comsumption just increasing a tiny bit. This has been the most popular governor for the past year.
InteractiveX:
As you can see in the summary, this is Interactive with some modifications by imoseyon. Now instead of using the dirty SetCPU profiles method of locking the frequency to minimum when phone is asleep, the own governor will do that which is a cleaner method and with a better ramping management when coming out of sleep. Basically, it has Interactive's performance with better battery.
Smartass:
This one has been increasingly popular and it's becoming the favorite one for Q3-4 2011. Smartass is based on Interactive but with some modifications, as well as built-in profiles. Recently, Erasmux released this v2 which by what people are saying it's very good. I suggest you go to this link for more informations. It's probably Quasar's best governor at the moment, along with Minmax.
Smoothass:
One more jewel from Erasmux. As far as I know this is a Smartass v1 tuned for a more aggressive ramping, which means, more performance and snappiness, less battery.
BrazilianWax:
Someone correct me if I'm wrong but this is basically the same as Smoothass.
SavagedZen:
Another Smartass-based kernel with many modifications aiming to attain both better battery and performance. And it succeeds in my opinion. I've used it in past devices, it's a very good overall governor, a balanced option.
Minmax:
This governor was a very pleasant surprise. Although an adaptation of Conservative governor it has probably the best performance of them all. Might fall shorter on battery than Smartass v2 but I owe it my best experiences in terms of snappiness so far, reason why I selected it as default governor for Nova. My personal favorite until I can draw a conclusion from using Smartass v2.
Scary:
This is just a weird governor. It's based on Conservative which has a slower ramping than Ondemand but then again it has Smartass elements which is a governor with one the fastest rampings. I've heard some people like it but alas I never tried it myself.
To sum up:
(in my humble opinion)
In attachment you can also find some benchmark's statistics for P500's franco.Kernel.
Post #1 - Governors
Post #2 - I/O Schedulers
#1 - Governors
So, what's a governor?
Code:
Consider a CPU, the processor of Optimus Black. Well, this CPU operates at
different frequencies (on stock: 300, 600, 800 and 1000 Mhz) and we usually
say it's a 1 Ghz (1000 Mhz) processor because that's the max frequency it
can go 100% stable.
Now, a governor is a CPUFreq driver. Like the name suggests, it is what
decides when to be on full speed at max frequency or when to be at min
or mid and how fast should it reach the max/min, should it be almost insta
and provide a good smoothness overall? Should it take longer and go 200
Mhz at a time and preserve battery? This and more is what a governor is.
There are many governors around, some for single-cores, some for dual-cores which I won't even refer to (jRCU). In stock you can find 5 governors, in Quasar kernel you can find much more. Most android and xda users don't even know half of governors I'll list as there is no android kernel out there with more governors than Quasar, only one has the same amount and this is a kernel made by my friend and fellow portuguese franciscofranco.
Listing of knzo-known governors:
- Ondemand *&
- Powersave *@
- Userspace *
- Conservative *
- Performance *
- Interactive +
- InteractiveX +
- Smartass +
- Smoothass +
- BrazilianWax +
- SavagedZen +
- Minmax +&
- Scary +
Legend: & - default | @ - disabled by default | * - exists in stock kernel | + - added in Quasar kernel
And now the official summary for each and brief comment by myself:
Ondemand:
Code:
/*
* drivers/cpufreq/cpufreq_ondemand.c
*
* Copyright (C) 2001 Russell King
* (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>.
* Jun Nakajima <jun.nakajima@intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
Ondemand is the default choice due to its balanced settings which offers a good compromise between battery and performance. However, it has no suspend profiles and falls a bit short on performance in smartphones.
Powersave:
Code:
/*
* linux/drivers/cpufreq/cpufreq_powersave.c
*
* Copyright (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
Powersave sets the max frequency at the same clock as the min frequency. Impossible for daily usage for obvious reasons. Used usually with SetCPU screen-off profiles in combo with Ondemand.
Userspace:
Code:
/*
* linux/drivers/cpufreq/cpufreq_userspace.c
*
* Copyright (C) 2001 Russell King
* (C) 2002 - 2004 Dominik Brodowski <linux@brodo.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
Userspace lets you manually set the frequencies. To be completely honest, I've never used it and I've never heard of anyone who uses it. I'm completely off on how it fares or if it even works or any of its kinks.
Conservative:
Code:
/*
* drivers/cpufreq/cpufreq_conservative.c
*
* Copyright (C) 2001 Russell King
* (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>.
* Jun Nakajima <jun.nakajima@intel.com>
* (C) 2009 Alexander Clouter <alex@digriz.org.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
Conservative is a slower Ondemand when it comes to ramping. For example, when you turn on the phone and start interacting with it, Ondemand will increase frequency until it reaches max at x speed. Conservative will do the same at x/2. Faster the ramping the more battery it consumes so conservative while a worse governor for performance it's also a good one for battery.
Performance:
Code:
/*
* linux/drivers/cpufreq/cpufreq_performance.c
*
* Copyright (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
If Powersave governor is Yin, this one is Yang. It sets the min frequency the same as max frequency so the phone is always at max power. This is usually used with SetCPU profiles for when charging or plugged to computer. For obvious reasons can't be used in daily usage.
Interactive:
Code:
/*
* drivers/cpufreq/cpufreq_interactive.c
*
* Copyright (C) 2010 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Author: Mike Chan (mike@android.com)
*
*/
While Conservative is a slower Ondemand, Interactive is a faster one. Ramping will be slightly faster so interaction will seem more snappy with battery comsumption just increasing a tiny bit. This has been the most popular governor for the past year.
InteractiveX:
Code:
/*
* drivers/cpufreq/cpufreq_interactive.c
*
* Copyright (C) 2010 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Author: Mike Chan (mike@android.com) - modified for suspend/wake by imoseyon
*
*/
As you can see in the summary, this is Interactive with some modifications by imoseyon. Now instead of using the dirty SetCPU profiles method of locking the frequency to minimum when phone is asleep, the own governor will do that which is a cleaner method and with a better ramping management when coming out of sleep. Basically, it has Interactive's performance with better battery.
Smartass:
Code:
/*
* drivers/cpufreq/cpufreq_smartass2.c
*
* Copyright (C) 2010 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Author: Erasmux
*
* Based on the interactive governor By Mike Chan (mike@android.com)
* which was adaptated to 2.6.29 kernel by Nadlabak (pavel@doshaska.net)
*
* SMP support based on mod by faux123
*
* requires to add
* EXPORT_SYMBOL_GPL(nr_running);
* at the end of kernel/sched.c
*
*/
This one has been increasingly popular and it's becoming the favorite one for Q3-4 2011. Smartass is based on Interactive but with some modifications, as well as built-in profiles. Recently, Erasmux released this v2 which by what people are saying it's very good. I suggest you go to this link for more informations. It's probably Quasar's best governor at the moment, along with Minmax.
Smoothass:
Code:
/*
* drivers/cpufreq/cpufreq_smoothass.c
*
* Copyright (C) 2010 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Author: Erasmux
*
* Based on the interactive governor By Mike Chan (mike@android.com)
* which was adaptated to 2.6.29 kernel by Nadlabak (pavel@doshaska.net)
*
* requires to add
* EXPORT_SYMBOL_GPL(nr_running);
* at the end of kernel/sched.c
*
*/
One more jewel from Erasmux. As far as I know this is a Smartass v1 tuned for a more aggressive ramping, which means, more performance and snappiness, less battery.
BrazilianWax:
Code:
/*
* drivers/cpufreq/cpufreq_brazilianwax.c
*
* Copyright (C) 2010 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Author: Erasmux
*
* Based on the interactive governor By Mike Chan (mike@android.com)
* which was adaptated to 2.6.29 kernel by Nadlabak (pavel@doshaska.net)
*
* requires to add
* EXPORT_SYMBOL_GPL(nr_running);
* at the end of kernel/sched.c
*
*/
Someone correct me if I'm wrong but this is basically the same as Smoothass.
SavagedZen:
Code:
/*
* drivers/cpufreq/cpufreq_savagedzen.c
*
* Copyright (C) 2010 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Author: Joshua Seidel
* Based on the smartass governor by Erasmux
*
* Based on the interactive governor By Mike Chan (mike@android.com)
* which was adaptated to 2.6.29 kernel by Nadlabak (pavel@doshaska.net)
* --Modifications by arescode--
* adapted to stock (1 GHz) frequency by zacharias.maladroit
*
* requires to add
* EXPORT_SYMBOL_GPL(nr_running);
* at the end of kernel/sched.c
*
*/
Another Smartass-based kernel with many modifications aiming to attain both better battery and performance. And it succeeds in my opinion. I've used it in past devices, it's a very good overall governor, a balanced option.
Minmax:
Code:
/*
* drivers/cpufreq/cpufreq_minmax.c
*
* Copyright (C) 2001 Russell King
* (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>.
* Jun Nakajima <jun.nakajima@intel.com>
* (C) 2004 Alexander Clouter <alex-kernel@digriz.org.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This governor is an adapatation of the conservative governor.
* See the Documentation/cpu-freq/governors.txt for more information.
*
* Adapatation from conservative by Erasmux.
*/
This governor was a very pleasant surprise. Although an adaptation of Conservative governor it has probably the best performance of them all. Might fall shorter on battery than Smartass v2 but I owe it my best experiences in terms of snappiness so far, reason why I selected it as default governor for Nova. My personal favorite until I can draw a conclusion from using Smartass v2.
Scary:
Code:
/*
Scary governor based off of conservatives source with some
of smartasses features
For devs - If you're going to port this driver to other devices,
make sure to edit the default sleep frequencies & prev frequencies
or else you might be going outside your devices hardware limits.
*/
This is just a weird governor. It's based on Conservative which has a slower ramping than Ondemand but then again it has Smartass elements which is a governor with one the fastest rampings. I've heard some people like it but alas I never tried it myself.
To sum up:
(in my humble opinion)
- Battery: 1st place - InteractiveX | 2nd place - Smartass | 3rd place - SavagedZen
- Performance: 1st place - Minmax | 2nd place - Smartass2 | 3rd place - SavagedZen
In attachment you can also find some benchmark's statistics for P500's franco.Kernel.
Attachments
Last edited: